| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190227121232.24873-6-benjamin.gaignard@st.com>
Date: Wed, 27 Feb 2019 13:12:30 +0100
From: Benjamin Gaignard <benjamin.gaignard@...com>
To: <broonie@...nel.org>, <robh@...nel.org>, <arnd@...db.de>,
<shawnguo@...nel.org>, <s.hauer@...gutronix.de>,
<fabio.estevam@....com>
CC: <linux-kernel@...r.kernel.org>, <loic.pallardy@...com>,
<benjamin.gaignard@...aro.org>, <kernel@...gutronix.de>,
<linux-imx@....com>, <linux-arm-kernel@...ts.infradead.org>,
Benjamin Gaignard <benjamin.gaignard@...com>
Subject: [PATCH 5/7] bus: domainsctrl: Add driver for STM32 ETZPC controller
STM32 Extended TrustZone Protection Controller (ETZPC) got 3 domains:
- secure: hardware blocks are only accessible by software running on trust
zone.
- non-secure: hardware blocks are accessible by non-secure software (i.e.
linux kernel).
- coprocessor: hardware blocks are only accessible by the corpocessor.
Each hardware block status is defined by a 2 bits field and all of
them are packed into 32 bits registers. ETZPC can manage up to 94
hardware blocks.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@...com>
---
drivers/bus/domains/Kconfig | 7 ++
drivers/bus/domains/Makefile | 1 +
drivers/bus/domains/stm32-etzpc.c | 140 ++++++++++++++++++++++++++
include/dt-bindings/bus/domains/stm32-etzpc.h | 25 +++++
4 files changed, 173 insertions(+)
create mode 100644 drivers/bus/domains/stm32-etzpc.c
create mode 100644 include/dt-bindings/bus/domains/stm32-etzpc.h
diff --git a/drivers/bus/domains/Kconfig b/drivers/bus/domains/Kconfig
index 5ba15f750bee..7afd209e8c4f 100644
--- a/drivers/bus/domains/Kconfig
+++ b/drivers/bus/domains/Kconfig
@@ -4,4 +4,11 @@ config DOMAINS_CONTROLLERS
bool "Support of bus domains controllers"
depends on OF
+config STM32_ETZPC
+ bool "STM32 ETZPC Domain Controller"
+ depends on DOMAINS_CONTROLLERS && MACH_STM32MP157
+ help
+ Select y to enable STM32 Extended TrustZone Protection
+ Controller (ETZPC)
+
endmenu
diff --git a/drivers/bus/domains/Makefile b/drivers/bus/domains/Makefile
index 262338b7cad5..8000de6023a5 100644
--- a/drivers/bus/domains/Makefile
+++ b/drivers/bus/domains/Makefile
@@ -1 +1,2 @@
obj-$(CONFIG_DOMAINS_CONTROLLERS) += domainsctrl.o
+obj-$(CONFIG_STM32_ETZPC) += stm32-etzpc.o
diff --git a/drivers/bus/domains/stm32-etzpc.c b/drivers/bus/domains/stm32-etzpc.c
new file mode 100644
index 000000000000..8a03128a8715
--- /dev/null
+++ b/drivers/bus/domains/stm32-etzpc.c
@@ -0,0 +1,140 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Benjamin Gaignard <benjamin.gaignard@...com> for STMicroelectronics.
+ */
+
+#include <linux/device.h>
+#include <linux/domainsctrl.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/bus/domains/stm32-etzpc.h>
+
+#define ETZPC_DECPROT 0x010
+#define ETZPC_NUM_LOCKS 94
+
+struct stm32_etzpc {
+ struct regmap_field *fields[ETZPC_NUM_LOCKS];
+};
+
+static int stm32_etzpc_set_config(struct device *dev,
+ struct of_phandle_args *out_args)
+{
+ struct stm32_etzpc *etzpc = dev_get_drvdata(dev);
+ int index = out_args->args[0];
+ unsigned int value = out_args->args[1];
+ u32 status;
+
+ if (out_args->args_count != 2)
+ return -EINVAL;
+
+ if (index >= ETZPC_NUM_LOCKS)
+ return -EINVAL;
+
+ if (value > STM32_ETZPC_NON_SECURE)
+ return -EINVAL;
+
+ regmap_field_force_write(etzpc->fields[index], value);
+
+ /* Hardware could denied the new value, read it back to check it */
+ regmap_field_read(etzpc->fields[index], &status);
+
+ if (value != status) {
+ dev_info(dev, "failed to set configuration: index %d, value %d\n",
+ index, value);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct domains_ctrl_ops stm32_etzpc_ops = {
+ .set_config = stm32_etzpc_set_config,
+};
+
+static const struct regmap_config stm32_etzpc_regmap_cfg = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = sizeof(u32),
+ .max_register = 0x3FF,
+ .fast_io = true,
+};
+
+static int stm32_etzpc_probe(struct platform_device *pdev)
+{
+ struct stm32_etzpc *etzpc;
+ struct resource *res;
+ void __iomem *mmio;
+ struct regmap *regmap;
+ int i;
+
+ etzpc = devm_kzalloc(&pdev->dev, sizeof(*etzpc), GFP_KERNEL);
+ if (!etzpc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mmio = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mmio))
+ return PTR_ERR(mmio);
+
+ regmap = devm_regmap_init_mmio(&pdev->dev, mmio,
+ &stm32_etzpc_regmap_cfg);
+
+ for (i = 0; i < ETZPC_NUM_LOCKS; i++) {
+ struct reg_field field;
+
+ /*
+ * Each hardware block status is defined by
+ * a 2 bits field and all of them are packed into
+ * 32 bits registers. Do some computation to get
+ * register offset and the shift.
+ */
+ field.reg = ETZPC_DECPROT + (i >> 4) * sizeof(u32);
+ field.lsb = (i % 0x10) << 1;
+ field.msb = field.lsb + 1;
+
+ etzpc->fields[i] = devm_regmap_field_alloc(&pdev->dev,
+ regmap, field);
+ }
+
+ platform_set_drvdata(pdev, etzpc);
+
+ return domainsctrl_register(&pdev->dev, &stm32_etzpc_ops);
+}
+
+static int stm32_etzpc_remove(struct platform_device *pdev)
+{
+ domainsctrl_unregister(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id stm32_etzpc_of_match[] = {
+ { .compatible = "st,stm32-etzpc" },
+ { /* end node */ }
+};
+MODULE_DEVICE_TABLE(of, stm32_etzpc_of_match);
+
+static struct platform_driver stm32_etzpc_driver = {
+ .probe = stm32_etzpc_probe,
+ .remove = stm32_etzpc_remove,
+ .driver = {
+ .name = "stm32-etzpc",
+ .of_match_table = stm32_etzpc_of_match,
+ },
+};
+
+static int __init stm32_etzpc_init(void)
+{
+ return platform_driver_register(&stm32_etzpc_driver);
+}
+arch_initcall(stm32_etzpc_init);
+
+MODULE_AUTHOR("Benjamin Gaignard <benjamin.gaignard@...com>");
+MODULE_DESCRIPTION("STMicroelectronics STM32 Bus Dommains Controller");
diff --git a/include/dt-bindings/bus/domains/stm32-etzpc.h b/include/dt-bindings/bus/domains/stm32-etzpc.h
new file mode 100644
index 000000000000..93190fa29a9c
--- /dev/null
+++ b/include/dt-bindings/bus/domains/stm32-etzpc.h
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Benjamin Gaignard <benjamin.gaignard@...com> for STMicroelectronics.
+ */
+
+#ifndef _STM32_ETZPC_H_
+#define _STM32_ETZPC_H_
+
+/* ETZPC domains: secure, non-secure or coprocessor*/
+#define STM32_ETZPC_SECURE 1
+#define STM32_ETPCZ_COPRO 2
+#define STM32_ETZPC_NON_SECURE 3
+
+/* ETZPC hard blaokcs index */
+#define STM32_ETZPC_USART1 3
+#define STM32_ETZPC_SPI6 4
+#define STM32_ETZPC_I2C4 5
+#define STM32_ETZPC_RNG1 7
+#define STM32_ETZPC_HASH1 8
+#define STM32_ETZPC_CRYP1 9
+#define STM32_ETZPC_I2C6 12
+#define STM32_ETZPC_CEC 38
+
+#endif /* _STM32_ETZPC_H_ */
--
2.15.0
Powered by blists - more mailing lists