lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 6 Mar 2019 10:31:20 +0900
From:   Chanwoo Choi <cw00.choi@...sung.com>
To:     Lukasz Luba <l.luba@...tner.samsung.com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-pm@...r.kernel.org, linux-samsung-soc@...r.kernel.org
Cc:     b.zolnierkie@...sung.com, krzk@...nel.org, kgene@...nel.org,
        kyungmin.park@...sung.com, m.szyprowski@...sung.com,
        s.nawrocki@...sung.com, myungjoo.ham@...sung.com
Subject: Re: [PATCH v5 3/8] clk: samsung: add BPLL rate table for Exynos
 5422 SoC

Hi Lukasz,

I'm talking about it repeatedly. How many times already, I mentioned
that you have to resend the patch after completed the discussion.


I replied this v3 patch[2]. But, you didn't reply or answer anything
and then just send the same patch without any consent.

- Re: [PATCH v3 3/8] clk: samsung: add BPLL rate table for Exynos 5422 SoC
[2] https://lkml.org/lkml/2019/2/11/198



On 19. 3. 5. 오후 7:19, Lukasz Luba wrote:
> Add new table rate for BPLL for Exynos5422 SoC supporting Dynamic Memory
> Controller frequencies for driver's DRAM timings.
> 
> Signed-off-by: Lukasz Luba <l.luba@...tner.samsung.com>
> ---
>  drivers/clk/samsung/clk-exynos5420.c | 13 ++++++++++++-
>  1 file changed, 12 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> index 6da5875..6f5db70 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -1331,6 +1331,17 @@ static const struct samsung_pll_rate_table exynos5420_pll2550x_24mhz_tbl[] __ini
>  	PLL_35XX_RATE(24 * MHZ, 200000000,  200, 3, 3),
>  };
>  
> +static const struct samsung_pll_rate_table exynos5422_bpll_rate_table[] = {
> +	PLL_35XX_RATE(24 * MHZ, 825000000, 275, 4, 1),
> +	PLL_35XX_RATE(24 * MHZ, 728000000, 182, 3, 1),
> +	PLL_35XX_RATE(24 * MHZ, 633000000, 211, 4, 1),
> +	PLL_35XX_RATE(24 * MHZ, 543000000, 181, 2, 2),
> +	PLL_35XX_RATE(24 * MHZ, 413000000, 413, 6, 2),
> +	PLL_35XX_RATE(24 * MHZ, 275000000, 275, 3, 3),
> +	PLL_35XX_RATE(24 * MHZ, 206000000, 206, 3, 3),
> +	PLL_35XX_RATE(24 * MHZ, 165000000, 110, 2, 3),
> +};
> +
>  static const struct samsung_pll_rate_table exynos5420_epll_24mhz_tbl[] = {
>  	PLL_36XX_RATE(24 * MHZ, 600000000U, 100, 2, 1, 0),
>  	PLL_36XX_RATE(24 * MHZ, 400000000U, 200, 3, 2, 0),
> @@ -1473,7 +1484,7 @@ static void __init exynos5x_clk_init(struct device_node *np,
>  		exynos5x_plls[apll].rate_table = exynos5420_pll2550x_24mhz_tbl;
>  		exynos5x_plls[epll].rate_table = exynos5420_epll_24mhz_tbl;
>  		exynos5x_plls[kpll].rate_table = exynos5420_pll2550x_24mhz_tbl;
> -		exynos5x_plls[bpll].rate_table = exynos5420_pll2550x_24mhz_tbl;
> +		exynos5x_plls[bpll].rate_table = exynos5422_bpll_rate_table;
>  	}
>  
>  	samsung_clk_register_pll(ctx, exynos5x_plls, ARRAY_SIZE(exynos5x_plls),
> 


-- 
Best Regards,
Chanwoo Choi
Samsung Electronics

Powered by blists - more mailing lists