linux-kernel - [PATCH 4/8] ARM: dts: qcom: pma8084: add gpio-ranges

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190306005316.12232-5-masneyb@onstation.org>
Date:   Tue,  5 Mar 2019 19:53:12 -0500
From:   Brian Masney <masneyb@...tation.org>
To:     andy.gross@...aro.org
Cc:     david.brown@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
        linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, linus.walleij@...aro.org,
        linux-gpio@...r.kernel.org
Subject: [PATCH 4/8] ARM: dts: qcom: pma8084: add gpio-ranges

This adds the gpio-ranges property so that the GPIO pins are initialized
by the GPIO framework and not pinctrl. This fixes a circular dependency
between these two frameworks so GPIO hogging can be used on this board.

This was not tested on this particular hardware, however this same
change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone.

Signed-off-by: Brian Masney <masneyb@...tation.org>
---
 arch/arm/boot/dts/qcom-pma8084.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/qcom-pma8084.dtsi b/arch/arm/boot/dts/qcom-pma8084.dtsi
index 8f5ea7add20f..ea1ca166165c 100644
--- a/arch/arm/boot/dts/qcom-pma8084.dtsi
+++ b/arch/arm/boot/dts/qcom-pma8084.dtsi
@@ -31,6 +31,7 @@
 			compatible = "qcom,pma8084-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;
 			gpio-controller;
+			gpio-ranges = <&pma8084_gpios 0 0 22>;
 			#gpio-cells = <2>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
-- 
2.20.1