lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 6 Mar 2019 18:49:10 +0800
From:   Nicolas Boichat <drinkcat@...omium.org>
To:     Qii Wang <qii.wang@...iatek.com>
Cc:     wsa@...-dreams.de, linux-i2c@...r.kernel.org,
        devicetree@...r.kernel.org,
        linux-arm Mailing List <linux-arm-kernel@...ts.infradead.org>,
        lkml <linux-kernel@...r.kernel.org>,
        "moderated list:ARM/Mediatek SoC support" 
        <linux-mediatek@...ts.infradead.org>,
        srv_heupstream <srv_heupstream@...iatek.com>,
        Leilk Liu <leilk.liu@...iatek.com>, xinping.qian@...iatek.com,
        liguo.zhang@...iatek.com, Rob Herring <robh@...nel.org>
Subject: Re: [PATCH v5 3/5] i2c: mediatek: Add arb clock in i2c driver

One thing I missed from Matthias' comment on v4:
https://patchwork.kernel.org/patch/10822083/

On Wed, Mar 6, 2019 at 6:44 PM Nicolas Boichat <drinkcat@...omium.org> wrote:
>
> On Tue, Feb 26, 2019 at 9:11 PM Qii Wang <qii.wang@...iatek.com> wrote:
> >
> > When two i2c controllers are internally connected to the same
> > GPIO pins, the arb clock is needed to ensure that the waveforms
> > do not interfere with each other.
> >
> > Signed-off-by: Qii Wang <qii.wang@...iatek.com>
>
> Reviewed-by: Nicolas Boichat <drinkcat@...omium.org>
>
> > ---
> >  drivers/i2c/busses/i2c-mt65xx.c |   25 ++++++++++++++++++++++---
> >  1 file changed, 22 insertions(+), 3 deletions(-)
> >
> > diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
> > index 428ac99..14d6b38 100644
> > --- a/drivers/i2c/busses/i2c-mt65xx.c
> > +++ b/drivers/i2c/busses/i2c-mt65xx.c
> > @@ -35,6 +35,7 @@
> >  #include <linux/slab.h>
> >
> >  #define I2C_RS_TRANSFER                        (1 << 4)
> > +#define I2C_ARB_LOST                   (1 << 3)
> >  #define I2C_HS_NACKERR                 (1 << 2)
> >  #define I2C_ACKERR                     (1 << 1)
> >  #define I2C_TRANSAC_COMP               (1 << 0)
> > @@ -181,6 +182,7 @@ struct mtk_i2c {
> >         struct clk *clk_main;           /* main clock for i2c bus */
> >         struct clk *clk_dma;            /* DMA clock for i2c via DMA */
> >         struct clk *clk_pmic;           /* PMIC clock for i2c from PMIC */
> > +       struct clk *clk_arb;            /* Arbitrator clock for i2c */
> >         bool have_pmic;                 /* can use i2c pins from PMIC */
> >         bool use_push_pull;             /* IO config push-pull mode */
> >
> > @@ -299,8 +301,18 @@ static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
> >                 if (ret)
> >                         goto err_pmic;
> >         }
> > +
> > +       if (i2c->clk_arb) {
> > +               ret = clk_prepare_enable(i2c->clk_arb);
> > +               if (ret)
> > +                       goto err_arb;
> > +       }
> > +
> >         return 0;
> >
> > +err_arb:
> > +       if (i2c->have_pmic)
> > +               clk_disable_unprepare(i2c->clk_pmic);
> >  err_pmic:
> >         clk_disable_unprepare(i2c->clk_main);
> >  err_main:
> > @@ -311,6 +323,9 @@ static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
> >
> >  static void mtk_i2c_clock_disable(struct mtk_i2c *i2c)
> >  {
> > +       if (i2c->clk_arb)
> > +               clk_disable_unprepare(i2c->clk_arb);
> > +
> >         if (i2c->have_pmic)
> >                 clk_disable_unprepare(i2c->clk_pmic);
> >
> > @@ -519,13 +534,13 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> >
> >         /* Clear interrupt status */
> >         mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
> > -              I2C_TRANSAC_COMP, OFFSET_INTR_STAT);
> > +                           I2C_ARB_LOST | I2C_TRANSAC_COMP, OFFSET_INTR_STAT);

Is it ok to set I2C_ARB_LOST on _all_ SoC that this driver supports?
If so, please at least say so in the commit message.

> >
> >         mtk_i2c_writew(i2c, I2C_FIFO_ADDR_CLR, OFFSET_FIFO_ADDR_CLR);
> >
> >         /* Enable interrupt */
> >         mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
> > -              I2C_TRANSAC_COMP, OFFSET_INTR_MASK);
> > +                           I2C_ARB_LOST | I2C_TRANSAC_COMP, OFFSET_INTR_MASK);
> >
> >         /* Set transfer and transaction len */
> >         if (i2c->op == I2C_MASTER_WRRD) {
> > @@ -659,7 +674,7 @@ static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
> >
> >         /* Clear interrupt mask */
> >         mtk_i2c_writew(i2c, ~(restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
> > -              I2C_TRANSAC_COMP), OFFSET_INTR_MASK);
> > +                           I2C_ARB_LOST | I2C_TRANSAC_COMP), OFFSET_INTR_MASK);
> >
> >         if (i2c->op == I2C_MASTER_WR) {
> >                 dma_unmap_single(i2c->dev, wpaddr,
> > @@ -884,6 +899,10 @@ static int mtk_i2c_probe(struct platform_device *pdev)
> >                 return PTR_ERR(i2c->clk_dma);
> >         }
> >
> > +       i2c->clk_arb = devm_clk_get(&pdev->dev, "arb");
> > +       if (IS_ERR(i2c->clk_arb))
> > +               i2c->clk_arb = NULL;
> > +
> >         clk = i2c->clk_main;
> >         if (i2c->have_pmic) {
> >                 i2c->clk_pmic = devm_clk_get(&pdev->dev, "pmic");
> > --
> > 1.7.9.5
> >

Powered by blists - more mailing lists