| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190301024107.GN26041@dragon>
Date: Fri, 1 Mar 2019 10:41:08 +0800
From: Shawn Guo <shawnguo@...nel.org>
To: Alison Wang <alison.wang@....com>
Cc: leoyang.li@....com, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] arm64: dts: ls1028a: Add Audio DT nodes
On Wed, Feb 20, 2019 at 04:44:57PM +0800, Alison Wang wrote:
> This patch adds Audio DT nodes for LS1028ARDB and LS1028AQDS boards.
>
> Signed-off-by: Alison Wang <alison.wang@....com>
> ---
> Changes in v2:
> - Modify some nodes' names.
> - Use GIC_SPI and IRQ_TYPE_LEVEL_HIGH.
>
> arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts | 62 ++++++++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 63 +++++++++++++++++++++
> arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 57 +++++++++++++++++++
> 3 files changed, 182 insertions(+), 0 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index 14c79f4..b359068 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -32,6 +32,49 @@
> device_type = "memory";
> reg = <0x0 0x80000000 0x1 0x00000000>;
> };
> +
> + sys_mclk: clock-mclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + reg_1p8v: regulator-1p8v {
> + compatible = "regulator-fixed";
> + regulator-name = "1P8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,widgets =
> + "Microphone", "Microphone Jack",
> + "Headphone", "Headphone Jack",
> + "Speaker", "Speaker Ext",
> + "Line", "Line In Jack";
> + simple-audio-card,routing =
> + "MIC_IN", "Microphone Jack",
> + "Microphone Jack", "Mic Bias",
> + "LINE_IN", "Line In Jack",
> + "Headphone Jack", "HP_OUT",
> + "Speaker Ext", "LINE_OUT";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&sai1>;
> + frame-master;
> + bitclock-master;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&sgtl5000>;
> + frame-master;
> + bitclock-master;
> + system-clock-frequency = <25000000>;
> + };
> + };
> };
>
> &duart0 {
> @@ -89,5 +132,24 @@
> reg = <0x57>;
> };
> };
> +
> + i2c@5 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x5>;
> +
> + sgtl5000: audio-codec@a {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,sgtl5000";
> + reg = <0xa>;
> + VDDA-supply = <®_1p8v>;
> + VDDIO-supply = <®_1p8v>;
> + clocks = <&sys_mclk>;
> + };
> + };
> };
> };
> +
> +&sai1 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index fdeb417..50ca51a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -28,6 +28,49 @@
> device_type = "memory";
> reg = <0x0 0x80000000 0x1 0x0000000>;
> };
> +
> + sys_mclk: clock-mclk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <25000000>;
> + };
> +
> + reg_1p8v: regulator-1p8v {
> + compatible = "regulator-fixed";
> + regulator-name = "1P8V";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + sound {
> + compatible = "simple-audio-card";
> + simple-audio-card,format = "i2s";
> + simple-audio-card,widgets =
> + "Microphone", "Microphone Jack",
> + "Headphone", "Headphone Jack",
> + "Speaker", "Speaker Ext",
> + "Line", "Line In Jack";
> + simple-audio-card,routing =
> + "MIC_IN", "Microphone Jack",
> + "Microphone Jack", "Mic Bias",
> + "LINE_IN", "Line In Jack",
> + "Headphone Jack", "HP_OUT",
> + "Speaker Ext", "LINE_OUT";
> +
> + simple-audio-card,cpu {
> + sound-dai = <&sai4>;
> + frame-master;
> + bitclock-master;
> + };
> +
> + simple-audio-card,codec {
> + sound-dai = <&sgtl5000>;
> + frame-master;
> + bitclock-master;
> + system-clock-frequency = <25000000>;
> + };
> + };
> };
>
> &i2c0 {
> @@ -39,6 +82,22 @@
> #address-cells = <1>;
> #size-cells = <0>;
>
> + i2c@1 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x1>;
> +
> + sgtl5000: audio-codec@a {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,sgtl5000";
> + reg = <0xa>;
> + VDDA-supply = <®_1p8v>;
> + VDDIO-supply = <®_1p8v>;
> + clocks = <&sys_mclk>;
> + sclk-strength = <3>;
> + };
> + };
> +
> i2c@2 {
> #address-cells = <1>;
> #size-cells = <0>;
> @@ -71,3 +130,7 @@
> &duart1 {
> status = "okay";
> };
> +
> +&sai4 {
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index a8cf92a..de590ec 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -335,5 +335,62 @@
> <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
> <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
> };
> +
> + edma0: dma-controller@...0000 {
Please sort the node in unit-address.
Shawn
> + #dma-cells = <2>;
> + compatible = "fsl,vf610-edma";
> + reg = <0x0 0x22c0000 0x0 0x10000>,
> + <0x0 0x22d0000 0x0 0x10000>,
> + <0x0 0x22e0000 0x0 0x10000>;
> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "edma-tx", "edma-err";
> + dma-channels = <32>;
> + clock-names = "dmamux0", "dmamux1";
> + clocks = <&clockgen 4 1>,
> + <&clockgen 4 1>;
> + };
> +
> + sai1: audio-controller@...0000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf100000 0x0 0x10000>;
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 4>,
> + <&edma0 1 3>;
> + status = "disabled";
> + };
> +
> + sai2: audio-controller@...0000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf110000 0x0 0x10000>;
> + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 6>,
> + <&edma0 1 5>;
> + status = "disabled";
> + };
> +
> + sai4: audio-controller@...0000 {
> + #sound-dai-cells = <0>;
> + compatible = "fsl,vf610-sai";
> + reg = <0x0 0xf130000 0x0 0x10000>;
> + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> + <&clockgen 4 1>, <&clockgen 4 1>;
> + clock-names = "bus", "mclk1", "mclk2", "mclk3";
> + dma-names = "tx", "rx";
> + dmas = <&edma0 1 10>,
> + <&edma0 1 9>;
> + status = "disabled";
> + };
> };
> };
> --
> 1.7.1
>
Powered by blists - more mailing lists