| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1551898384-19624-1-git-send-email-info@metux.net>
Date: Wed, 6 Mar 2019 19:53:04 +0100
From: "Enrico Weigelt, metux IT consult" <info@...ux.net>
To: linux-kernel@...r.kernel.org
Cc: jejb@...ux.ibm.com, martin.petersen@...cle.com,
ooo@...ctrozaur.com, linux-scsi@...r.kernel.org,
esc.storagedev@...rosemi.com
Subject: [PATCH] drivers: scsi: Kconfig: pedantic cleanups
Signed-off-by: Enrico Weigelt, metux IT consult <info@...ux.net>
---
drivers/scsi/Kconfig | 63 +++++++++++++++++++++----------------------
drivers/scsi/osd/Kconfig | 38 +++++++++++++-------------
drivers/scsi/pcmcia/Kconfig | 2 +-
drivers/scsi/qedf/Kconfig | 8 +++---
drivers/scsi/smartpqi/Kconfig | 16 +++++------
5 files changed, 63 insertions(+), 64 deletions(-)
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index f38882f..7a9eab1 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -1,9 +1,9 @@
menu "SCSI device support"
config SCSI_MOD
- tristate
- default y if SCSI=n || SCSI=y
- default m if SCSI=m
+ tristate
+ default y if SCSI=n || SCSI=y
+ default m if SCSI=m
config RAID_ATTRS
tristate "RAID Transport Class"
@@ -47,7 +47,7 @@ config SCSI_ESP_PIO
config SCSI_NETLINK
bool
- default n
+ default n
depends on NET
config SCSI_PROC_FS
@@ -307,25 +307,25 @@ config ISCSI_TCP
select CRYPTO_CRC32C
select SCSI_ISCSI_ATTRS
help
- The iSCSI Driver provides a host with the ability to access storage
- through an IP network. The driver uses the iSCSI protocol to transport
- SCSI requests and responses over a TCP/IP network between the host
- (the "initiator") and "targets". Architecturally, the iSCSI driver
- combines with the host's TCP/IP stack, network drivers, and Network
- Interface Card (NIC) to provide the same functions as a SCSI or a
- Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
+ The iSCSI Driver provides a host with the ability to access storage
+ through an IP network. The driver uses the iSCSI protocol to transport
+ SCSI requests and responses over a TCP/IP network between the host
+ (the "initiator") and "targets". Architecturally, the iSCSI driver
+ combines with the host's TCP/IP stack, network drivers, and Network
+ Interface Card (NIC) to provide the same functions as a SCSI or a
+ Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
- To compile this driver as a module, choose M here: the
- module will be called iscsi_tcp.
+ To compile this driver as a module, choose M here: the
+ module will be called iscsi_tcp.
- The userspace component needed to initialize the driver, documentation,
- and sample configuration files can be found here:
+ The userspace component needed to initialize the driver, documentation,
+ and sample configuration files can be found here:
- http://open-iscsi.org
+ http://open-iscsi.org
config ISCSI_BOOT_SYSFS
tristate "iSCSI Boot Sysfs Interface"
- default n
+ default n
help
This option enables support for exposing iSCSI boot information
via sysfs to userspace. If you wish to export this information,
@@ -340,7 +340,7 @@ source "drivers/scsi/cxlflash/Kconfig"
config SGIWD93_SCSI
tristate "SGI WD93C93 SCSI Driver"
depends on SGI_HAS_WD93 && SCSI
- help
+ help
If you have a Western Digital WD93 SCSI controller on
an SGI MIPS system, say Y. Otherwise, say N.
@@ -455,7 +455,6 @@ config SCSI_AACRAID
To compile this driver as a module, choose M here: the module
will be called aacraid.
-
source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
source "drivers/scsi/aic94xx/Kconfig"
@@ -475,7 +474,7 @@ config SCSI_DPT_I2O
tristate "Adaptec I2O RAID support "
depends on SCSI && PCI && VIRT_TO_BUS
help
- This driver supports all of Adaptec's I2O based RAID controllers as
+ This driver supports all of Adaptec's I2O based RAID controllers as
well as the DPT SmartRaid V cards. This is an Adaptec maintained
driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>.
@@ -669,7 +668,7 @@ config SCSI_GDTH
---help---
Formerly called GDT SCSI Disk Array Controller Support.
- This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
+ This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI)
manufactured by Intel Corporation/ICP vortex GmbH. It is documented
in the kernel source in <file:drivers/scsi/gdth.c> and
<file:drivers/scsi/gdth.h>.
@@ -1152,8 +1151,8 @@ config SCSI_LPFC
depends on NVME_FC || NVME_FC=n
select CRC_T10DIF
---help---
- This lpfc driver supports the Emulex LightPulse
- Family of Fibre Channel PCI host adapters.
+ This lpfc driver supports the Emulex LightPulse
+ Family of Fibre Channel PCI host adapters.
config SCSI_LPFC_DEBUG_FS
bool "Emulex LightPulse Fibre Channel debugfs Support"
@@ -1468,14 +1467,14 @@ config ZFCP
depends on S390 && QDIO && SCSI
depends on SCSI_FC_ATTRS
help
- If you want to access SCSI devices attached to your IBM eServer
- zSeries by means of Fibre Channel interfaces say Y.
- For details please refer to the documentation provided by IBM at
- <http://oss.software.ibm.com/developerworks/opensource/linux390>
+ If you want to access SCSI devices attached to your IBM eServer
+ zSeries by means of Fibre Channel interfaces say Y.
+ For details please refer to the documentation provided by IBM at
+ <http://oss.software.ibm.com/developerworks/opensource/linux390>
- This driver is also available as a module. This module will be
- called zfcp. If you want to compile it as a module, say M here
- and read <file:Documentation/kbuild/modules.txt>.
+ This driver is also available as a module. This module will be
+ called zfcp. If you want to compile it as a module, say M here
+ and read <file:Documentation/kbuild/modules.txt>.
config SCSI_PMCRAID
tristate "PMC SIERRA Linux MaxRAID adapter support"
@@ -1506,8 +1505,8 @@ config SCSI_VIRTIO
tristate "virtio-scsi support"
depends on VIRTIO
help
- This is the virtual HBA driver for virtio. If the kernel will
- be used in a virtual machine, say Y or M.
+ This is the virtual HBA driver for virtio. If the kernel will
+ be used in a virtual machine, say Y or M.
source "drivers/scsi/csiostor/Kconfig"
diff --git a/drivers/scsi/osd/Kconfig b/drivers/scsi/osd/Kconfig
index 347cc5e..90b08c3 100644
--- a/drivers/scsi/osd/Kconfig
+++ b/drivers/scsi/osd/Kconfig
@@ -15,35 +15,35 @@ config SCSI_OSD_INITIATOR
tristate "OSD-Initiator library"
depends on SCSI
help
- Enable the OSD-Initiator library (libosd.ko).
- NOTE: You must also select CRYPTO_SHA1 + CRYPTO_HMAC and their
- dependencies
+ Enable the OSD-Initiator library (libosd.ko).
+ NOTE: You must also select CRYPTO_SHA1 + CRYPTO_HMAC and their
+ dependencies
config SCSI_OSD_ULD
tristate "OSD Upper Level driver"
depends on SCSI_OSD_INITIATOR
help
- Build a SCSI upper layer driver that exports /dev/osdX devices
- to user-mode for testing and controlling OSD devices. It is also
- needed by exofs, for mounting an OSD based file system.
+ Build a SCSI upper layer driver that exports /dev/osdX devices
+ to user-mode for testing and controlling OSD devices. It is also
+ needed by exofs, for mounting an OSD based file system.
config SCSI_OSD_DPRINT_SENSE
- int "(0-2) When sense is returned, DEBUG print all sense descriptors"
- default 1
- depends on SCSI_OSD_INITIATOR
- help
- When a CHECK_CONDITION status is returned from a target, and a
- sense-buffer is retrieved, turning this on will dump a full
- sense-decoding message. Setting to 2 will also print recoverable
- errors that might be regularly returned for some filesystem
- operations.
+ int "(0-2) When sense is returned, DEBUG print all sense descriptors"
+ default 1
+ depends on SCSI_OSD_INITIATOR
+ help
+ When a CHECK_CONDITION status is returned from a target, and a
+ sense-buffer is retrieved, turning this on will dump a full
+ sense-decoding message. Setting to 2 will also print recoverable
+ errors that might be regularly returned for some filesystem
+ operations.
config SCSI_OSD_DEBUG
bool "Compile All OSD modules with lots of DEBUG prints"
default n
depends on SCSI_OSD_INITIATOR
help
- OSD Code is populated with lots of OSD_DEBUG(..) printouts to
- dmesg. Enable this if you found a bug and you want to help us
- track the problem (see also MAINTAINERS). Setting this will also
- force SCSI_OSD_DPRINT_SENSE=2.
+ OSD Code is populated with lots of OSD_DEBUG(..) printouts to
+ dmesg. Enable this if you found a bug and you want to help us
+ track the problem (see also MAINTAINERS). Setting this will also
+ force SCSI_OSD_DPRINT_SENSE=2.
diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig
index 2d435f1..b63b34d 100644
--- a/drivers/scsi/pcmcia/Kconfig
+++ b/drivers/scsi/pcmcia/Kconfig
@@ -32,7 +32,7 @@ config PCMCIA_NINJA_SCSI
NinjaSCSI-3: (version string: "WBT","NinjaSCSI-3","R1.0")
IO-DATA PCSC-FP
ALPHA DATA AD-PCS201
- CyQ've SFC-201
+ CyQ've SFC-201
LOGITECH LPM-SCSI2E
Pioneer PCR-PR24's card
I-O DATA CDPS-PX24's card (PCSC-F)
diff --git a/drivers/scsi/qedf/Kconfig b/drivers/scsi/qedf/Kconfig
index 943f5ee..e2693db 100644
--- a/drivers/scsi/qedf/Kconfig
+++ b/drivers/scsi/qedf/Kconfig
@@ -2,10 +2,10 @@ config QEDF
tristate "QLogic QEDF 25/40/100Gb FCoE Initiator Driver Support"
depends on PCI && SCSI
depends on QED
- depends on LIBFC
- depends on LIBFCOE
+ depends on LIBFC
+ depends on LIBFCOE
select QED_LL2
select QED_FCOE
---help---
- This driver supports FCoE offload for the QLogic FastLinQ
- 41000 Series Converged Network Adapters.
+ This driver supports FCoE offload for the QLogic FastLinQ
+ 41000 Series Converged Network Adapters.
diff --git a/drivers/scsi/smartpqi/Kconfig b/drivers/scsi/smartpqi/Kconfig
index 97e159c..fafc7f7 100644
--- a/drivers/scsi/smartpqi/Kconfig
+++ b/drivers/scsi/smartpqi/Kconfig
@@ -41,14 +41,14 @@ config SCSI_SMARTPQI
select SCSI_SAS_ATTRS
select RAID_ATTRS
---help---
- This driver supports Microsemi PQI controllers.
+ This driver supports Microsemi PQI controllers.
- <http://www.microsemi.com>
+ <http://www.microsemi.com>
- To compile this driver as a module, choose M here: the
- module will be called smartpqi.
+ To compile this driver as a module, choose M here: the
+ module will be called smartpqi.
- Note: the aacraid driver will not manage a smartpqi
- controller. You need to enable smartpqi for smartpqi
- controllers. For more information, please see
- Documentation/scsi/smartpqi.txt
+ Note: the aacraid driver will not manage a smartpqi
+ controller. You need to enable smartpqi for smartpqi
+ controllers. For more information, please see
+ Documentation/scsi/smartpqi.txt
--
1.9.1
Powered by blists - more mailing lists