Message-ID: <4e91f7d5-7508-8c1d-707e-e11bf2872163@ti.com>
Date:   Thu, 28 Feb 2019 14:18:26 -0600
From:   Dan Murphy <dmurphy@...com>
To:     Wolfgang Grandegger <wg@...ndegger.com>, <mkl@...gutronix.de>,
        <davem@...emloft.net>
CC:     <linux-can@...r.kernel.org>, <netdev@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v5 1/5] can: m_can: Create a m_can platform framework

Wolfgang

On 2/28/19 2:12 PM, Wolfgang Grandegger wrote:
> 
> Am 14.02.19 um 19:27 schrieb Dan Murphy:
>> Create a m_can platform framework that peripherial
>> devices can register to and use common code and register sets.
>> The peripherial devices may provide read/write and configuration> support of the IP.
>>
>> Signed-off-by: Dan Murphy <dmurphy@...com>
>> ---
>>
>> v5 - Created ops struct, renamed header to m_can.h, updated license and copyright
>> added MODULE_AUTHOR and removed unneeded changes - https://lore.kernel.org/patchwork/patch/1033094/
>>
>>  drivers/net/can/m_can/m_can.h          | 159 ++++++++++++++++++++
>>  drivers/net/can/m_can/m_can_platform.c | 198 +++++++++++++++++++++++++
>>  2 files changed, 357 insertions(+)
>>  create mode 100644 drivers/net/can/m_can/m_can.h
>>  create mode 100644 drivers/net/can/m_can/m_can_platform.c
>>
>> diff --git a/drivers/net/can/m_can/m_can.h b/drivers/net/can/m_can/m_can.h
>> new file mode 100644
>> index 000000000000..36b1b833d41b
>> --- /dev/null
>> +++ b/drivers/net/can/m_can/m_can.h
>> @@ -0,0 +1,159 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
>> +
>> +#ifndef _CAN_M_CAN_H_
>> +#define _CAN_M_CAN_H_
>> +
>> +#include <linux/can/core.h>
>> +#include <linux/can/led.h>
>> +#include <linux/completion.h>
>> +#include <linux/device.h>
>> +#include <linux/dma-mapping.h>
>> +#include <linux/freezer.h>
>> +#include <linux/slab.h>
>> +#include <linux/uaccess.h>
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/io.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/netdevice.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/iopoll.h>
>> +#include <linux/can/dev.h>
>> +#include <linux/pinctrl/consumer.h>
>> +
>> +/* m_can lec values */
>> +enum m_can_lec_type {
>> +	LEC_NO_ERROR = 0,
>> +	LEC_STUFF_ERROR,
>> +	LEC_FORM_ERROR,
>> +	LEC_ACK_ERROR,
>> +	LEC_BIT1_ERROR,
>> +	LEC_BIT0_ERROR,
>> +	LEC_CRC_ERROR,
>> +	LEC_UNUSED,
>> +};
>> +
>> +enum m_can_mram_cfg {
>> +	MRAM_SIDF = 0,
>> +	MRAM_XIDF,
>> +	MRAM_RXF0,
>> +	MRAM_RXF1,
>> +	MRAM_RXB,
>> +	MRAM_TXE,
>> +	MRAM_TXB,
>> +	MRAM_CFG_NUM,
>> +};
>> +
>> +/* registers definition */
>> +enum m_can_reg {
>> +	M_CAN_CREL	= 0x0,
>> +	M_CAN_ENDN	= 0x4,
>> +	M_CAN_CUST	= 0x8,
>> +	M_CAN_DBTP	= 0xc,
>> +	M_CAN_TEST	= 0x10,
>> +	M_CAN_RWD	= 0x14,
>> +	M_CAN_CCCR	= 0x18,
>> +	M_CAN_NBTP	= 0x1c,
>> +	M_CAN_TSCC	= 0x20,
>> +	M_CAN_TSCV	= 0x24,
>> +	M_CAN_TOCC	= 0x28,
>> +	M_CAN_TOCV	= 0x2c,
>> +	M_CAN_ECR	= 0x40,
>> +	M_CAN_PSR	= 0x44,
>> +/* TDCR Register only available for version >=3.1.x */
>> +	M_CAN_TDCR	= 0x48,
>> +	M_CAN_IR	= 0x50,
>> +	M_CAN_IE	= 0x54,
>> +	M_CAN_ILS	= 0x58,
>> +	M_CAN_ILE	= 0x5c,
>> +	M_CAN_GFC	= 0x80,
>> +	M_CAN_SIDFC	= 0x84,
>> +	M_CAN_XIDFC	= 0x88,
>> +	M_CAN_XIDAM	= 0x90,
>> +	M_CAN_HPMS	= 0x94,
>> +	M_CAN_NDAT1	= 0x98,
>> +	M_CAN_NDAT2	= 0x9c,
>> +	M_CAN_RXF0C	= 0xa0,
>> +	M_CAN_RXF0S	= 0xa4,
>> +	M_CAN_RXF0A	= 0xa8,
>> +	M_CAN_RXBC	= 0xac,
>> +	M_CAN_RXF1C	= 0xb0,
>> +	M_CAN_RXF1S	= 0xb4,
>> +	M_CAN_RXF1A	= 0xb8,
>> +	M_CAN_RXESC	= 0xbc,
>> +	M_CAN_TXBC	= 0xc0,
>> +	M_CAN_TXFQS	= 0xc4,
>> +	M_CAN_TXESC	= 0xc8,
>> +	M_CAN_TXBRP	= 0xcc,
>> +	M_CAN_TXBAR	= 0xd0,
>> +	M_CAN_TXBCR	= 0xd4,
>> +	M_CAN_TXBTO	= 0xd8,
>> +	M_CAN_TXBCF	= 0xdc,
>> +	M_CAN_TXBTIE	= 0xe0,
>> +	M_CAN_TXBCIE	= 0xe4,
>> +	M_CAN_TXEFC	= 0xf0,
>> +	M_CAN_TXEFS	= 0xf4,
>> +	M_CAN_TXEFA	= 0xf8,
>> +};
> 
> You moved the register offsets here but not the register flags and
> masks. Why?
> 

I can move this back to the m_can.c.  I had this here for debugging so I can read the m_can registers.
It is a debug artifact.

>> +/* address offset and element number for each FIFO/Buffer in the Message RAM */
>> +struct mram_cfg {
>> +	u16 off;
>> +	u8  num;
>> +};
>> +
>> +struct m_can_priv;
>> +struct m_can_ops {
>> +	/* Device specific call backs */
>> +	int (*clr_dev_interrupts) (struct m_can_priv *m_can_class);
>> +	u32 (*read_reg) (struct m_can_priv *m_can_class, int reg);
>> +	int (*write_reg) (struct m_can_priv *m_can_class, int reg, int val);
>> +	u32 (*read_fifo) (struct m_can_priv *m_can_class, int addr_offset);
>> +	int (*write_fifo) (struct m_can_priv *m_can_class, int addr_offset, int val);
>> +	int (*device_init) (struct m_can_priv *m_can_class);
>> +};
>> +
>> +struct m_can_priv {
>> +	struct can_priv can;
>> +	struct napi_struct napi;
>> +	struct net_device *net;
>> +	struct device *dev;
>> +	struct clk *hclk;
>> +	struct clk *cclk;
>> +
>> +	struct workqueue_struct *wq;
>> +	struct work_struct tx_work;
>> +	struct sk_buff *skb;
>> +
>> +	struct can_bittiming_const *bit_timing;
>> +	struct can_bittiming_const *data_timing;
>> +
>> +	struct m_can_ops *ops;
>> +
>> +	void *device_data;
>> +
>> +	int version;
>> +	int freq;
>> +	u32 irqstatus;
>> +
>> +	int pm_clock_support;
>> +	bool is_peripherial;
>> +
>> +	struct mram_cfg mcfg[MRAM_CFG_NUM];
>> +};
>> +
>> +struct m_can_priv *m_can_class_allocate_dev(struct device *dev);
>> +int m_can_class_register(struct m_can_priv *m_can_dev);
>> +void m_can_class_unregister(struct m_can_priv *m_can_dev);
>> +int m_can_class_get_clocks(struct m_can_priv *m_can_dev);
>> +void m_can_init_ram(struct m_can_priv *priv);
>> +void m_can_config_endisable(struct m_can_priv *priv, bool enable);
>> +
>> +int m_can_class_suspend(struct device *dev);
>> +int m_can_class_resume(struct device *dev);
>> +#endif	/* _CAN_M_H_ */
>> diff --git a/drivers/net/can/m_can/m_can_platform.c b/drivers/net/can/m_can/m_can_platform.c
>> new file mode 100644
>> index 000000000000..d8d51bd64205
>> --- /dev/null
>> +++ b/drivers/net/can/m_can/m_can_platform.c
>> @@ -0,0 +1,198 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// IOMapped CAN bus driver for Bosch M_CAN controller
>> +// Copyright (C) 2014 Freescale Semiconductor, Inc.
>> +//	Dong Aisheng <b29396@...escale.com>
>> +//
>> +// Copyright (C) 2018-19 Texas Instruments Incorporated - http://www.ti.com/
>> +
>> +#include <linux/platform_device.h>
>> +
>> +#include "m_can.h"
>> +
>> +struct m_can_plat_priv {
>> +	void __iomem *base;
>> +	void __iomem *mram_base;
>> +};
>> +
>> +static u32 iomap_read_reg(struct m_can_priv *m_can_class, int reg)
>> +{
>> +	struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
>> +
>> +	return readl(priv->base + reg);
>> +}
>> +
>> +static u32 iomap_read_fifo(struct m_can_priv *m_can_class, int offset)
>> +{
>> +	struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
>> +
>> +	return readl(priv->mram_base + offset);
>> +}
>> +
>> +static int iomap_write_reg(struct m_can_priv *m_can_class, int reg, int val)
>> +{
>> +	struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
>> +
>> +	writel(val, priv->base + reg);
>> +
>> +	return 0;
>> +}
>> +
>> +static int iomap_write_fifo(struct m_can_priv *m_can_class, int offset, int val)
>> +{
>> +	struct m_can_plat_priv *priv = (struct m_can_plat_priv *)m_can_class->device_data;
>> +
>> +	writel(val, priv->mram_base + offset);
>> +
>> +	return 0;
>> +}
>> +
>> +static struct m_can_ops m_can_plat_ops = {
>> +	.read_reg = iomap_read_reg,
>> +	.write_reg = iomap_write_reg,
>> +	.write_fifo = iomap_write_fifo,
>> +	.read_fifo = iomap_read_fifo,
>> +};
>> +
>> +static int m_can_plat_probe(struct platform_device *pdev)
>> +{
>> +	struct m_can_priv *mcan_class;
>> +	struct m_can_plat_priv *priv;
>> +	struct resource *res;
>> +	void __iomem *addr;
>> +	void __iomem *mram_addr;
>> +	int irq, ret = 0;
>> +
>> +	mcan_class = m_can_class_allocate_dev(&pdev->dev);
>> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
>> +	if (!priv)
>> +		return -ENOMEM;
>> +
>> +	mcan_class->device_data = priv;
>> +
>> +	m_can_class_get_clocks(mcan_class);
>> +
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "m_can");
>> +	addr = devm_ioremap_resource(&pdev->dev, res);
>> +	irq = platform_get_irq_byname(pdev, "int0");
>> +	if (IS_ERR(addr) || irq < 0) {
>> +		ret = -EINVAL;
>> +		goto failed_ret;
>> +	}
>> +
>> +	/* message ram could be shared */
>> +	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
>> +	if (!res) {
>> +		ret = -ENODEV;
>> +		goto failed_ret;
>> +	}
>> +
>> +	mram_addr = devm_ioremap(&pdev->dev, res->start, resource_size(res));
>> +	if (!mram_addr) {
>> +		ret = -ENOMEM;
>> +		goto failed_ret;
>> +	}
>> +
>> +	priv->base = addr;
>> +	priv->mram_base = mram_addr;
>> +
>> +	mcan_class->net->irq = irq;
>> +	mcan_class->pm_clock_support = 1;
>> +	mcan_class->can.clock.freq = clk_get_rate(mcan_class->cclk);
>> +	mcan_class->dev = &pdev->dev;
>> +
>> +	mcan_class->ops = &m_can_plat_ops;
>> +
>> +	mcan_class->is_peripherial = false;
>> +
>> +	platform_set_drvdata(pdev, mcan_class->dev);
>> +
>> +	m_can_init_ram(mcan_class);
>> +
>> +	ret = m_can_class_register(mcan_class);
>> +
>> +failed_ret:
>> +	return ret;
>> +}
>> +
>> +static __maybe_unused int m_can_suspend(struct device *dev)
>> +{
>> +	return m_can_class_suspend(dev);
>> +}
>> +
>> +static __maybe_unused int m_can_resume(struct device *dev)
>> +{
>> +	return m_can_class_resume(dev);
>> +}
>> +
>> +static int m_can_plat_remove(struct platform_device *pdev)
>> +{
>> +	struct net_device *dev = platform_get_drvdata(pdev);
>> +	struct m_can_priv *mcan_class = netdev_priv(dev);
>> +
>> +	m_can_class_unregister(mcan_class);
>> +
>> +	platform_set_drvdata(pdev, NULL);
>> +
>> +	return 0;
>> +}
>> +
>> +static int __maybe_unused m_can_runtime_suspend(struct device *dev)
>> +{
>> +	struct net_device *ndev = dev_get_drvdata(dev);
>> +	struct m_can_priv *mcan_class = netdev_priv(ndev);
>> +
>> +	m_can_class_suspend(dev);
>> +
>> +	clk_disable_unprepare(mcan_class->cclk);
>> +	clk_disable_unprepare(mcan_class->hclk);
>> +
>> +	return 0;
>> +}
>> +
>> +static int __maybe_unused m_can_runtime_resume(struct device *dev)
>> +{
>> +	struct net_device *ndev = dev_get_drvdata(dev);
>> +	struct m_can_priv *mcan_class = netdev_priv(ndev);
>> +	int err;
>> +
>> +	err = clk_prepare_enable(mcan_class->hclk);
>> +	if (err)
>> +		return err;
>> +
>> +	err = clk_prepare_enable(mcan_class->cclk);
>> +	if (err)
>> +		clk_disable_unprepare(mcan_class->hclk);
>> +
>> +	m_can_class_resume(dev);
>> +
>> +	return err;
>> +}
>> +
>> +static const struct dev_pm_ops m_can_pmops = {
>> +	SET_RUNTIME_PM_OPS(m_can_runtime_suspend,
>> +			   m_can_runtime_resume, NULL)
>> +	SET_SYSTEM_SLEEP_PM_OPS(m_can_suspend, m_can_resume)
>> +};
>> +
>> +static const struct of_device_id m_can_of_table[] = {
>> +	{ .compatible = "bosch,m_can", .data = NULL },
>> +	{ /* sentinel */ },
>> +};
>> +MODULE_DEVICE_TABLE(of, m_can_of_table);
>> +
>> +static struct platform_driver m_can_plat_driver = {
>> +	.driver = {
>> +		.name = KBUILD_MODNAME,
>> +		.of_match_table = m_can_of_table,
>> +		.pm     = &m_can_pmops,
>> +	},
>> +	.probe = m_can_plat_probe,
>> +	.remove = m_can_plat_remove,
>> +};
>> +
>> +module_platform_driver(m_can_plat_driver);
>> +
>> +MODULE_AUTHOR("Dong Aisheng <b29396@...escale.com>");
>> +MODULE_AUTHOR("Dan Murphy <dmurphy@...com>");
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_DESCRIPTION("CAN bus driver for Bosch M_CAN controller");
> 
> Please fix the description.

ACK

> 
> Wolfgang
> 


-- 
------------------
Dan Murphy

Powered by blists - more mailing lists