[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <E9DB0B97-8B74-4397-87EF-ED05D991E1E9@theobroma-systems.com>
Date: Fri, 1 Mar 2019 19:19:59 +0100
From: Christoph Müllner
<christoph.muellner@...obroma-systems.com>
To: Heiko Stuebner <heiko@...ech.de>
Cc: robh+dt@...nel.org, mark.rutland@....com, shawn.lin@...k-chips.com,
ulf.hansson@...aro.org, adrian.hunter@...el.com,
Philipp Tomsich <philipp.tomsich@...obroma-systems.com>,
Michal Simek <michal.simek@...inx.com>,
Douglas Anderson <dianders@...omium.org>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
Viresh Kumar <viresh.kumar@...aro.org>,
Jeffy Chen <jeffy.chen@...k-chips.com>,
Shunqian Zheng <zhengsq@...k-chips.com>,
Ezequiel Garcia <ezequiel@...labora.com>,
Randy Li <ayaka@...lik.info>,
Tony Xie <tony.xie@...k-chips.com>,
Vicente Bergas <vicencb@...il.com>,
Klaus Goger <klaus.goger@...obroma-systems.com>,
linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org
Subject: Re: [PATCH 1/3] dt-bindings: mmc: Add DTS property to disable DCMDs
on Arasan controllers
> On 01.03.2019, at 19:17, Heiko Stuebner <heiko@...ech.de> wrote:
>
> Am Freitag, 1. März 2019, 17:43:45 CET schrieb Christoph Muellner:
>> Direct commands (DCMDs) are an optional feature of eMMC 5.1's command
>> queue engine (CQE). The Arasan eMMC 5.1 controller uses the CQHCI,
>> which exposes a control register bit to enable the feature.
>> The current implementation sets this bit unconditionally.
>>
>> This patch allows to surpress the feature activation,
>> by specifying the property disable-cqe-dcmd.
>>
>> Signed-off-by: Christoph Muellner <christoph.muellner@...obroma-systems.com>
>> Signed-off-by: Philipp Tomsich <philipp.tomsich@...obroma-systems.com>
>
> Patch subject is needs improvement :-) .
> I did scratch my head a lot regarding "where is the code change"
> until I actually looked into the patch itself, so you probably want
>
> mmc: sdhci-of-arasan: Add DTS property to disable DCMDs
>
> or similar instead of "dt-bindings: ..." here to match the subsystem.
Yes, I've spotted this as well after sending it.
I've already renamed to "mmc: sdhci-of-arasan: Add DTS property to disable DCMDs." for v2.
Thanks,
Christoph
>
>
> Heiko
>
>> ---
>> drivers/mmc/host/sdhci-of-arasan.c | 5 ++++-
>> 1 file changed, 4 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
>> index c9e3e050ccc8..88dc3f00a5be 100644
>> --- a/drivers/mmc/host/sdhci-of-arasan.c
>> +++ b/drivers/mmc/host/sdhci-of-arasan.c
>> @@ -832,7 +832,10 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
>> host->mmc_host_ops.start_signal_voltage_switch =
>> sdhci_arasan_voltage_switch;
>> sdhci_arasan->has_cqe = true;
>> - host->mmc->caps2 |= MMC_CAP2_CQE | MMC_CAP2_CQE_DCMD;
>> + host->mmc->caps2 |= MMC_CAP2_CQE;
>> +
>> + if (!of_property_read_bool(np, "disable-cqe-dcmd"))
>> + host->mmc->caps2 |= MMC_CAP2_CQE_DCMD;
>> }
>>
>> ret = sdhci_arasan_add_host(sdhci_arasan);
>>
>
>
>
>
Powered by blists - more mailing lists