lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Thu, 28 Feb 2019 17:51:10 +0530 From: Amit Kucheria <amit.kucheria@...aro.org> To: linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org, bjorn.andersson@...aro.org, edubezval@...il.com, andy.gross@...aro.org, Daniel Lezcano <daniel.lezcano@...aro.org>, David Brown <david.brown@...aro.org>, Zhang Rui <rui.zhang@...el.com> Cc: linux-pm@...r.kernel.org, devicetree@...r.kernel.org Subject: [PATCH v2 20/24] dt: thermal: tsens: Add bindings for qcs404 qcs404 uses v1 of the TSENS IP block. Create a fallback DT property "qcom,tsens-v1" to gather common code Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org> Reviewed-by: Rob Herring <robh@...nel.org> --- .../devicetree/bindings/thermal/qcom-tsens.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt index 1d9e8cf61018..673cc1831ee9 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.txt +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.txt @@ -6,11 +6,14 @@ Required properties: - "qcom,msm8916-tsens" (MSM8916) - "qcom,msm8974-tsens" (MSM8974) - "qcom,msm8996-tsens" (MSM8996) + - "qcom,qcs404-tsens", "qcom,tsens-v1" (QCS404) - "qcom,msm8998-tsens", "qcom,tsens-v2" (MSM8998) - "qcom,sdm845-tsens", "qcom,tsens-v2" (SDM845) The generic "qcom,tsens-v2" property must be used as a fallback for any SoC with version 2 of the TSENS IP. MSM8996 is the only exception because the generic property did not exist when support was added. + Similarly, the generic "qcom,tsens-v1" property must be used as a fallback for + any SoC with version 1 of the TSENS IP. - reg: Address range of the thermal registers. New platforms containing v2.x.y of the TSENS IP must specify the SROT and TM @@ -39,3 +42,14 @@ tsens0: thermal-sensor@...3000 { #qcom,sensors = <13>; #thermal-sensor-cells = <1>; }; + +Example 3 (for any platform containing v1 of the TSENS IP): +tsens: thermal-sensor@...000 { + compatible = "qcom,qcs404-tsens", "qcom,tsens-v1"; + reg = <0x004a9000 0x1000>, /* TM */ + <0x004a8000 0x1000>; /* SROT */ + nvmem-cells = <&tsens_caldata>; + nvmem-cell-names = "calib"; + #qcom,sensors = <10>; + #thermal-sensor-cells = <1>; + }; -- 2.17.1
Powered by blists - more mailing lists