lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1551437435-3462-2-git-send-email-harini.katakam@xilinx.com>
Date:   Fri, 1 Mar 2019 16:20:32 +0530
From:   Harini Katakam <harini.katakam@...inx.com>
To:     <nicolas.ferre@...rochip.com>, <davem@...emloft.net>,
        <claudiu.beznea@...rochip.com>, <andrew@...n.ch>
CC:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <michal.simek@...inx.com>, <harinikatakamlinux@...il.com>,
        <harini.katakam@...inx.com>
Subject: [PATCH v3 1/4] net: macb: Check MDIO state before read/write and use timeouts

Replace the while loop in MDIO read/write functions with a timeout.
In addition, add a check for MDIO bus busy before initiating a new
operation as well to make sure there is no ongoing MDIO operation.

Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@...inx.com>
Signed-off-by: Sai Pavan Boddu <sai.pavan.boddu@...inx.com>
Signed-off-by: Harini Katakam <harini.katakam@...inx.com>
Reviewed-by: Andrew Lunn <andrew@...n.ch>
---
v3 changes:
Used MACB_BIT for IDLE field

v2 changes:
Use readx_poll_timeout

Changes form RFC:
Cleaned up timeout implementation and moved it to a helper.

 drivers/net/ethernet/cadence/macb.h      |  2 ++
 drivers/net/ethernet/cadence/macb_main.c | 33 ++++++++++++++++++++++++++------
 2 files changed, 29 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 9bbaad9..f51040f 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -715,6 +715,8 @@
 		__v; \
 	})
 
+#define MACB_READ_NSR(bp)	macb_readl(bp, NSR)
+
 /* struct macb_dma_desc - Hardware DMA descriptor
  * @addr: DMA address of data buffer
  * @ctrl: Control and status bits
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index f2915f2..a19ed2b 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -36,6 +36,7 @@
 #include <linux/ip.h>
 #include <linux/udp.h>
 #include <linux/tcp.h>
+#include <linux/iopoll.h>
 #include "macb.h"
 
 #define MACB_RX_BUFFER_SIZE	128
@@ -79,6 +80,8 @@
  */
 #define MACB_HALT_TIMEOUT	1230
 
+#define MACB_MDIO_TIMEOUT	1000000 /* in usecs */
+
 /* DMA buffer descriptor might be different size
  * depends on hardware configuration:
  *
@@ -318,10 +321,23 @@ static void macb_get_hwaddr(struct macb *bp)
 	eth_hw_addr_random(bp->dev);
 }
 
+static int macb_mdio_wait_for_idle(struct macb *bp)
+{
+	u32 val;
+
+	return readx_poll_timeout(MACB_READ_NSR, bp, val, val & MACB_BIT(IDLE),
+				  1, MACB_MDIO_TIMEOUT);
+}
+
 static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 {
 	struct macb *bp = bus->priv;
 	int value;
+	int err;
+
+	err = macb_mdio_wait_for_idle(bp);
+	if (err < 0)
+		return err;
 
 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
 			      | MACB_BF(RW, MACB_MAN_READ)
@@ -329,9 +345,9 @@ static int macb_mdio_read(struct mii_bus *bus, int mii_id, int regnum)
 			      | MACB_BF(REGA, regnum)
 			      | MACB_BF(CODE, MACB_MAN_CODE)));
 
-	/* wait for end of transfer */
-	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
-		cpu_relax();
+	err = macb_mdio_wait_for_idle(bp);
+	if (err < 0)
+		return err;
 
 	value = MACB_BFEXT(DATA, macb_readl(bp, MAN));
 
@@ -342,6 +358,11 @@ static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 			   u16 value)
 {
 	struct macb *bp = bus->priv;
+	int err;
+
+	err = macb_mdio_wait_for_idle(bp);
+	if (err < 0)
+		return err;
 
 	macb_writel(bp, MAN, (MACB_BF(SOF, MACB_MAN_SOF)
 			      | MACB_BF(RW, MACB_MAN_WRITE)
@@ -350,9 +371,9 @@ static int macb_mdio_write(struct mii_bus *bus, int mii_id, int regnum,
 			      | MACB_BF(CODE, MACB_MAN_CODE)
 			      | MACB_BF(DATA, value)));
 
-	/* wait for end of transfer */
-	while (!MACB_BFEXT(IDLE, macb_readl(bp, NSR)))
-		cpu_relax();
+	err = macb_mdio_wait_for_idle(bp);
+	if (err < 0)
+		return err;
 
 	return 0;
 }
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ