| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190305225407.GA16211@kunai>
Date: Tue, 5 Mar 2019 23:54:11 +0100
From: Wolfram Sang <wsa@...-dreams.de>
To: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: linux-i2c@...r.kernel.org, linux-kernel@...r.kernel.org,
Peter Rosin <peda@...ntia.se>,
Bartosz Golaszewski <brgl@...ev.pl>
Subject: [PULL REQUEST] i2c for 5.1
Linus,
The I2C pull request contains this time:
* the I2C core gained helpers to assist drivers in handling their
suspended state, and drivers were converted to use it
* two new fault-injectors for stress-testing
* bigger refactoring and feature improvements for the ocores, sh_mobile,
and tegra drivers
* platform_data removal for the at24 EEPROM driver
* and various improvements and bugfixes all over the subsystem
Please pull.
Thanks,
Wolfram
The following changes since commit d13937116f1e82bf508a6325111b322c30c85eb9:
Linux 5.0-rc6 (2019-02-10 14:42:20 -0800)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-5.1
for you to fetch changes up to 93b6604c5a669d84e45fe5129294875bf82eb1ff:
i2c: Allow recovery of the initial IRQ by an I2C client device. (2019-02-24 14:43:22 +0100)
----------------------------------------------------------------
Andrew Lunn (2):
i2c: ocores: Add support for IO mapper registers.
i2c: ocores: Add support for bus clock via platform data
Andy Shevchenko (1):
i2c: acpi: Move I2C bits from acpi.h to i2c.h
Bartosz Golaszewski (15):
ARM: davinci: da850-evm: remove dead MTD code
ARM: davinci: mityomapl138: don't read the MAC address from machine code
ARM: davinci: dm365-evm: use device properties for at24 eeprom
ARM: davinci: da830-evm: use device properties for at24 eeprom
ARM: davinci: dm644x-evm: use device properties for at24 eeprom
ARM: davinci: dm646x-evm: use device properties for at24 eeprom
ARM: davinci: sffsdr: fix the at24 eeprom device name
ARM: davinci: sffsdr: use device properties for at24 eeprom
ARM: davinci: remove dead code related to MAC address reading
ARM: davinci: mityomapl138: use nvmem notifiers
ARM: davinci: mityomapl138: use device properties for at24 eeprom
Merge branch 'v5.1/eeprom-for-bartosz' of git://git.kernel.org/.../nsekhar/linux-davinci into at24/for-next
eeprom: at24: remove at24_platform_data
dt-bindings: at24: add the 'num-addresses' property
eeprom: at24: implement support for 'num-addresses' property
Chengguang Xu (1):
i2c: expand minor range when registering chrdev region
Colin Ian King (1):
i2c: tegra: change phrasing, "fallbacking" to "falling back"
Federico Vaga (5):
i2c: ocores: stop transfer on timeout
i2c: ocores: do not handle IRQ if IF is not set
i2c: ocores: add polling interface
i2c: ocores: add SPDX tag
i2c: ocores: checkpatch fixes
Geert Uytterhoeven (1):
i2c: rcar: Fix clients using i2c from suspend callback
Hans de Goede (1):
i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
Jae Hyun Yoo (2):
i2c: aspeed: Remove hard-coded bus timeout value setting
i2c: aspeed: Add multi-master use case support
Jim Broadus (1):
i2c: Allow recovery of the initial IRQ by an I2C client device.
John Sperbeck (1):
i2c: core-smbus: don't trace smbus_reply data on errors
Jonathan Hunter (1):
i2c: tegra: Only display error messages if DMA setup fails
Linus Walleij (3):
i2c: Add DT bindings for Xscale I2C masters
i2c: iop3xx: Add device tree probing
i2c: cbus-gpio: Switch to use GPIO descriptors
Oleksij Rempel (2):
i2c: imx: notify about real errors on dma i2c_imx_dma_request
i2c: imx: improve the error handling in i2c_imx_dma_request()
Sowjanya Komatineni (9):
i2c: tegra: sort all the include headers alphabetically
i2c: tegra: add bus clear Master Support
i2c: tegra: fix maximum transfer size
i2c: tegra: update maximum transfer size
i2c: tegra: Add DMA support
i2c: tegra: update transfer timeout
i2c: tegra: add i2c interface timing support
i2c: tegra: remove master fifo support on tegra186
i2c: tegra: remove multi-master support
Thierry Reding (1):
i2c: of: Try to find an I2C adapter matching the parent
Wolfram Sang (32):
i2c: add suspended flag and accessors for i2c adapters
i2c: synquacer: remove unused is_suspended flag
i2c: brcmstb: use core helper to mark adapter suspended
i2c: zx2967: use core helper to mark adapter suspended
i2c: sprd: don't use pdev as variable name for struct device *
i2c: sprd: use core helper to mark adapter suspended
i2c: exynos5: use core helper to mark adapter suspended
i2c: s3c2410: use core helper to mark adapter suspended
i2c: rcar: add suspend/resume support
i2c: sh_mobile: simplify sending address for RX
i2c: sh_mobile: remove get_data function
i2c: sh_mobile: drop 'data' argument from i2c_op function
i2c: sh_mobile: remove is_first_byte function
i2c: sh_mobile: replace break; with if-block
i2c: sh_mobile: refactor rx isr
i2c: sh_mobile: update copyright and comments
i2c: algo-bit: include main i2c header
i2c: algo-bit: convert to SPDX header
i2c: gpio: sort includes
i2c: gpio: fault-injector: sort debugfs files alphabetically
i2c: gpio: fault-injector: better SPHINX style in docs
i2c: rcar: comment maintenance
i2c: sh_mobile: sort compatible entries
i2c: sh_mobile: use new clock calculation formulas for Gen3
i2c: sh_mobile: use new clock calculation formulas for Gen2
i2c: gpio: merge two very similar comments
i2c: rcar: refactor TCYC handling
Merge branch 'i2c/for-current' into i2c/for-5.1
Merge tag 'at24-5.1-updates-for-wolfram' of git://git.kernel.org/.../brgl/linux into i2c/for-5.1
i2c: gpio: fault-injector: add 'lose_arbitration' injector
i2c: gpio: fault-injector: add 'inject_panic' injector
i2c: ocores: turn incomplete kdoc into a comment
YueHaibing (1):
i2c: imx: Fix inconsistent IS_ERR and PTR_ERR in i2c_imx_dma_request()
qii wang (3):
dt-bindings: i2c: Add Mediatek MT7629 i2c binding
i2c: mediatek: speeds is replaced by macros definitions
i2c: mediatek: remove completion_done()
with much appreciated quality assurance from
----------------------------------------------------------------
Aaro Koskinen (1):
(Test) i2c: cbus-gpio: Switch to use GPIO descriptors
Andrew Lunn (6):
(Rev.) i2c: ocores: turn incomplete kdoc into a comment
(Rev.) i2c: ocores: checkpatch fixes
(Rev.) i2c: ocores: add SPDX tag
(Test) i2c: ocores: add polling interface
(Rev.) i2c: ocores: do not handle IRQ if IF is not set
(Rev.) i2c: ocores: stop transfer on timeout
Andy Shevchenko (6):
(Rev.) i2c: designware: Do not allow i2c_dw_xfer() calls while suspended
(Rev.) ARM: davinci: sffsdr: use device properties for at24 eeprom
(Rev.) ARM: davinci: dm646x-evm: use device properties for at24 eeprom
(Rev.) ARM: davinci: dm644x-evm: use device properties for at24 eeprom
(Rev.) ARM: davinci: da830-evm: use device properties for at24 eeprom
(Rev.) ARM: davinci: dm365-evm: use device properties for at24 eeprom
Baolin Wang (2):
(Rev.) i2c: sprd: use core helper to mark adapter suspended
(Rev.) i2c: sprd: don't use pdev as variable name for struct device *
Benjamin Tissoires (1):
(Rev.) i2c: Allow recovery of the initial IRQ by an I2C client device.
Brendan Higgins (2):
(Rev.) i2c: aspeed: Add multi-master use case support
(Rev.) i2c: aspeed: Remove hard-coded bus timeout value setting
Charles Keepax (1):
(Rev.) i2c: Allow recovery of the initial IRQ by an I2C client device.
Dmitry Osipenko (10):
(Rev.) i2c: tegra: Only display error messages if DMA setup fails
(Rev.) i2c: tegra: add i2c interface timing support
(Test) i2c: tegra: add i2c interface timing support
(Rev.) i2c: tegra: update transfer timeout
(Rev.) i2c: tegra: Add DMA support
(Test) i2c: tegra: Add DMA support
(Rev.) i2c: tegra: update maximum transfer size
(Rev.) i2c: tegra: fix maximum transfer size
(Rev.) i2c: tegra: add bus clear Master Support
(Rev.) i2c: tegra: sort all the include headers alphabetically
Geert Uytterhoeven (10):
(Rev.) i2c: gpio: merge two very similar comments
(Rev.) i2c: sh_mobile: use new clock calculation formulas for Gen2
(Rev.) i2c: sh_mobile: use new clock calculation formulas for Gen3
(Rev.) i2c: sh_mobile: sort compatible entries
(Rev.) i2c: sh_mobile: refactor rx isr
(Rev.) i2c: sh_mobile: replace break; with if-block
(Rev.) i2c: sh_mobile: remove is_first_byte function
(Rev.) i2c: sh_mobile: drop 'data' argument from i2c_op function
(Rev.) i2c: sh_mobile: remove get_data function
(Rev.) i2c: sh_mobile: simplify sending address for RX
Joel Stanley (1):
(Rev.) i2c: aspeed: Remove hard-coded bus timeout value setting
Kamal Dasu (1):
(Rev.) i2c: brcmstb: use core helper to mark adapter suspended
Marek Szyprowski (2):
(Test) i2c: s3c2410: use core helper to mark adapter suspended
(Test) i2c: exynos5: use core helper to mark adapter suspended
Nicolas Boichat (1):
(Rev.) i2c: mediatek: speeds is replaced by macros definitions
Oleksij Rempel (1):
(Rev.) i2c: imx: Fix inconsistent IS_ERR and PTR_ERR in i2c_imx_dma_request()
Rob Herring (1):
(Rev.) dt-bindings: i2c: Add Mediatek MT7629 i2c binding
Simon Horman (7):
(Rev.) i2c: rcar: refactor TCYC handling
(Rev.) i2c: sh_mobile: use new clock calculation formulas for Gen3
(Rev.) i2c: sh_mobile: sort compatible entries
(Rev.) i2c: rcar: comment maintenance
(Rev.) i2c: gpio: sort includes
(Rev.) i2c: algo-bit: convert to SPDX header
(Rev.) i2c: algo-bit: include main i2c header
Steven Rostedt (VMware) (1):
(Rev.) i2c: core-smbus: don't trace smbus_reply data on errors
Tristan Bastian (1):
(Test) i2c: of: Try to find an I2C adapter matching the parent
Uwe Kleine-K??nig (1):
(Rev.) i2c: imx: Fix inconsistent IS_ERR and PTR_ERR in i2c_imx_dma_request()
Documentation/devicetree/bindings/eeprom/at24.txt | 3 +
Documentation/devicetree/bindings/i2c/i2c-mtk.txt | 1 +
.../devicetree/bindings/i2c/i2c-xscale.txt | 20 +
Documentation/i2c/fault-codes | 4 +
Documentation/i2c/gpio-fault-injection | 61 +-
MAINTAINERS | 1 -
arch/arm/mach-davinci/board-da830-evm.c | 13 +-
arch/arm/mach-davinci/board-da850-evm.c | 28 -
arch/arm/mach-davinci/board-dm365-evm.c | 13 +-
arch/arm/mach-davinci/board-dm644x-evm.c | 13 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 13 +-
arch/arm/mach-davinci/board-mityomapl138.c | 38 +-
arch/arm/mach-davinci/board-sffsdr.c | 13 +-
arch/arm/mach-davinci/common.c | 15 -
arch/arm/mach-omap1/board-nokia770.c | 18 +-
drivers/i2c/algos/i2c-algo-bit.c | 25 +-
drivers/i2c/busses/i2c-aspeed.c | 120 +++-
drivers/i2c/busses/i2c-brcmstb.c | 13 +-
drivers/i2c/busses/i2c-cbus-gpio.c | 80 +--
drivers/i2c/busses/i2c-designware-core.h | 2 +
drivers/i2c/busses/i2c-designware-master.c | 6 +
drivers/i2c/busses/i2c-designware-pcidrv.c | 7 +-
drivers/i2c/busses/i2c-designware-platdrv.c | 3 +
drivers/i2c/busses/i2c-exynos5.c | 11 +-
drivers/i2c/busses/i2c-gpio.c | 134 +++-
drivers/i2c/busses/i2c-imx.c | 37 +-
drivers/i2c/busses/i2c-iop3xx.c | 8 +
drivers/i2c/busses/i2c-mt65xx.c | 6 +-
drivers/i2c/busses/i2c-ocores.c | 308 +++++++--
drivers/i2c/busses/i2c-rcar.c | 49 +-
drivers/i2c/busses/i2c-s3c2410.c | 8 +-
drivers/i2c/busses/i2c-sh_mobile.c | 121 ++--
drivers/i2c/busses/i2c-sprd.c | 34 +-
drivers/i2c/busses/i2c-synquacer.c | 5 -
drivers/i2c/busses/i2c-tegra.c | 740 ++++++++++++++++++---
drivers/i2c/busses/i2c-zx2967.c | 8 +-
drivers/i2c/i2c-core-base.c | 12 +-
drivers/i2c/i2c-core-of.c | 14 +-
drivers/i2c/i2c-core-smbus.c | 2 +-
drivers/i2c/i2c-dev.c | 2 +-
drivers/misc/eeprom/at24.c | 169 +++--
include/linux/acpi.h | 11 -
include/linux/davinci_emac.h | 1 -
include/linux/i2c-algo-bit.h | 33 +-
include/linux/i2c.h | 45 ++
include/linux/platform_data/at24.h | 60 --
include/linux/platform_data/i2c-cbus-gpio.h | 27 -
include/linux/platform_data/i2c-ocores.h | 6 +-
include/trace/events/smbus.h | 6 +-
49 files changed, 1607 insertions(+), 760 deletions(-)
create mode 100644 Documentation/devicetree/bindings/i2c/i2c-xscale.txt
delete mode 100644 include/linux/platform_data/at24.h
delete mode 100644 include/linux/platform_data/i2c-cbus-gpio.h
Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)
Powered by blists - more mailing lists