[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAL_JsqLkyfd0Tvuxn_i-24gCReo=CNhtb65zG6xxqVYJasDZrQ@mail.gmail.com>
Date: Fri, 8 Mar 2019 14:13:10 -0600
From: Rob Herring <robh+dt@...nel.org>
To: Jagan Teki <jagan@...rulasolutions.com>
Cc: Heiko Stuebner <heiko@...ech.de>,
Mark Rutland <mark.rutland@....com>,
Tomeu Vizoso <tomeu.vizoso@...labora.com>,
devicetree@...r.kernel.org,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
"open list:ARM/Rockchip SoC..." <linux-rockchip@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Akash Gajjar <akash@...nedev.com>
Subject: Re: [PATCH] arm64: dts: rockchip: Add Nanopi NEO4 initial support
On Fri, Mar 8, 2019 at 12:12 PM Jagan Teki <jagan@...rulasolutions.com> wrote:
>
> FriendlyElec NanoPi NEO4 is known to be a revision 4 based
> NanoPi4 series of boards.
>
> Most of know peripherals are shared between Nanopi M4 vs NEO4, except
> - 1GB DDR3
> - USB Host ports
> - Missing DSI port
> - USB 2.0 Host with USB2PHY0 (no USB2PH1)
>
> Add support for it, by reusing existing rk3399-nanopi4.dtsi
>
> Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
> Signed-off-by: Akash Gajjar <akash@...nedev.com>
> ---
> .../devicetree/bindings/arm/rockchip.yaml | 1 +
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3399-nanopi-neo4.dts | 50 +++++++++++++++++++
> 3 files changed, 52 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-nanopi-neo4.dts
Reviewed-by: Rob Herring <robh@...nel.org>
Powered by blists - more mailing lists