[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1552057823-10876-3-git-send-email-ludovic.Barre@st.com>
Date: Fri, 8 Mar 2019 16:10:23 +0100
From: Ludovic Barre <ludovic.Barre@...com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
CC: Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue <alexandre.torgue@...com>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
Ludovic Barre <ludovic.barre@...com>
Subject: [PATCH 2/2] ARM: dts: stm32: add jedec compatible for nor flash on stm32mp157c-ev1
From: Ludovic Barre <ludovic.barre@...com>
This patch adds jedec compatible for spi-nor flash
on stm32mp157c-ev1 (needed with new spi-mem interface).
Signed-off-by: Ludovic Barre <ludovic.barre@...com>
---
arch/arm/boot/dts/stm32mp157c-ev1.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c-ev1.dts b/arch/arm/boot/dts/stm32mp157c-ev1.dts
index 7fef155..cae88d9 100644
--- a/arch/arm/boot/dts/stm32mp157c-ev1.dts
+++ b/arch/arm/boot/dts/stm32mp157c-ev1.dts
@@ -140,6 +140,7 @@
status = "okay";
flash0: mx66l51235l@0 {
+ compatible = "jedec,spi-nor";
reg = <0>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>;
@@ -148,6 +149,7 @@
};
flash1: mx66l51235l@1 {
+ compatible = "jedec,spi-nor";
reg = <1>;
spi-rx-bus-width = <4>;
spi-max-frequency = <108000000>;
--
2.7.4
Powered by blists - more mailing lists