linux-kernel - [PATCH V2 4/8] spi: lpspi: add the error info of transfer speed setting

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20190306063020.793-5-xiaoning.wang@nxp.com>
Date:   Wed, 6 Mar 2019 06:30:41 +0000
From:   Clark Wang <xiaoning.wang@....com>
To:     "broonie@...nel.org" <broonie@...nel.org>
CC:     "linux-spi@...r.kernel.org" <linux-spi@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: [PATCH V2 4/8] spi: lpspi: add the error info of transfer speed
 setting

Add a error info when set a speed which greater than half of per-clk of
spi module.

The minimum SCK period is 2 cycles(CCR[SCKDIV]). So the maximum transfer
speed is half of spi per-clk.

Signed-off-by: Clark Wang <xiaoning.wang@....com>
---
V2:
 - No change. Resend for applying.
---
 drivers/spi/spi-fsl-lpspi.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi-fsl-lpspi.c b/drivers/spi/spi-fsl-lpspi.c
index 84dcb9e176b8..69635cde0e22 100644
--- a/drivers/spi/spi-fsl-lpspi.c
+++ b/drivers/spi/spi-fsl-lpspi.c
@@ -255,6 +255,13 @@ static int fsl_lpspi_set_bitrate(struct fsl_lpspi_data *fsl_lpspi)
 	u8 prescale;
 
 	perclk_rate = clk_get_rate(fsl_lpspi->clk_per);
+
+	if (config.speed_hz > perclk_rate / 2) {
+		dev_err(fsl_lpspi->dev,
+		      "per-clk should be at least two times of transfer speed");
+		return -EINVAL;
+	}
+
 	for (prescale = 0; prescale < 8; prescale++) {
 		scldiv = perclk_rate /
 			 (clkdivs[prescale] * config.speed_hz) - 2;
@@ -304,7 +311,7 @@ static int fsl_lpspi_config(struct fsl_lpspi_data *fsl_lpspi)
 	return 0;
 }
 
-static void fsl_lpspi_setup_transfer(struct spi_device *spi,
+static int fsl_lpspi_setup_transfer(struct spi_device *spi,
 				     struct spi_transfer *t)
 {
 	struct fsl_lpspi_data *fsl_lpspi =
@@ -337,7 +344,7 @@ static void fsl_lpspi_setup_transfer(struct spi_device *spi,
 	else
 		fsl_lpspi->watermark = fsl_lpspi->txfifosize;
 
-	fsl_lpspi_config(fsl_lpspi);
+	return fsl_lpspi_config(fsl_lpspi);
 }
 
 static int fsl_lpspi_slave_abort(struct spi_controller *controller)
@@ -429,7 +436,10 @@ static int fsl_lpspi_transfer_one_msg(struct spi_controller *controller,
 	msg->actual_length = 0;
 
 	list_for_each_entry(xfer, &msg->transfers, transfer_list) {
-		fsl_lpspi_setup_transfer(spi, xfer);
+		ret = fsl_lpspi_setup_transfer(spi, xfer);
+		if (ret < 0)
+			goto complete;
+
 		fsl_lpspi_set_cmd(fsl_lpspi, is_first_xfer);
 
 		is_first_xfer = false;
-- 
2.17.1