lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Sun, 3 Mar 2019 23:05:27 +0530 From: Jagan Teki <jagan@...rulasolutions.com> To: Maxime Ripard <maxime.ripard@...tlin.com>, David Airlie <airlied@...ux.ie>, Daniel Vetter <daniel@...ll.ch>, Chen-Yu Tsai <wens@...e.org> Cc: dri-devel@...ts.freedesktop.org, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, linux-amarula@...rulasolutions.com, Michael Trimarchi <michael@...rulasolutions.com>, linux-sunxi@...glegroups.com, Jagan Teki <jagan@...rulasolutions.com> Subject: [PATCH v9 5/5] drm/sun4i: sun6i_mipi_dsi: Simplify dsi setup timings code DSI timings are varies between burst/non-burst devices and current driver is handling this support via if, else statements which would difficult to read. Simplify it by using goto to make code more readable. Signed-off-by: Jagan Teki <jagan@...rulasolutions.com> Tested-by: Merlijn Wajer <merlijn@...zup.org> --- Note: This change is created based on previous version burst changes [1] by addressing comment from [2] by Maxime to make code readable. [1] https://patchwork.kernel.org/cover/10813623/ [2] https://patchwork.kernel.org/patch/10666607/ drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 79 ++++++++++++++------------ 1 file changed, 42 insertions(+), 37 deletions(-) diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c index 31ec4048804d..898f32319c2d 100644 --- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c +++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c @@ -550,7 +550,8 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, { struct mipi_dsi_device *device = dsi->device; unsigned int Bpp = mipi_dsi_pixel_format_to_bpp(device->format) / 8; - u16 hbp = 0, hfp = 0, hsa = 0, hblk = 0, vblk = 0; + u16 hbp, hfp, hsa, hblk; + u16 vblk = 0; u32 basic_ctl = 0; size_t bytes; u8 *buffer; @@ -558,6 +559,7 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, /* Do all timing calculations up front to allocate buffer space */ if (device->mode_flags & MIPI_DSI_MODE_VIDEO_BURST) { + hbp = hfp = hsa = 0; hblk = mode->hdisplay * Bpp; basic_ctl = SUN6I_DSI_BASIC_CTL_VIDEO_BURST | SUN6I_DSI_BASIC_CTL_HSA_HSE_DIS | @@ -566,48 +568,51 @@ static void sun6i_dsi_setup_timings(struct sun6i_dsi *dsi, if (device->lanes == 4) basic_ctl |= SUN6I_DSI_BASIC_CTL_TRAIL_FILL | SUN6I_DSI_BASIC_CTL_TRAIL_INV(0xc); - } else { - /* - * A sync period is composed of a blanking packet (4 - * bytes + payload + 2 bytes) and a sync event packet - * (4 bytes). Its minimal size is therefore 10 bytes - */ + + goto alloc_buf; + } + + /* + * A sync period is composed of a blanking packet (4 + * bytes + payload + 2 bytes) and a sync event packet + * (4 bytes). Its minimal size is therefore 10 bytes + */ #define HSA_PACKET_OVERHEAD 10 - hsa = max((unsigned int)HSA_PACKET_OVERHEAD, - (mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD); - - /* - * The backporch is set using a blanking packet (4 - * bytes + payload + 2 bytes). Its minimal size is - * therefore 6 bytes - */ + hsa = max((unsigned int)HSA_PACKET_OVERHEAD, + (mode->hsync_end - mode->hsync_start) * Bpp - HSA_PACKET_OVERHEAD); + + /* + * The backporch is set using a blanking packet (4 + * bytes + payload + 2 bytes). Its minimal size is + * therefore 6 bytes + */ #define HBP_PACKET_OVERHEAD 6 - hbp = max((unsigned int)HBP_PACKET_OVERHEAD, - (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD); - - /* - * The frontporch is set using a blanking packet (4 - * bytes + payload + 2 bytes). Its minimal size is - * therefore 6 bytes - */ + hbp = max((unsigned int)HBP_PACKET_OVERHEAD, + (mode->htotal - mode->hsync_end) * Bpp - HBP_PACKET_OVERHEAD); + + /* + * The frontporch is set using a blanking packet (4 + * bytes + payload + 2 bytes). Its minimal size is + * therefore 6 bytes + */ #define HFP_PACKET_OVERHEAD 6 - hfp = max((unsigned int)HFP_PACKET_OVERHEAD, - (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD); - - /* - * The blanking is set using a sync event (4 bytes) - * and a blanking packet (4 bytes + payload + 2 - * bytes). Its minimal size is therefore 10 bytes. - */ + hfp = max((unsigned int)HFP_PACKET_OVERHEAD, + (mode->hsync_start - mode->hdisplay) * Bpp - HFP_PACKET_OVERHEAD); + + /* + * The blanking is set using a sync event (4 bytes) + * and a blanking packet (4 bytes + payload + 2 + * bytes). Its minimal size is therefore 10 bytes. + */ #define HBLK_PACKET_OVERHEAD 10 - hblk = max((unsigned int)HBLK_PACKET_OVERHEAD, - (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp - - HBLK_PACKET_OVERHEAD); + hblk = max((unsigned int)HBLK_PACKET_OVERHEAD, + (mode->htotal - (mode->hsync_end - mode->hsync_start)) * Bpp - + HBLK_PACKET_OVERHEAD); - if (device->lanes == 4) - vblk = sun6i_dsi_get_timings_vblk(dsi, mode, hblk); - } + if (device->lanes == 4) + vblk = sun6i_dsi_get_timings_vblk(dsi, mode, hblk); +alloc_buf: /* How many bytes do we need to send all payloads? */ bytes = max_t(size_t, max(max(hfp, hblk), max(hsa, hbp)), vblk); buffer = kmalloc(bytes, GFP_KERNEL); -- 2.18.0.321.gffc6fa0e3
Powered by blists - more mailing lists