Message-ID: <20190311233523.GA20098@tower.DHCP.thefacebook.com>
Date:   Mon, 11 Mar 2019 23:35:29 +0000
From:   Roman Gushchin <guro@...com>
To:     "Tobin C. Harding" <tobin@...nel.org>
CC:     Andrew Morton <akpm@...ux-foundation.org>,
        Christopher Lameter <cl@...ux.com>,
        Pekka Enberg <penberg@...helsinki.fi>,
        Matthew Wilcox <willy@...radead.org>,
        Tycho Andersen <tycho@...ho.ws>,
        "linux-mm@...ck.org" <linux-mm@...ck.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [RFC 09/15] slub: Enable slab defragmentation using SMO

On Fri, Mar 08, 2019 at 03:14:20PM +1100, Tobin C. Harding wrote:
> If many objects are allocated with the slab allocator and freed in an
> arbitrary order then the slab caches can become internally fragmented.
> Now that the slab allocator supports movable objects we can defragment
> any cache that has this feature enabled.
> 
> Slab defragmentation may occur:
> 
> 1. Unconditionally when __kmem_cache_shrink() is called on a slab cache
>    by the kernel calling kmem_cache_shrink().
> 
> 2. Unconditionally through the use of the slabinfo command.
> 
> 	slabinfo <cache> -s
> 
> 3. Conditionally via the use of kmem_cache_defrag()
> 
> Use SMO when shrinking cache.  Currently when the kernel calls
> kmem_cache_shrink() we curate the partial slabs list.  If object
> migration is not enabled for the cache we still do this, if however SMO
> is enabled, we attempt to move objects in partially full slabs in order
> to defragment the cache.  Shrink attempts to move all objects in order
> to reduce the cache to a single partial slab for each node.
> 
> kmem_cache_defrag() differs from shrink in that it operates dependent on
> the defrag_used_ratio and only attempts to move objects if the number of
> partial slabs exceeds MAX_PARTIAL (for each node).
> 
> Add function kmem_cache_defrag(int node).
> 
>    kmem_cache_defrag() only performs defragmentation if the usage ratio
>    of the slab is lower than the configured percentage (sysfs file added
>    in previous patch).  Fragmentation ratios are measured by calculating
>    the percentage of objects in use compared to the total number of
>    objects that the slab page can accommodate.
> 
>    The scanning of slab caches is optimized because the defragmentable
>    slabs come first on the list. Thus we can terminate scans on the
>    first slab encountered that does not support defragmentation.
> 
>    kmem_cache_defrag() takes a node parameter. This can either be -1 if
>    defragmentation should be performed on all nodes, or a node number.
> 
>    Defragmentation may be disabled by setting defrag ratio to 0
> 
> 	echo 0 > /sys/kernel/slab/<cache>/defrag_used_ratio
> 
> In order for a cache to be defragmentable the cache must support object
> migration (SMO).  Enabling SMO for a cache is done via a call to the
> recently added function:
> 
> 	void kmem_cache_setup_mobility(struct kmem_cache *,
> 				       kmem_cache_isolate_func,
> 			               kmem_cache_migrate_func);
> 
> Co-developed-by: Christoph Lameter <cl@...ux.com>
> Signed-off-by: Tobin C. Harding <tobin@...nel.org>
> ---
>  include/linux/slab.h |   1 +
>  mm/slub.c            | 266 +++++++++++++++++++++++++++++++------------
>  2 files changed, 194 insertions(+), 73 deletions(-)
> 
> diff --git a/include/linux/slab.h b/include/linux/slab.h
> index 22e87c41b8a4..b9b46bc9937e 100644
> --- a/include/linux/slab.h
> +++ b/include/linux/slab.h
> @@ -147,6 +147,7 @@ struct kmem_cache *kmem_cache_create_usercopy(const char *name,
>  			void (*ctor)(void *));
>  void kmem_cache_destroy(struct kmem_cache *);
>  int kmem_cache_shrink(struct kmem_cache *);
> +int kmem_cache_defrag(int node);
>  
>  void memcg_create_kmem_cache(struct mem_cgroup *, struct kmem_cache *);
>  void memcg_deactivate_kmem_caches(struct mem_cgroup *);
> diff --git a/mm/slub.c b/mm/slub.c
> index 515db0f36c55..53dd4cb5b5a4 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -354,6 +354,12 @@ static __always_inline void slab_lock(struct page *page)
>  	bit_spin_lock(PG_locked, &page->flags);
>  }
>  
> +static __always_inline int slab_trylock(struct page *page)
> +{
> +	VM_BUG_ON_PAGE(PageTail(page), page);
> +	return bit_spin_trylock(PG_locked, &page->flags);
> +}
> +
>  static __always_inline void slab_unlock(struct page *page)
>  {
>  	VM_BUG_ON_PAGE(PageTail(page), page);
> @@ -3959,79 +3965,6 @@ void kfree(const void *x)
>  }
>  EXPORT_SYMBOL(kfree);
>  
> -#define SHRINK_PROMOTE_MAX 32
> -
> -/*
> - * kmem_cache_shrink discards empty slabs and promotes the slabs filled
> - * up most to the head of the partial lists. New allocations will then
> - * fill those up and thus they can be removed from the partial lists.
> - *
> - * The slabs with the least items are placed last. This results in them
> - * being allocated from last increasing the chance that the last objects
> - * are freed in them.
> - */
> -int __kmem_cache_shrink(struct kmem_cache *s)
> -{
> -	int node;
> -	int i;
> -	struct kmem_cache_node *n;
> -	struct page *page;
> -	struct page *t;
> -	struct list_head discard;
> -	struct list_head promote[SHRINK_PROMOTE_MAX];
> -	unsigned long flags;
> -	int ret = 0;
> -
> -	flush_all(s);
> -	for_each_kmem_cache_node(s, node, n) {
> -		INIT_LIST_HEAD(&discard);
> -		for (i = 0; i < SHRINK_PROMOTE_MAX; i++)
> -			INIT_LIST_HEAD(promote + i);
> -
> -		spin_lock_irqsave(&n->list_lock, flags);
> -
> -		/*
> -		 * Build lists of slabs to discard or promote.
> -		 *
> -		 * Note that concurrent frees may occur while we hold the
> -		 * list_lock. page->inuse here is the upper limit.
> -		 */
> -		list_for_each_entry_safe(page, t, &n->partial, lru) {
> -			int free = page->objects - page->inuse;
> -
> -			/* Do not reread page->inuse */
> -			barrier();
> -
> -			/* We do not keep full slabs on the list */
> -			BUG_ON(free <= 0);
> -
> -			if (free == page->objects) {
> -				list_move(&page->lru, &discard);
> -				n->nr_partial--;
> -			} else if (free <= SHRINK_PROMOTE_MAX)
> -				list_move(&page->lru, promote + free - 1);
> -		}
> -
> -		/*
> -		 * Promote the slabs filled up most to the head of the
> -		 * partial list.
> -		 */
> -		for (i = SHRINK_PROMOTE_MAX - 1; i >= 0; i--)
> -			list_splice(promote + i, &n->partial);
> -
> -		spin_unlock_irqrestore(&n->list_lock, flags);
> -
> -		/* Release empty slabs */
> -		list_for_each_entry_safe(page, t, &discard, lru)
> -			discard_slab(s, page);
> -
> -		if (slabs_node(s, node))
> -			ret = 1;
> -	}
> -
> -	return ret;
> -}
> -
>  #ifdef CONFIG_MEMCG
>  static void kmemcg_cache_deact_after_rcu(struct kmem_cache *s)
>  {
> @@ -4411,6 +4344,193 @@ static void __move(struct page *page, void *scratch, int node)
>  	s->migrate(s, vector, count, node, private);
>  }
>  
> +/*
> + * __defrag() - Defragment node.
> + * @s: cache we are working on.
> + * @node: The node to move objects from.
> + * @target_node: The node to move objects to.
> + * @ratio: The defrag ratio (percentage, between 0 and 100).
> + *
> + * Release slabs with zero objects and try to call the migration function
> + * for slabs with less than the 'ratio' percentage of objects allocated.
> + *
> + * Moved objects are allocated on @target_node.
> + *
> + * Return: The number of partial slabs left on the node after the operation.
> + */
> +static unsigned long __defrag(struct kmem_cache *s, int node, int target_node,
> +			      int ratio)

Maybe kmem_cache_defrag_node()?

> +{
> +	struct kmem_cache_node *n = get_node(s, node);
> +	struct page *page, *page2;
> +	LIST_HEAD(move_list);
> +	unsigned long flags;
> +
> +	if (node == target_node && n->nr_partial <= 1) {
> +		/*
> +		 * Trying to reduce fragmentation on a node but there is
> +		 * only a single or no partial slab page. This is already
> +		 * the optimal object density that we can reach.
> +		 */
> +		return n->nr_partial;
> +	}
> +
> +	spin_lock_irqsave(&n->list_lock, flags);
> +	list_for_each_entry_safe(page, page2, &n->partial, lru) {
> +		if (!slab_trylock(page))
> +			/* Busy slab. Get out of the way */
> +			continue;
> +
> +		if (page->inuse) {
> +			if (page->inuse > ratio * page->objects / 100) {
> +				slab_unlock(page);
> +				/*
> +				 * Skip slab because the object density
> +				 * in the slab page is high enough.
> +				 */
> +				continue;
> +			}
> +
> +			list_move(&page->lru, &move_list);
> +			if (s->migrate) {
> +				/* Stop page being considered for allocations */
> +				n->nr_partial--;
> +				page->frozen = 1;
> +			}
> +			slab_unlock(page);
> +		} else {	/* Empty slab page */
> +			list_del(&page->lru);
> +			n->nr_partial--;
> +			slab_unlock(page);
> +			discard_slab(s, page);
> +		}
> +	}
> +
> +	if (!s->migrate) {
> +		/*
> +		 * No defrag method. By simply putting the zaplist at the
> +		 * end of the partial list we can let them simmer longer
> +		 * and thus increase the chance of all objects being
> +		 * reclaimed.
> +		 *
> +		 */
> +		list_splice(&move_list, n->partial.prev);
> +	}
> +
> +	spin_unlock_irqrestore(&n->list_lock, flags);
> +
> +	if (s->migrate && !list_empty(&move_list)) {
> +		void **scratch = alloc_scratch(s);
> +		struct page *page, *page2;
> +
> +		if (scratch) {
> +			/* Try to remove / move the objects left */
> +			list_for_each_entry(page, &move_list, lru) {
> +				if (page->inuse)
> +					__move(page, scratch, target_node);
> +			}
> +			kfree(scratch);
> +		}
> +
> +		/* Inspect results and dispose of pages */
> +		spin_lock_irqsave(&n->list_lock, flags);
> +		list_for_each_entry_safe(page, page2, &move_list, lru) {
> +			list_del(&page->lru);
> +			slab_lock(page);
> +			page->frozen = 0;
> +
> +			if (page->inuse) {
> +				/*
> +				 * Objects left in slab page, move it to the
> +				 * tail of the partial list to increase the
> +				 * chance that the freeing of the remaining
> +				 * objects will free the slab page.
> +				 */
> +				n->nr_partial++;
> +				list_add_tail(&page->lru, &n->partial);
> +				slab_unlock(page);
> +			} else {
> +				slab_unlock(page);
> +				discard_slab(s, page);
> +			}
> +		}
> +		spin_unlock_irqrestore(&n->list_lock, flags);
> +	}
> +
> +	return n->nr_partial;
> +}
> +
> +/**
> + * kmem_cache_defrag() - Defrag slab caches.
> + * @node: The node to defrag or -1 for all nodes.
> + *
> + * Defrag slabs conditional on the amount of fragmentation in a page.
> + */
> +int kmem_cache_defrag(int node)
> +{
> +	struct kmem_cache *s;
> +	unsigned long left = 0;
> +
> +	/*
> +	 * kmem_cache_defrag may be called from the reclaim path which may be
> +	 * called for any page allocator alloc. So there is the danger that we
> +	 * get called in a situation where slub already acquired the slub_lock
> +	 * for other purposes.
> +	 */
> +	if (!mutex_trylock(&slab_mutex))
> +		return 0;
> +
> +	list_for_each_entry(s, &slab_caches, list) {
> +		/*
> +		 * Defragmentable caches come first. If the slab cache is not
> +		 * defragmentable then we can stop traversing the list.
> +		 */
> +		if (!s->migrate)
> +			break;
> +
> +		if (node == -1) {
> +			int nid;
> +
> +			for_each_node_state(nid, N_NORMAL_MEMORY)
> +				if (s->node[nid]->nr_partial > MAX_PARTIAL)
> +					left += __defrag(s, nid, nid, s->defrag_used_ratio);
> +		} else {
> +			if (s->node[node]->nr_partial > MAX_PARTIAL)
> +				left += __defrag(s, node, node, s->defrag_used_ratio);
> +		}
> +	}
> +	mutex_unlock(&slab_mutex);
> +	return left;
> +}
> +EXPORT_SYMBOL(kmem_cache_defrag);
> +
> +/**
> + * __kmem_cache_shrink() - Shrink a cache.
> + * @s: The cache to shrink.
> + *
> + * Reduces the memory footprint of a slab cache by as much as possible.
> + *
> + * This works by:
> + *  1. Removing empty slabs from the partial list.
> + *  2. Migrating slab objects to denser slab pages if the slab cache
> + *  supports migration.  If not, reorganizing the partial list so that
> + *  more densely allocated slab pages come first.
> + *
> + * Not called directly, called by kmem_cache_shrink().
> + */
> +int __kmem_cache_shrink(struct kmem_cache *s)
> +{
> +	int node;
> +	int left = 0;

s/int/unsigned long? Or s/unsigned long/int in __defrag()?

Thanks!

Powered by blists - more mailing lists