lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1552050741-27739-2-git-send-email-ludovic.Barre@st.com>
Date:   Fri, 8 Mar 2019 14:12:20 +0100
From:   Ludovic Barre <ludovic.Barre@...com>
To:     Mark Brown <broonie@...nel.org>,
        Marek Vasut <marek.vasut@...il.com>,
        Boris Brezillon <boris.brezillon@...tlin.com>,
        Rob Herring <robh+dt@...nel.org>
CC:     Maxime Coquelin <mcoquelin.stm32@...il.com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        <linux-mtd@...ts.infradead.org>, <linux-spi@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>,
        <linux-stm32@...md-mailman.stormreply.com>,
        <devicetree@...r.kernel.org>, Ludovic Barre <ludovic.barre@...com>
Subject: [PATCH  1/2] spi: spi-mem: stm32-qspi: avoid memory corruption at low frequency

From: Ludovic Barre <ludovic.barre@...com>

This patch solves a memory corruption seen at 8 MHz.
To avoid such issue, timeout counter is disabled.

Signed-off-by: Ludovic Barre <ludovic.barre@...com>
---
 drivers/spi/spi-stm32-qspi.c | 4 +---
 1 file changed, 1 insertion(+), 3 deletions(-)

diff --git a/drivers/spi/spi-stm32-qspi.c b/drivers/spi/spi-stm32-qspi.c
index 3b2a9a6..7354f9d 100644
--- a/drivers/spi/spi-stm32-qspi.c
+++ b/drivers/spi/spi-stm32-qspi.c
@@ -76,7 +76,6 @@
 #define QSPI_PSMAR		0x28
 #define QSPI_PIR		0x2c
 #define QSPI_LPTR		0x30
-#define LPTR_DFT_TIMEOUT	0x10
 
 #define STM32_QSPI_MAX_MMAP_SZ	SZ_256M
 #define STM32_QSPI_MAX_NORCHIP	2
@@ -372,8 +371,7 @@ static int stm32_qspi_setup(struct spi_device *spi)
 	flash->presc = presc;
 
 	mutex_lock(&qspi->lock);
-	writel_relaxed(LPTR_DFT_TIMEOUT, qspi->io_base + QSPI_LPTR);
-	cr = FIELD_PREP(CR_FTHRES_MASK, 3) | CR_TCEN | CR_SSHIFT | CR_EN;
+	cr = FIELD_PREP(CR_FTHRES_MASK, 3) | CR_SSHIFT | CR_EN;
 	writel_relaxed(cr, qspi->io_base + QSPI_CR);
 
 	/* set dcr fsize to max address */
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ