| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 1 Mar 2019 11:21:40 +0100
From: Neil Armstrong <narmstrong@...libre.com>
To: jbrunet@...libre.com
Cc: Neil Armstrong <narmstrong@...libre.com>,
linux-clk@...r.kernel.org, linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] clk: meson: g12a: add cpu clocks
Add the Amlogic G12A Family CPU Clock tree in read/only for now.
The CPU clock can either use the SYS_PLL for > 1GHz frequencies or
use a couple of div+mux from 1GHz/667MHz/24MHz source with 2 non-glitch
muxes.
Proper DVFS support will come in a second time.
Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
---
drivers/clk/meson/g12a.c | 348 +++++++++++++++++++++++++++++++++++++++
drivers/clk/meson/g12a.h | 1 +
2 files changed, 349 insertions(+)
diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index 0e1ce8c03259..4c938f1b8421 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -150,6 +150,316 @@ static struct clk_regmap g12a_sys_pll = {
},
};
+static struct clk_regmap g12a_sys_pll_div16_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL1,
+ .bit_idx = 24,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "sys_pll_div16_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "sys_pll" },
+ .num_parents = 1,
+ /*
+ * This clock is used to debug the sys_pll range
+ * Linux should not change it at runtime
+ */
+ .flags = CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_fixed_factor g12a_sys_pll_div16 = {
+ .mult = 1,
+ .div = 16,
+ .hw.init = &(struct clk_init_data){
+ .name = "sys_pll_div16",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "sys_pll_div16_en" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_dyn0_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .mask = 0x3,
+ .shift = 0,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_dyn0_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal",
+ "fclk_div2",
+ "fclk_div3" },
+ .num_parents = 3,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_dyn0_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .shift = 4,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_dyn0_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk_dyn0_sel" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_dyn0 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .mask = 0x1,
+ .shift = 2,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_dyn0",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk_dyn0_sel",
+ "cpu_clk_dyn0_div" },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_dyn1_sel = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .mask = 0x3,
+ .shift = 16,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_dyn1_sel",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ IN_PREFIX "xtal",
+ "fclk_div2",
+ "fclk_div3" },
+ .num_parents = 3,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_dyn1_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .shift = 20,
+ .width = 6,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_dyn1_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk_dyn1_sel" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_dyn1 = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .mask = 0x1,
+ .shift = 18,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_dyn1",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk_dyn1_sel",
+ "cpu_clk_dyn1_div" },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_dyn = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .mask = 0x1,
+ .shift = 10,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_dyn",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk_dyn0",
+ "cpu_clk_dyn1" },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk = {
+ .data = &(struct clk_regmap_mux_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL0,
+ .mask = 0x1,
+ .shift = 11,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk",
+ .ops = &clk_regmap_mux_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk_dyn",
+ "sys_pll" },
+ .num_parents = 2,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_div16_en = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL1,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpu_clk_div16_en",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "cpu_clk" },
+ .num_parents = 1,
+ /*
+ * This clock is used to debug the cpu_clk range
+ * Linux should not change it at runtime
+ */
+ .flags = CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_fixed_factor g12a_cpu_clk_div16 = {
+ .mult = 1,
+ .div = 16,
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_div16",
+ .ops = &clk_fixed_factor_ops,
+ .parent_names = (const char *[]){ "cpu_clk_div16_en" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_apb_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL1,
+ .shift = 3,
+ .width = 3,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_apb_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_apb = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL1,
+ .bit_idx = 1,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpu_clk_apb",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "cpu_clk_apb_div" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ .flags = CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_atb_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL1,
+ .shift = 6,
+ .width = 3,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_atb_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_atb = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL1,
+ .bit_idx = 17,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpu_clk_atb",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "cpu_clk_atb_div" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ .flags = CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_axi_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL1,
+ .shift = 9,
+ .width = 3,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_axi_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_axi = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL1,
+ .bit_idx = 18,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpu_clk_axi",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "cpu_clk_axi_div" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ .flags = CLK_IGNORE_UNUSED,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_trace_div = {
+ .data = &(struct clk_regmap_div_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL1,
+ .shift = 20,
+ .width = 3,
+ .flags = CLK_DIVIDER_POWER_OF_TWO,
+ },
+ .hw.init = &(struct clk_init_data){
+ .name = "cpu_clk_trace_div",
+ .ops = &clk_regmap_divider_ro_ops,
+ .parent_names = (const char *[]){ "cpu_clk" },
+ .num_parents = 1,
+ },
+};
+
+static struct clk_regmap g12a_cpu_clk_trace = {
+ .data = &(struct clk_regmap_gate_data){
+ .offset = HHI_SYS_CPU_CLK_CNTL1,
+ .bit_idx = 23,
+ },
+ .hw.init = &(struct clk_init_data) {
+ .name = "cpu_clk_trace",
+ .ops = &clk_regmap_gate_ops,
+ .parent_names = (const char *[]){ "cpu_clk_trace_div" },
+ .num_parents = 1,
+ /*
+ * This clock is set by the ROM monitor code,
+ * Linux should not change it at runtime
+ */
+ .flags = CLK_IGNORE_UNUSED,
+ },
+};
+
static const struct pll_mult_range g12a_gp0_pll_mult_range = {
.min = 55,
.max = 255,
@@ -2167,6 +2477,26 @@ static struct clk_hw_onecell_data g12a_hw_onecell_data = {
[CLKID_MALI] = &g12a_mali.hw,
[CLKID_MPLL_5OM_DIV] = &g12a_mpll_50m_div.hw,
[CLKID_MPLL_5OM] = &g12a_mpll_50m.hw,
+ [CLKID_SYS_PLL_DIV16_EN] = &g12a_sys_pll_div16_en.hw,
+ [CLKID_SYS_PLL_DIV16] = &g12a_sys_pll_div16.hw,
+ [CLKID_CPU_CLK_DYN0_SEL] = &g12a_cpu_clk_dyn0_sel.hw,
+ [CLKID_CPU_CLK_DYN0_DIV] = &g12a_cpu_clk_dyn0_div.hw,
+ [CLKID_CPU_CLK_DYN0] = &g12a_cpu_clk_dyn0.hw,
+ [CLKID_CPU_CLK_DYN1_SEL] = &g12a_cpu_clk_dyn1_sel.hw,
+ [CLKID_CPU_CLK_DYN1_DIV] = &g12a_cpu_clk_dyn1_div.hw,
+ [CLKID_CPU_CLK_DYN1] = &g12a_cpu_clk_dyn1.hw,
+ [CLKID_CPU_CLK_DYN] = &g12a_cpu_clk_dyn.hw,
+ [CLKID_CPU_CLK] = &g12a_cpu_clk.hw,
+ [CLKID_CPU_CLK_DIV16_EN] = &g12a_cpu_clk_div16_en.hw,
+ [CLKID_CPU_CLK_DIV16] = &g12a_cpu_clk_div16.hw,
+ [CLKID_CPU_CLK_APB_DIV] = &g12a_cpu_clk_apb_div.hw,
+ [CLKID_CPU_CLK_APB] = &g12a_cpu_clk_apb.hw,
+ [CLKID_CPU_CLK_ATB_DIV] = &g12a_cpu_clk_atb_div.hw,
+ [CLKID_CPU_CLK_ATB] = &g12a_cpu_clk_atb.hw,
+ [CLKID_CPU_CLK_AXI_DIV] = &g12a_cpu_clk_axi_div.hw,
+ [CLKID_CPU_CLK_AXI] = &g12a_cpu_clk_axi.hw,
+ [CLKID_CPU_CLK_TRACE_DIV] = &g12a_cpu_clk_trace_div.hw,
+ [CLKID_CPU_CLK_TRACE] = &g12a_cpu_clk_trace.hw,
[NR_CLKS] = NULL,
},
.num = NR_CLKS,
@@ -2335,6 +2665,24 @@ static struct clk_regmap *const g12a_clk_regmaps[] = {
&g12a_mali_1,
&g12a_mali,
&g12a_mpll_50m,
+ &g12a_sys_pll_div16_en,
+ &g12a_cpu_clk_dyn0_sel,
+ &g12a_cpu_clk_dyn0_div,
+ &g12a_cpu_clk_dyn0,
+ &g12a_cpu_clk_dyn1_sel,
+ &g12a_cpu_clk_dyn1_div,
+ &g12a_cpu_clk_dyn1,
+ &g12a_cpu_clk_dyn,
+ &g12a_cpu_clk,
+ &g12a_cpu_clk_div16_en,
+ &g12a_cpu_clk_apb_div,
+ &g12a_cpu_clk_apb,
+ &g12a_cpu_clk_atb_div,
+ &g12a_cpu_clk_atb,
+ &g12a_cpu_clk_axi_div,
+ &g12a_cpu_clk_axi,
+ &g12a_cpu_clk_trace_div,
+ &g12a_cpu_clk_trace,
};
static const struct meson_eeclkc_data g12a_clkc_data = {
diff --git a/drivers/clk/meson/g12a.h b/drivers/clk/meson/g12a.h
index 4854750df902..0ba3bfe4d46d 100644
--- a/drivers/clk/meson/g12a.h
+++ b/drivers/clk/meson/g12a.h
@@ -50,6 +50,7 @@
#define HHI_GCLK_MPEG2 0x148
#define HHI_GCLK_OTHER 0x150
#define HHI_GCLK_OTHER2 0x154
+#define HHI_SYS_CPU_CLK_CNTL1 0x15c
#define HHI_VID_CLK_DIV 0x164
#define HHI_MPEG_CLK_CNTL 0x174
#define HHI_AUD_CLK_CNTL 0x178
--
2.20.1
Powered by blists - more mailing lists