[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190304130222.18534-1-ulf.hansson@linaro.org>
Date: Mon, 4 Mar 2019 14:02:22 +0100
From: Ulf Hansson <ulf.hansson@...aro.org>
To: Linus <torvalds@...ux-foundation.org>, linux-mmc@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Ulf Hansson <ulf.hansson@...aro.org>
Subject: [GIT PULL] MMC updates for v5.1
Hi Linus,
Here's the PR with MMC updates for v5.1. Details about the highlights are as
usual found in the signed tag.
Please pull this in!
Kind regards
Ulf Hansson
The following changes since commit e30be063d6dbcc0f18b1eb25fa709fdef89201fb:
mmc: sdhci-esdhc-imx: correct the fix of ERR004536 (2019-02-28 12:18:31 +0100)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git tags/mmc-v5.1
for you to fetch changes up to d4721339dcca7def04909a8e60da43c19a24d8bf:
mmc:fix a bug when max_discard is 0 (2019-03-01 09:50:10 +0100)
----------------------------------------------------------------
MMC core:
- mmc: core: Fixup max_discard/trim calculations
- mmc: core: Announce SD specs greater than 4.0
- mmc: core: Add discard support for SD cards
- mmc: core: Don't do retries for CMD6 (SWITCH command)
- mmc: core: Various cleanups and re-structuring
MMC host:
- cqhci: Add maintainers for eMMC CQHCI driver
- sdhci: Consolidate WP GPIO code
- sdhci: Add ADMA3 DMA support for V4 enabled host
- sdhci-pci-o2micro: Fixup card detect support
- sdhci-tegra: Add support for CMDQ
- sdhci-tegra: Support SDMMC pads auto-calibration
- sdhci-esdhc-imx: Add DCMD support and CMDQ support
- sdhci-esdhc-imx: Add support for i.MX6ULL variant
- sdhci-esdhc-imx: Fixup HS400 timing issue
- sdhci-esdhc-imx: Add HS400_ES support for i.MX8QXP
- renesas_sdhi: Avoid CRC errors by adjusting settings to speed mode
- renesas_sdhi: Fixup card initialization for high speed mode
- omap: Fixup timeout settings
- atmel-mci: Enable 8 bits bus-width support
- jz4740: Convert some legacy code to use modern APIs
- mmci: Send a CMD12 to clear DPSM at errors for STM32 sdmmc
----------------------------------------------------------------
Aaro Koskinen (1):
mmc: omap: fix the maximum timeout setting
Andrey Smirnov (1):
mmc: sdhci-esdhc-imx: Constify driver data
Avri Altman (4):
mmc: core: Calculate the discard arg only once
mmc: core: Indicate SD specs higher than 4.0
mmc: core: Add discard support to sd
mmc: core: Add sd discard timeout
BOUGH CHEN (13):
mmc: sdhci-esdhc-imx: clear ESDHC_STD_TUNING_EN for manual tuning method
mmc: sdhci: usdhc: do not do tuning for DDR50 mode.
mmc: sdhci-esdhc-imx: fix HS400 timing issue
dt-bindings: mmc: fsl-imx-esdhc: add imx6ull compatible string
mmc: sdhci-esdhc-imx: add SD clock limitation for imx6ull
mmc: sdhci-esdhc-imx: add delay between tuning cycles
mmc: sdhci: add delay after the last tuning command
mmc: sdhci-esdhc-imx: remove the 100MHz limitation for Strobe DLL
mmc: sdhci-esdhc-imx: add HS400_ES support for i.MX8QXP
mmc: sdhci: correct the maximum timeout when enable CMDQ
mmc: sdhci-esdhc-imx: add CMDQ support
mmc: sdhci-esdhc-imx: add DCMD support for CMDQ
mmc: sdhci-esdhc-imx: clear the HALT bit when enable CQE
Chaotian Jing (1):
mmc: core: do not retry CMD6 in __mmc_switch()
Colin Ian King (1):
mmc: cb710: fix indentation issue in if block
Ernest Zhang(WH) (3):
mmc: sdhci: Moving sdhci_o2 into sdhci-pci-o2micro.c
mmc: sdhci: Fix O2 Host PLL and card detect issue
mmc: sdhci: Remove unneeded quirk2 flag of O2 SD host controller
Gustavo A. R. Silva (1):
mmc: sdhci-xenon: Fixup already marked switch fall-through
Jiong Wu (1):
mmc:fix a bug when max_discard is 0
Linus Walleij (7):
mmc: slot-gpio: Remove override_active_level on WP
mmc: mxcmmc: Drop unused includes
mmc: mxs-mmc: Drop unused includes
mmc: sdhci-bcm-kona: Drop unused includes
mmc: sdhci-pxav2: Drop unused include
mmc: sunxi-mmc: Drop unused includes
mmc: wmt-sdmmc: Drop unused include
Lukas Wunner (3):
mmc: bcm2835: Drop DMA channel error pointer check
mmc: bcm2835: Drop pointer to mmc_host from bcm2835_host
mmc: bcm2835: Deduplicate reset of driver data on remove
Mathieu Malaterre (2):
mmc: core: annotate implicit fall through
mmc: jz4740: Annotate implicit fall through
Mike Maslenkin (1):
mmc: dt-bindings: omap: Remove duplicate documentation paragraphs
Nicolas Ferre (1):
mmc: atmel-mci: enable 8 bits buswidth support
Niklas Söderlund (2):
mmc: tmio: fix typo in tmio_mmc_init_ocr()
mmc: tmio: undo PM autosuspend when removing the host
Paul Cercueil (1):
mmc: jz4740: Remove platform data and use standard APIs
Sowjanya Komatineni (5):
dt-bindings: mmc: tegra: Add pinctrl for SDMMC drive strengths
mmc: tegra: SDMMC pads auto-calibration
dt-bindings: mmc: Add supports-cqe property
mmc: sdhci: Add ADMA3 DMA support for V4 enabled host
mmc: tegra: HW Command Queue Support for Tegra SDMMC
Stefan Wahren (1):
mmc: sdhci-brcmstb: handle mmc_of_parse() errors during probe
Takeshi Saito (2):
mmc: renesas_sdhi: Fix card initialization failure in high speed mode
mmc: renesas_sdhi: Change HW adjustment register according to speed mode
Thomas Petazzoni (3):
mmc: sdhci: use WP GPIO in sdhci_check_ro()
mmc: sdhci-omap: drop ->get_ro() implementation
mmc: sdhci-tegra: drop ->get_ro() implementation
Ulf Hansson (12):
MAINTAINERS: Add maintainers for eMMC CQHCI driver
MAINTAINERS: Drop link to git for SDHCI
mmc: mmci: Send a CMD12 to clear the DPSM at errors
mmc: core: Convert mmc_wait_for_app_cmd() to static
mmc: core: Drop retries as in-parameter to mmc_wait_for_app_cmd()
mmc: of_mmc_spi: Convert to mmc_of_parse_voltage()
mmc: core: Move regulator helpers to separate file
mmc: core: Convert mmc_regulator_get_ocrmask() to static
mmc: core: Move mmc_of_parse_voltage() to host.c
mmc: core: Convert mmc_align_data_size() into an SDIO specific function
Merge branch 'fixes' into next
Merge branch 'fixes' into next
Wei Yongjun (2):
mmc: sdhci_am654: Make symbol 'sdhci_am654_ops' static
mmc: sdhci-esdhc-imx: fix return value check in sdhci_esdhc_imx_probe()
YueHaibing (1):
mmc: block: fix debugfs_simple_attr.cocci warnings
hongjiefang (1):
mmc: core: Add a debug print when the card may have been replaced
wangbo (1):
mmc:sdio: Remove unneeded variable ret
.../devicetree/bindings/mmc/fsl-imx-esdhc.txt | 1 +
Documentation/devicetree/bindings/mmc/mmc.txt | 2 +
.../bindings/mmc/nvidia,tegra20-sdhci.txt | 6 +-
Documentation/devicetree/bindings/mmc/ti-omap.txt | 28 --
MAINTAINERS | 9 +-
drivers/mmc/core/Makefile | 2 +-
drivers/mmc/core/block.c | 21 +-
drivers/mmc/core/core.c | 336 +--------------------
drivers/mmc/core/core.h | 1 +
drivers/mmc/core/host.c | 48 ++-
drivers/mmc/core/mmc.c | 10 +
drivers/mmc/core/mmc_ops.c | 2 +-
drivers/mmc/core/regulator.c | 260 ++++++++++++++++
drivers/mmc/core/sd.c | 20 +-
drivers/mmc/core/sd_ops.c | 33 +-
drivers/mmc/core/sd_ops.h | 3 -
drivers/mmc/core/sdio.c | 9 +-
drivers/mmc/core/sdio_bus.c | 3 +-
drivers/mmc/core/sdio_io.c | 29 +-
drivers/mmc/core/sdio_ops.h | 1 -
drivers/mmc/core/slot-gpio.c | 9 +-
drivers/mmc/host/Kconfig | 2 +
drivers/mmc/host/atmel-mci.c | 8 +-
drivers/mmc/host/bcm2835.c | 23 +-
drivers/mmc/host/cb710-mmc.c | 42 +--
drivers/mmc/host/davinci_mmc.c | 2 +-
drivers/mmc/host/jz4740_mmc.c | 73 +----
drivers/mmc/host/mmc_spi.c | 2 +-
drivers/mmc/host/mmci.c | 27 +-
drivers/mmc/host/mmci.h | 1 +
drivers/mmc/host/mxcmmc.c | 2 -
drivers/mmc/host/mxs-mmc.c | 2 -
drivers/mmc/host/of_mmc_spi.c | 22 +-
drivers/mmc/host/omap.c | 2 +-
drivers/mmc/host/pxamci.c | 2 +-
drivers/mmc/host/renesas_sdhi.h | 2 +
drivers/mmc/host/renesas_sdhi_core.c | 19 +-
drivers/mmc/host/renesas_sdhi_internal_dmac.c | 1 +
drivers/mmc/host/s3cmci.c | 2 +-
drivers/mmc/host/sdhci-bcm-kona.c | 2 -
drivers/mmc/host/sdhci-brcmstb.c | 4 +-
drivers/mmc/host/sdhci-esdhc-imx.c | 301 +++++++++++++++---
drivers/mmc/host/sdhci-omap.c | 1 -
drivers/mmc/host/sdhci-pci-core.c | 10 -
drivers/mmc/host/sdhci-pci-o2micro.c | 140 ++++++++-
drivers/mmc/host/sdhci-pci.h | 6 +-
drivers/mmc/host/sdhci-pxav2.c | 1 -
drivers/mmc/host/sdhci-tegra.c | 286 ++++++++++++++----
drivers/mmc/host/sdhci-xenon-phy.c | 2 +-
drivers/mmc/host/sdhci.c | 27 +-
drivers/mmc/host/sdhci.h | 6 +
drivers/mmc/host/sdhci_am654.c | 2 +-
drivers/mmc/host/sunxi-mmc.c | 2 -
drivers/mmc/host/tmio_mmc_core.c | 3 +-
drivers/mmc/host/wmt-sdmmc.c | 1 -
include/linux/mmc/card.h | 3 +
include/linux/mmc/host.h | 12 +-
include/linux/mmc/sd.h | 6 +
include/linux/mmc/slot-gpio.h | 2 +-
59 files changed, 1198 insertions(+), 686 deletions(-)
create mode 100644 drivers/mmc/core/regulator.c
Powered by blists - more mailing lists