| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 6 Mar 2019 08:24:06 +0100
From: Lukasz Luba <l.luba@...tner.samsung.com>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org,
"linux-samsung-soc@...r.kernel.org"
<linux-samsung-soc@...r.kernel.org>,
Bartłomiej Żołnierkiewicz
<b.zolnierkie@...sung.com>, kgene@...nel.org,
Chanwoo Choi <cw00.choi@...sung.com>,
kyungmin.park@...sung.com,
Marek Szyprowski <m.szyprowski@...sung.com>,
s.nawrocki@...sung.com, myungjoo.ham@...sung.com
Subject: Re: [PATCH v5 6/8] DT: arm: exynos: add DMC device for exynos5422
Hi Krzysztof,
On 3/5/19 12:36 PM, Krzysztof Kozlowski wrote:
> On Tue, 5 Mar 2019 at 11:19, Lukasz Luba <l.luba@...tner.samsung.com>
> wrote:>> Add description of Dynamic Memory Controller and PPMU
> counters.> They are used by exynos5422-dmc driver.>> Signed-off-by:
> Lukasz Luba <l.luba@...tner.samsung.com>In previous email I asked to
> fix the subject prefix in case of resend. Please fix it.
>
>> ---
>> arch/arm/boot/dts/exynos5420.dtsi | 83 +++++++++++++++++++++++++
>> arch/arm/boot/dts/exynos5422-odroid-core.dtsi | 87 +++++++++++++++++++++++++++
>> 2 files changed, 170 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi
>> index aaff158..fc00fda 100644
>> --- a/arch/arm/boot/dts/exynos5420.dtsi
>> +++ b/arch/arm/boot/dts/exynos5420.dtsi
>> @@ -235,6 +235,41 @@
>> status = "disabled";
>> };
>>
>> + dmc: memory-controller@...20000 {
>> + compatible = "samsung,exynos5422-dmc";
>> + reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>,
>> + <0x10000000 0x1000>;
>> + clocks = <&clock CLK_FOUT_SPLL>,
>> + <&clock CLK_MOUT_SCLK_SPLL>,
>> + <&clock CLK_FF_DOUT_SPLL2>,
>> + <&clock CLK_FOUT_BPLL>,
>> + <&clock CLK_MOUT_BPLL>,
>> + <&clock CLK_SCLK_BPLL>,
>> + <&clock CLK_MOUT_MX_MSPLL_CCORE>,
>> + <&clock CLK_MOUT_MX_MSPLL_CCORE_PHY>,
>> + <&clock CLK_MOUT_MCLK_CDREX>,
>> + <&clock CLK_DOUT_CLK2X_PHY0>,
>> + <&clock CLK_CLKM_PHY0>,
>> + <&clock CLK_CLKM_PHY1>,
>> + <&clock CLK_CDREX_PAUSE>,
>> + <&clock CLK_CDREX_TIMING_SET>;
>> + clock-names = "fout_spll",
>> + "mout_sclk_spll",
>> + "ff_dout_spll2",
>> + "fout_bpll",
>> + "mout_bpll",
>> + "sclk_bpll",
>> + "mout_mx_mspll_ccore",
>> + "mout_mx_mspll_ccore_phy",
>> + "mout_mclk_cdrex",
>> + "dout_clk2x_phy0",
>> + "clkm_phy0",
>> + "clkm_phy1",
>> + "clk_cdrex_pause",
>> + "clk_cdrex_timing_set";
>> + status = "disabled";
>> + };
>> +
>> nocp_mem0_0: nocp@...a1000 {
>> compatible = "samsung,exynos5420-nocp";
>> reg = <0x10CA1000 0x200>;
>> @@ -271,6 +306,54 @@
>> status = "disabled";
>> };
>>
>> + ppmu_dmc0_0: ppmu@...00000 {
>> + compatible = "samsung,exynos-ppmu";
>> + reg = <0x10d00000 0x2000>;
>> + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
>> + clock-names = "ppmu";
>> + events {
>> + ppmu_event_dmc0_0: ppmu-event3-dmc0_0 {
>> + event-name = "ppmu-event3-dmc0_0";
>> + };
>> + };
>> + };
>> +
>> + ppmu_dmc0_1: ppmu@...10000 {
>> + compatible = "samsung,exynos-ppmu";
>> + reg = <0x10d10000 0x2000>;
>> + clocks = <&clock CLK_PCLK_PPMU_DREX0_1>;
>> + clock-names = "ppmu";
>> + events {
>> + ppmu_event_dmc0_1: ppmu-event3-dmc0_1 {
>> + event-name = "ppmu-event3-dmc0_1";
>> + };
>> + };
>> + };
>> +
>> + ppmu_dmc1_0: ppmu@...10000 {
>> + compatible = "samsung,exynos-ppmu";
>> + reg = <0x10d60000 0x2000>;
>> + clocks = <&clock CLK_PCLK_PPMU_DREX1_0>;
>> + clock-names = "ppmu";
>> + events {
>> + ppmu_event_dmc1_0: ppmu-event3-dmc1_0 {
>> + event-name = "ppmu-event3-dmc1_0";
>> + };
>> + };
>> + };
>> +
>> + ppmu_dmc1_1: ppmu@...70000 {
>> + compatible = "samsung,exynos-ppmu";
>> + reg = <0x10d70000 0x2000>;
>> + clocks = <&clock CLK_PCLK_PPMU_DREX1_1>;
>> + clock-names = "ppmu";
>> + events {
>> + ppmu_event_dmc1_1: ppmu-event3-dmc1_1 {
>> + event-name = "ppmu-event3-dmc1_1";
>> + };
>> + };
>> + };
>> +
>> gsc_pd: power-domain@...44000 {
>> compatible = "samsung,exynos4210-pd";
>> reg = <0x10044000 0x20>;
>> diff --git a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
>> index bf09eab..6b28fb3 100644
>> --- a/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
>> +++ b/arch/arm/boot/dts/exynos5422-odroid-core.dtsi
>> @@ -34,6 +34,69 @@
>> clock-frequency = <24000000>;
>> };
>> };
>> +
>> + dmc_opp_table: opp_table2 {
>> + compatible = "operating-points-v2";
>> +
>> + opp00 {
>> + opp-hz = /bits/ 64 <165000000>;
>> + opp-microvolt = <875000>;
>> + };
>> + opp01 {
>> + opp-hz = /bits/ 64 <206000000>;
>> + opp-microvolt = <875000>;
>> + };
>> + opp02 {
>> + opp-hz = /bits/ 64 <275000000>;
>> + opp-microvolt = <875000>;
>> + };
>> + opp03 {
>> + opp-hz = /bits/ 64 <413000000>;
>> + opp-microvolt = <887500>;
>> + };
>> + opp04 {
>> + opp-hz = /bits/ 64 <543000000>;
>> + opp-microvolt = <937500>;
>> + };
>> + opp05 {
>> + opp-hz = /bits/ 64 <633000000>;
>> + opp-microvolt = <1012500>;
>> + };
>> + opp06 {
>> + opp-hz = /bits/ 64 <728000000>;
>> + opp-microvolt = <1037500>;
>> + };
>> + opp07 {
>> + opp-hz = /bits/ 64 <825000000>;
>> + opp-microvolt = <1050000>;
>> + };
>> + };
>> +
>> + dmc_bypass_mode: bypass_mode {
>> + compatible = "samsung,dmc-bypass-mode";
>> +
>> + freq-hz = <400000000>;
>> + volt-uv = <887500>;
>> + dram-timing-row = <0x365a9713>;
>> + dram-timing-data = <0x4740085e>;
>> + dram-timing-power = <0x543a0446>;
>> + };
>> +
>> + dram_timing: timing {
>> + compatible = "samsung,dram-timing";
>> +
>> + dram-timing-names = "165MHz", "206MHz", "275MHz", "413MHz",
>> + "543MHz", "633MHz", "728MHz", "825MHz";
>> + dram-timing-row = <0x11223185>, <0x112331C6>, <0x12244287>,
>> + <0x1B35538A>, <0x244764CD>, <0x2A48758F>,
>> + <0x30598651>, <0x365A9713>;
>> + dram-timing-data = <0x2720085E>, <0x2720085E>, <0x2720085E>,
>> + <0x2720085E>, <0x3730085E>, <0x3730085E>,
>> + <0x3730085E>, <0x4740085E>;
>> + dram-timing-power = <0x140C0225>, <0x180F0225>, <0x1C140225>,
>> + <0x2C1D0225>, <0x38270335>, <0x402D0335>,
>> + <0x4C330336>, <0x543A0446>;
>> + };
>> };
>>
>> &bus_wcore {
>> @@ -127,6 +190,14 @@
>> cpu-supply = <&buck2_reg>;
>> };
>>
>> +&dmc {
>> + devfreq-events = <&ppmu_dmc0_0>, <&ppmu_dmc0_1>,
>> + <&ppmu_dmc1_0>, <&ppmu_dmc1_1>;
>> +
>> + operating-points-v2 = <&dmc_opp_table>;
>
> The opp-tables have voltage entry but I do not see the regulator
> supply. How do you change the voltage?
Right. There is a missing entry in &dmc node
vdd-supply = <&buck1_reg>;
In the driver code it is taken by name "vdd_mif".
Regards,
Lukasz
>
> Best regards,
> Krzysztof
>
>
Powered by blists - more mailing lists