| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 8 Mar 2019 10:56:15 +0800
From: Baoquan He <bhe@...hat.com>
To: linux-kernel@...r.kernel.org, kirill.shutemov@...ux.intel.com
Cc: dave.hansen@...ux.intel.com, luto@...nel.org, peterz@...radead.org,
tglx@...utronix.de, mingo@...hat.com, bp@...en8.de, hpa@...or.com,
x86@...nel.org, keescook@...omium.org, thgarnie@...gle.com,
Baoquan He <bhe@...hat.com>
Subject: [PATCH v3 1/2] x86/mm/KASLR: Only build one PUD entry of area for real mode trampoline
The current code builds identity mapping for real mode treampoline by
borrowing page tables from the direct mapping section if KASLR is
enabled. It will copy present entries of the first PUD table in 4-level
paging mode, or the first P4D table in 5-level paging mode.
However, there's only a very small area under low 1 MB reserved
for real mode trampoline in reserve_real_mode(). Makes no sense
to build up so large area of mapping for it. Since the randomization
granularity in 4-level is 1 GB, and 512 GB in 5-level, only copying
one PUD entry is enough.
Hence, only copy one PUD entry of area where physical address 0
resides. And this is preparation for later changing the randomization
granularity of 5-level paging mode from 512 GB to 1 GB.
Signed-off-by: Baoquan He <bhe@...hat.com>
---
arch/x86/mm/kaslr.c | 88 +++++++++++++++++++++------------------------
1 file changed, 41 insertions(+), 47 deletions(-)
diff --git a/arch/x86/mm/kaslr.c b/arch/x86/mm/kaslr.c
index 3f452ffed7e9..8bd4192c68b9 100644
--- a/arch/x86/mm/kaslr.c
+++ b/arch/x86/mm/kaslr.c
@@ -147,74 +147,68 @@ void __init kernel_randomize_memory(void)
static void __meminit init_trampoline_pud(void)
{
- unsigned long paddr, paddr_next;
+ pud_t *pud_page_tramp, *pud, *pud_tramp;
+ p4d_t *p4d_page_tramp, *p4d, *p4d_tramp;
+ unsigned long paddr, vaddr;
pgd_t *pgd;
- pud_t *pud_page, *pud_page_tramp;
- int i;
pud_page_tramp = alloc_low_page();
+ /*
+ * There are two kinds of mapping in the handling for the same
+ * place of low 1 MB area. They are the direct mapping and the
+ * 1:1 mapping for real mode trampoline.
+ * ------------------------------------------------------------
+ * Kind Physical address Virtual address
+ * Direct mapping paddr vaddr=paddr+PAGE_OFFSET
+ * 1:1 mapping paddr paddr
+ */
paddr = 0;
- pgd = pgd_offset_k((unsigned long)__va(paddr));
- pud_page = (pud_t *) pgd_page_vaddr(*pgd);
-
- for (i = pud_index(paddr); i < PTRS_PER_PUD; i++, paddr = paddr_next) {
- pud_t *pud, *pud_tramp;
- unsigned long vaddr = (unsigned long)__va(paddr);
-
- pud_tramp = pud_page_tramp + pud_index(paddr);
- pud = pud_page + pud_index(vaddr);
- paddr_next = (paddr & PUD_MASK) + PUD_SIZE;
-
- *pud_tramp = *pud;
- }
-
- set_pgd(&trampoline_pgd_entry,
- __pgd(_KERNPG_TABLE | __pa(pud_page_tramp)));
-}
+ vaddr = (unsigned long)__va(paddr);
+ pgd = pgd_offset_k(vaddr);
-static void __meminit init_trampoline_p4d(void)
-{
- unsigned long paddr, paddr_next;
- pgd_t *pgd;
- p4d_t *p4d_page, *p4d_page_tramp;
- int i;
+ p4d = p4d_offset(pgd, vaddr);
+ pud = pud_offset(p4d, vaddr);
- p4d_page_tramp = alloc_low_page();
-
- paddr = 0;
- pgd = pgd_offset_k((unsigned long)__va(paddr));
- p4d_page = (p4d_t *) pgd_page_vaddr(*pgd);
+ pud_tramp = pud_page_tramp + pud_index(paddr);
+ *pud_tramp = *pud;
- for (i = p4d_index(paddr); i < PTRS_PER_P4D; i++, paddr = paddr_next) {
- p4d_t *p4d, *p4d_tramp;
- unsigned long vaddr = (unsigned long)__va(paddr);
+ if (pgtable_l5_enabled()) {
+ p4d_page_tramp = alloc_low_page();
p4d_tramp = p4d_page_tramp + p4d_index(paddr);
- p4d = p4d_page + p4d_index(vaddr);
- paddr_next = (paddr & P4D_MASK) + P4D_SIZE;
- *p4d_tramp = *p4d;
- }
+ set_p4d(p4d_tramp,
+ __p4d(_KERNPG_TABLE | __pa(pud_page_tramp)));
- set_pgd(&trampoline_pgd_entry,
- __pgd(_KERNPG_TABLE | __pa(p4d_page_tramp)));
+ set_pgd(&trampoline_pgd_entry,
+ __pgd(_KERNPG_TABLE | __pa(p4d_page_tramp)));
+ } else {
+ set_pgd(&trampoline_pgd_entry,
+ __pgd(_KERNPG_TABLE | __pa(pud_page_tramp)));
+ }
}
/*
- * Create PGD aligned trampoline table to allow real mode initialization
- * of additional CPUs. Consume only 1 low memory page.
+ * Real mode trampoline only occupies a small area under low 1 MB
+ * (please check codes in reserve_real_mode() for details). For
+ * APs' booting up, we just borrow as few page tables as possible
+ * from the direct physical mapping to build 1:1 mapping to cover
+ * that area. In case KASLR disabled, the 1st PGD entry of the
+ * direct mapping is copied directly. If KASLR is enabled, only
+ * copy the 1st PUD entry where physical address 0 resides since
+ * the granularity of randomization is PUD size in 4-level, and
+ * P4D size in 5-level.
+ *
+ * This consumes one low memory page in 4-level case, and extra one
+ * in 5-level.
*/
void __meminit init_trampoline(void)
{
-
if (!kaslr_memory_enabled()) {
init_trampoline_default();
return;
}
- if (pgtable_l5_enabled())
- init_trampoline_p4d();
- else
- init_trampoline_pud();
+ init_trampoline_pud();
}
--
2.17.2
Powered by blists - more mailing lists