| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1551802205-32188-4-git-send-email-ludovic.Barre@st.com>
Date: Tue, 5 Mar 2019 17:10:04 +0100
From: Ludovic Barre <ludovic.Barre@...com>
To: Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>
CC: <srinivas.kandagatla@...aro.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-mmc@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Ludovic Barre <ludovic.barre@...com>
Subject: [PATCH 3/4] mmc: mmci: add hardware busy timeout feature
From: Ludovic Barre <ludovic.barre@...com>
In some variants, the data timer is enabled when the DPSM is in
busy state (while data transfert or MMC_RSP_BUSY), and could
generate a data timeout error if the counter reach 0.
-Define max_busy_timeout (in ms) according to clock.
-Set data timer register if the command has rsp_busy flag.
If busy_timeout is not defined by framework, the busy
length after Data Burst is defined as 1 second
(refer: 4.6.2.2 Write of sd specification part1 v6-0).
-Add MCI_DATATIMEOUT error management in mmci_cmd_irq.
Signed-off-by: Ludovic Barre <ludovic.barre@...com>
---
drivers/mmc/host/mmci.c | 43 ++++++++++++++++++++++++++++++++++++-------
drivers/mmc/host/mmci.h | 2 ++
2 files changed, 38 insertions(+), 7 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 3fa4386..d1b7563 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -1093,6 +1093,7 @@ static void
mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
{
void __iomem *base = host->base;
+ unsigned long long clks = 0;
dev_dbg(mmc_dev(host->mmc), "op %02x arg %08x flags %08x\n",
cmd->opcode, cmd->arg, cmd->flags);
@@ -1115,6 +1116,19 @@ mmci_start_command(struct mmci_host *host, struct mmc_command *cmd, u32 c)
else
c |= host->variant->cmdreg_srsp;
}
+
+ if (host->variant->busy_timeout && !cmd->data) {
+ if (cmd->flags & MMC_RSP_BUSY) {
+ if (!cmd->busy_timeout)
+ cmd->busy_timeout = 1000;
+
+ clks = (unsigned long long)cmd->busy_timeout;
+ clks *= host->cclk;
+ do_div(clks, MSEC_PER_SEC);
+ }
+ writel_relaxed(clks, host->base + MMCIDATATIMER);
+ }
+
if (/*interrupt*/0)
c |= MCI_CPSM_INTERRUPT;
@@ -1221,6 +1235,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
{
void __iomem *base = host->base;
bool sbc, busy_resp;
+ u32 err_msk;
if (!cmd)
return;
@@ -1233,8 +1248,12 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
* handling. Note that we tag on any latent IRQs postponed
* due to waiting for busy status.
*/
- if (!((status|host->busy_status) &
- (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT|MCI_CMDSENT|MCI_CMDRESPEND)))
+ err_msk = MCI_CMDCRCFAIL | MCI_CMDTIMEOUT;
+ if (host->variant->busy_timeout && busy_resp)
+ err_msk |= MCI_DATATIMEOUT;
+
+ if (!((status | host->busy_status) &
+ (err_msk | MCI_CMDSENT | MCI_CMDRESPEND)))
return;
/*
@@ -1243,7 +1262,7 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
if (busy_resp && host->variant->busy_detect) {
/* We are busy with a command, return */
- if (host->busy_status &&
+ if (host->busy_status && !(status & (err_msk)) &&
(status & host->variant->busy_detect_flag))
return;
@@ -1253,9 +1272,9 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
* that the special busy status bit is still set before
* proceeding.
*/
- if (!host->busy_status &&
- !(status & (MCI_CMDCRCFAIL|MCI_CMDTIMEOUT)) &&
- (readl(base + MMCISTATUS) & host->variant->busy_detect_flag)) {
+ if (!host->busy_status && !(status & (err_msk)) &&
+ (readl(base + MMCISTATUS) &
+ host->variant->busy_detect_flag)) {
/* Clear the busy start IRQ */
writel(host->variant->busy_detect_mask,
@@ -1297,6 +1316,9 @@ mmci_cmd_irq(struct mmci_host *host, struct mmc_command *cmd,
cmd->error = -ETIMEDOUT;
} else if (status & MCI_CMDCRCFAIL && cmd->flags & MMC_RSP_CRC) {
cmd->error = -EILSEQ;
+ } else if (host->variant->busy_timeout && busy_resp &&
+ status & MCI_DATATIMEOUT) {
+ cmd->error = -ETIMEDOUT;
} else {
cmd->resp[0] = readl(base + MMCIRESPONSE0);
cmd->resp[1] = readl(base + MMCIRESPONSE1);
@@ -1564,6 +1586,7 @@ static irqreturn_t mmci_irq(int irq, void *dev_id)
status &= ~host->variant->busy_detect_flag;
ret = 1;
+
} while (status);
spin_unlock(&host->lock);
@@ -1968,6 +1991,8 @@ static int mmci_probe(struct amba_device *dev,
* Enable busy detection.
*/
if (variant->busy_detect) {
+ u32 max_busy_timeout = 0;
+
mmci_ops.card_busy = mmci_card_busy;
/*
* Not all variants have a flag to enable busy detection
@@ -1977,7 +2002,11 @@ static int mmci_probe(struct amba_device *dev,
mmci_write_datactrlreg(host,
host->variant->busy_dpsm_flag);
mmc->caps |= MMC_CAP_WAIT_WHILE_BUSY;
- mmc->max_busy_timeout = 0;
+
+ if (variant->busy_timeout)
+ max_busy_timeout = ~0UL / (mmc->f_max / MSEC_PER_SEC);
+
+ mmc->max_busy_timeout = max_busy_timeout;
}
/* Prepare a CMD12 - needed to clear the DPSM on some variants. */
diff --git a/drivers/mmc/host/mmci.h b/drivers/mmc/host/mmci.h
index 14df810..7d9eb92 100644
--- a/drivers/mmc/host/mmci.h
+++ b/drivers/mmc/host/mmci.h
@@ -289,6 +289,7 @@ struct mmci_host;
* @signal_direction: input/out direction of bus signals can be indicated
* @pwrreg_clkgate: MMCIPOWER register must be used to gate the clock
* @busy_detect: true if the variant supports busy detection on DAT0.
+ * @busy_timeout: true if the variant supports hardware busy timeout on R1B.
* @busy_dpsm_flag: bitmask enabling busy detection in the DPSM
* @busy_detect_flag: bitmask identifying the bit in the MMCISTATUS register
* indicating that the card is busy
@@ -338,6 +339,7 @@ struct variant_data {
u8 signal_direction:1;
u8 pwrreg_clkgate:1;
u8 busy_detect:1;
+ u8 busy_timeout:1;
u32 busy_dpsm_flag;
u32 busy_detect_flag;
u32 busy_detect_mask;
--
2.7.4
Powered by blists - more mailing lists