| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1551909774-24030-1-git-send-email-info@metux.net>
Date: Wed, 6 Mar 2019 23:02:54 +0100
From: "Enrico Weigelt, metux IT consult" <info@...ux.net>
To: linux-kernel@...r.kernel.org
Cc: kurt.schwemmer@...rosemi.com, logang@...tatee.com,
linux-ntb@...glegroups.com, linux-pci@...r.kernel.org
Subject: [PATCH v2] drivers: ntb: Kconfig: pedantic cleanups
Formatting of Kconfig files doesn't look so pretty, so just
take damp cloth and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <info@...ux.net>
---
drivers/ntb/Kconfig | 20 ++++++++++----------
drivers/ntb/hw/amd/Kconfig | 4 ++--
drivers/ntb/hw/idt/Kconfig | 41 ++++++++++++++++++++---------------------
drivers/ntb/hw/intel/Kconfig | 4 ++--
drivers/ntb/hw/mscc/Kconfig | 8 ++++----
drivers/ntb/test/Kconfig | 26 +++++++++++++-------------
6 files changed, 51 insertions(+), 52 deletions(-)
diff --git a/drivers/ntb/Kconfig b/drivers/ntb/Kconfig
index 95944e5..5ce3fdd 100644
--- a/drivers/ntb/Kconfig
+++ b/drivers/ntb/Kconfig
@@ -2,13 +2,13 @@ menuconfig NTB
tristate "Non-Transparent Bridge support"
depends on PCI
help
- The PCI-E Non-transparent bridge hardware is a point-to-point PCI-E bus
- connecting 2 systems. When configured, writes to the device's PCI
- mapped memory will be mirrored to a buffer on the remote system. The
- ntb Linux driver uses this point-to-point communication as a method to
- transfer data from one system to the other.
+ The PCI-E Non-transparent bridge hardware is a point-to-point PCI-E bus
+ connecting 2 systems. When configured, writes to the device's PCI
+ mapped memory will be mirrored to a buffer on the remote system. The
+ ntb Linux driver uses this point-to-point communication as a method to
+ transfer data from one system to the other.
- If unsure, say N.
+ If unsure, say N.
if NTB
@@ -19,10 +19,10 @@ source "drivers/ntb/test/Kconfig"
config NTB_TRANSPORT
tristate "NTB Transport Client"
help
- This is a transport driver that enables connected systems to exchange
- messages over the ntb hardware. The transport exposes a queue pair api
- to client drivers.
+ This is a transport driver that enables connected systems to exchange
+ messages over the ntb hardware. The transport exposes a queue pair api
+ to client drivers.
- If unsure, say N.
+ If unsure, say N.
endif # NTB
diff --git a/drivers/ntb/hw/amd/Kconfig b/drivers/ntb/hw/amd/Kconfig
index cfe903c..9a90f17 100644
--- a/drivers/ntb/hw/amd/Kconfig
+++ b/drivers/ntb/hw/amd/Kconfig
@@ -2,6 +2,6 @@ config NTB_AMD
tristate "AMD Non-Transparent Bridge support"
depends on X86_64
help
- This driver supports AMD NTB on capable Zeppelin hardware.
+ This driver supports AMD NTB on capable Zeppelin hardware.
- If unsure, say N.
+ If unsure, say N.
diff --git a/drivers/ntb/hw/idt/Kconfig b/drivers/ntb/hw/idt/Kconfig
index f8948cf..5d106ac 100644
--- a/drivers/ntb/hw/idt/Kconfig
+++ b/drivers/ntb/hw/idt/Kconfig
@@ -3,28 +3,27 @@ config NTB_IDT
depends on PCI
select HWMON
help
- This driver supports NTB of cappable IDT PCIe-switches.
+ This driver supports NTB of cappable IDT PCIe-switches.
- Some of the pre-initializations must be made before IDT PCIe-switch
- exposes it NT-functions correctly. It should be done by either proper
- initialisation of EEPROM connected to master smbus of the switch or
- by BIOS using slave-SMBus interface changing corresponding registers
- value. Evidently it must be done before PCI bus enumeration is
- finished in Linux kernel.
+ Some of the pre-initializations must be made before IDT PCIe-switch
+ exposes it NT-functions correctly. It should be done by either proper
+ initialisation of EEPROM connected to master smbus of the switch or
+ by BIOS using slave-SMBus interface changing corresponding registers
+ value. Evidently it must be done before PCI bus enumeration is
+ finished in Linux kernel.
- First of all partitions must be activated and properly assigned to all
- the ports with NT-functions intended to be activated (see SWPARTxCTL
- and SWPORTxCTL registers). Then all NT-function BARs must be enabled
- with chosen valid aperture. For memory windows related BARs the
- aperture settings shall determine the maximum size of memory windows
- accepted by a BAR. Note that BAR0 must map PCI configuration space
- registers.
+ First of all partitions must be activated and properly assigned to all
+ the ports with NT-functions intended to be activated (see SWPARTxCTL
+ and SWPORTxCTL registers). Then all NT-function BARs must be enabled
+ with chosen valid aperture. For memory windows related BARs the
+ aperture settings shall determine the maximum size of memory windows
+ accepted by a BAR. Note that BAR0 must map PCI configuration space
+ registers.
- It's worth to note, that since a part of this driver relies on the
- BAR settings of peer NT-functions, the BAR setups can't be done over
- kernel PCI fixups. That's why the alternative pre-initialization
- techniques like BIOS using SMBus interface or EEPROM should be
- utilized.
-
- If unsure, say N.
+ It's worth to note, that since a part of this driver relies on the
+ BAR settings of peer NT-functions, the BAR setups can't be done over
+ kernel PCI fixups. That's why the alternative pre-initialization
+ techniques like BIOS using SMBus interface or EEPROM should be
+ utilized.
+ If unsure, say N.
diff --git a/drivers/ntb/hw/intel/Kconfig b/drivers/ntb/hw/intel/Kconfig
index 91f995e..c166d50 100644
--- a/drivers/ntb/hw/intel/Kconfig
+++ b/drivers/ntb/hw/intel/Kconfig
@@ -2,6 +2,6 @@ config NTB_INTEL
tristate "Intel Non-Transparent Bridge support"
depends on X86_64
help
- This driver supports Intel NTB on capable Xeon and Atom hardware.
+ This driver supports Intel NTB on capable Xeon and Atom hardware.
- If unsure, say N.
+ If unsure, say N.
diff --git a/drivers/ntb/hw/mscc/Kconfig b/drivers/ntb/hw/mscc/Kconfig
index 013ed67..74ec015 100644
--- a/drivers/ntb/hw/mscc/Kconfig
+++ b/drivers/ntb/hw/mscc/Kconfig
@@ -2,8 +2,8 @@ config NTB_SWITCHTEC
tristate "MicroSemi Switchtec Non-Transparent Bridge Support"
select PCI_SW_SWITCHTEC
help
- Enables NTB support for Switchtec PCI switches. This also
- selects the Switchtec management driver as they share the same
- hardware interface.
+ Enables NTB support for Switchtec PCI switches. This also
+ selects the Switchtec management driver as they share the same
+ hardware interface.
- If unsure, say N.
+ If unsure, say N.
diff --git a/drivers/ntb/test/Kconfig b/drivers/ntb/test/Kconfig
index a5d0eda..416ab56 100644
--- a/drivers/ntb/test/Kconfig
+++ b/drivers/ntb/test/Kconfig
@@ -1,27 +1,27 @@
config NTB_PINGPONG
tristate "NTB Ping Pong Test Client"
help
- This is a simple ping pong driver that exercises the scratchpads and
- doorbells of the ntb hardware. This driver may be used to test that
- your ntb hardware and drivers are functioning at a basic level.
+ This is a simple ping pong driver that exercises the scratchpads and
+ doorbells of the ntb hardware. This driver may be used to test that
+ your ntb hardware and drivers are functioning at a basic level.
- If unsure, say N.
+ If unsure, say N.
config NTB_TOOL
tristate "NTB Debugging Tool Test Client"
help
- This is a simple debugging driver that enables the doorbell and
- scratchpad registers to be read and written from the debugfs. This
- enables more complicated debugging to be scripted from user space.
- This driver may be used to test that your ntb hardware and drivers are
- functioning at a basic level.
+ This is a simple debugging driver that enables the doorbell and
+ scratchpad registers to be read and written from the debugfs. This
+ enables more complicated debugging to be scripted from user space.
+ This driver may be used to test that your ntb hardware and drivers are
+ functioning at a basic level.
- If unsure, say N.
+ If unsure, say N.
config NTB_PERF
tristate "NTB RAW Perf Measuring Tool"
help
- This is a tool to measure raw NTB performance by transferring data
- to and from the window without additional software interaction.
+ This is a tool to measure raw NTB performance by transferring data
+ to and from the window without additional software interaction.
- If unsure, say N.
+ If unsure, say N.
--
1.9.1
Powered by blists - more mailing lists