| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1551923412-7174-2-git-send-email-info@metux.net> Date: Thu, 7 Mar 2019 02:50:12 +0100 From: "Enrico Weigelt, metux IT consult" <info@...ux.net> To: linux-kernel@...r.kernel.org Cc: dmitry.torokhov@...il.com, linux-input@...r.kernel.org Subject: [PATCH v2] drivers: input: Kconfig: pedantic formatting Formatting of Kconfig files doesn't look so pretty, so just take damp cloth and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@...ux.net> --- drivers/input/keyboard/Kconfig | 16 ++++++++-------- drivers/input/misc/Kconfig | 26 +++++++++++++------------- drivers/input/mouse/Kconfig | 26 +++++++++++++------------- drivers/input/serio/Kconfig | 2 +- drivers/input/tablet/Kconfig | 20 ++++++++++---------- drivers/input/touchscreen/Kconfig | 2 +- 6 files changed, 46 insertions(+), 46 deletions(-) diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index a878351..ef39f5c 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -138,14 +138,14 @@ config KEYBOARD_ATKBD_RDI_KEYCODES left-hand column. config KEYBOARD_QT1070 - tristate "Atmel AT42QT1070 Touch Sensor Chip" - depends on I2C - help - Say Y here if you want to use Atmel AT42QT1070 QTouch - Sensor chip as input device. - - To compile this driver as a module, choose M here: - the module will be called qt1070 + tristate "Atmel AT42QT1070 Touch Sensor Chip" + depends on I2C + help + Say Y here if you want to use Atmel AT42QT1070 QTouch + Sensor chip as input device. + + To compile this driver as a module, choose M here: + the module will be called qt1070 config KEYBOARD_QT2160 tristate "Atmel AT42QT2160 Touch Sensor Chip" diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index ca59a2b..0ffafc0 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -240,13 +240,13 @@ config INPUT_APANEL select INPUT_POLLDEV select CHECK_SIGNATURE help - Say Y here for support of the Application Panel buttons, used on - Fujitsu Lifebook. These are attached to the mainboard through - an SMBus interface managed by the I2C Intel ICH (i801) driver, - which you should also build for this kernel. + Say Y here for support of the Application Panel buttons, used on + Fujitsu Lifebook. These are attached to the mainboard through + an SMBus interface managed by the I2C Intel ICH (i801) driver, + which you should also build for this kernel. - To compile this driver as a module, choose M here: the module will - be called apanel. + To compile this driver as a module, choose M here: the module will + be called apanel. config INPUT_GP2A tristate "Sharp GP2AP002A00F I2C Proximity/Opto sensor driver" @@ -273,12 +273,12 @@ config INPUT_GPIO_DECODER depends on GPIOLIB || COMPILE_TEST select INPUT_POLLDEV help - Say Y here if you want driver to read status of multiple GPIO - lines and report the encoded value as an absolute integer to - input subsystem. + Say Y here if you want driver to read status of multiple GPIO + lines and report the encoded value as an absolute integer to + input subsystem. - To compile this driver as a module, choose M here: the module - will be called gpio_decoder. + To compile this driver as a module, choose M here: the module + will be called gpio_decoder. config INPUT_IXP4XX_BEEPER tristate "IXP4XX Beeper support" @@ -543,8 +543,8 @@ config INPUT_PCF50633_PMU tristate "PCF50633 PMU events" depends on MFD_PCF50633 help - Say Y to include support for delivering PMU events via input - layer on NXP PCF50633. + Say Y to include support for delivering PMU events via input + layer on NXP PCF50633. config INPUT_PCF8574 tristate "PCF8574 Keypad input device" diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 566a1e3..8b7a7e0 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -91,14 +91,14 @@ config MOUSE_PS2_SYNAPTICS_SMBUS If unsure, say Y. config MOUSE_PS2_CYPRESS - bool "Cypress PS/2 mouse protocol extension" if EXPERT - default y - depends on MOUSE_PS2 - help - Say Y here if you have a Cypress PS/2 Trackpad connected to - your system. + bool "Cypress PS/2 mouse protocol extension" if EXPERT + default y + depends on MOUSE_PS2 + help + Say Y here if you have a Cypress PS/2 Trackpad connected to + your system. - If unsure, say Y. + If unsure, say Y. config MOUSE_PS2_LIFEBOOK bool "Fujitsu Lifebook PS/2 mouse protocol extension" if EXPERT @@ -285,19 +285,19 @@ config MOUSE_ELAN_I2C_I2C depends on MOUSE_ELAN_I2C default y help - Say Y here if Elan Touchpad in your system is connected to - a standard I2C controller. + Say Y here if Elan Touchpad in your system is connected to + a standard I2C controller. - If unsure, say Y. + If unsure, say Y. config MOUSE_ELAN_I2C_SMBUS bool "Enable SMbus support" depends on MOUSE_ELAN_I2C help - Say Y here if Elan Touchpad in your system is connected to - a SMbus adapter. + Say Y here if Elan Touchpad in your system is connected to + a SMbus adapter. - If unsure, say Y. + If unsure, say Y. config MOUSE_INPORT tristate "InPort/MS/ATIXL busmouse" diff --git a/drivers/input/serio/Kconfig b/drivers/input/serio/Kconfig index c9c7224..b29cb49 100644 --- a/drivers/input/serio/Kconfig +++ b/drivers/input/serio/Kconfig @@ -7,7 +7,7 @@ config SERIO help Say Yes here if you have any input device that uses serial I/O to communicate with the system. This includes the - * standard AT keyboard and PS/2 mouse * + * standard AT keyboard and PS/2 mouse * as well as serial mice, Sun keyboards, some joysticks and 6dof devices and more. diff --git a/drivers/input/tablet/Kconfig b/drivers/input/tablet/Kconfig index a2b9f97..df427d1 100644 --- a/drivers/input/tablet/Kconfig +++ b/drivers/input/tablet/Kconfig @@ -38,16 +38,16 @@ config TABLET_USB_AIPTEK module will be called aiptek. config TABLET_USB_GTCO - tristate "GTCO CalComp/InterWrite USB Support" - depends on USB && INPUT - help - Say Y here if you want to use the USB version of the GTCO - CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support" - (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" - (CONFIG_INPUT_EVDEV) as well. - - To compile this driver as a module, choose M here: the - module will be called gtco. + tristate "GTCO CalComp/InterWrite USB Support" + depends on USB && INPUT + help + Say Y here if you want to use the USB version of the GTCO + CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support" + (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support" + (CONFIG_INPUT_EVDEV) as well. + + To compile this driver as a module, choose M here: the + module will be called gtco. config TABLET_USB_HANWANG tristate "Hanwang Art Master III tablet support (USB)" diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 068dbbc..11ca597 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -632,7 +632,7 @@ config TOUCHSCREEN_HP600 depends on SH_HP6XX && SH_ADC help Say Y here if you have a HP Jornada 620/660/680/690 and want to - support the built-in touchscreen. + support the built-in touchscreen. To compile this driver as a module, choose M here: the module will be called hp680_ts_input. -- 1.9.1
Powered by blists - more mailing lists