| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1552310346-7629-41-git-send-email-info@metux.net> Date: Mon, 11 Mar 2019 14:17:52 +0100 From: "Enrico Weigelt, metux IT consult" <info@...ux.net> To: linux-kernel@...r.kernel.org Subject: [PATCH 040/114] drivers: usb: Kconfig: pedantic formatting Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@...ux.net> --- drivers/usb/Kconfig | 2 +- drivers/usb/atm/Kconfig | 2 +- drivers/usb/dwc3/Kconfig | 14 +-- drivers/usb/gadget/Kconfig | 160 +++++++++++++------------- drivers/usb/gadget/legacy/Kconfig | 48 ++++---- drivers/usb/gadget/udc/Kconfig | 234 +++++++++++++++++++------------------- drivers/usb/host/Kconfig | 120 +++++++++---------- drivers/usb/misc/Kconfig | 32 +++--- drivers/usb/serial/Kconfig | 60 +++++----- drivers/usb/wusbcore/Kconfig | 13 +-- 10 files changed, 342 insertions(+), 343 deletions(-) diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index e4b2741..14f9933 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -53,7 +53,7 @@ config USB traditional PC serial port. The bus supplies power to peripherals and allows for hot swapping. Up to 127 USB peripherals can be connected to a single USB host in a tree structure. - + The USB host is the root of the tree, the peripherals are the leaves and the inner nodes are special USB devices called hubs. Most PCs now have USB host ports, used to connect peripherals diff --git a/drivers/usb/atm/Kconfig b/drivers/usb/atm/Kconfig index 989aaa3..fbb4a2d 100644 --- a/drivers/usb/atm/Kconfig +++ b/drivers/usb/atm/Kconfig @@ -23,7 +23,7 @@ config USB_SPEEDTOUCH select FW_LOADER help Say Y here if you have an SpeedTouch USB or SpeedTouch 330 - modem. In order to use your modem you will need to install the + modem. In order to use your modem you will need to install the two parts of the firmware, extracted by the user space tools; see <http://www.linux-usb.org/SpeedTouch/> for details. diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 2b14944..a81f336f 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -96,13 +96,13 @@ config USB_DWC3_KEYSTONE Say 'Y' or 'M' here if you have one such device config USB_DWC3_OF_SIMPLE - tristate "Generic OF Simple Glue Layer" - depends on OF && COMMON_CLK - default USB_DWC3 - help - Support USB2/3 functionality in simple SoC integrations. - Currently supports Xilinx and Qualcomm DWC USB3 IP. - Say 'Y' or 'M' if you have one such device. + tristate "Generic OF Simple Glue Layer" + depends on OF && COMMON_CLK + default USB_DWC3 + help + Support USB2/3 functionality in simple SoC integrations. + Currently supports Xilinx and Qualcomm DWC USB3 IP. + Say 'Y' or 'M' if you have one such device. config USB_DWC3_ST tristate "STMicroelectronics Platforms" diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index ec189d7..587e0d1 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -19,30 +19,30 @@ menuconfig USB_GADGET select USB_COMMON select NLS help - USB is a master/slave protocol, organized with one master - host (such as a PC) controlling up to 127 peripheral devices. - The USB hardware is asymmetric, which makes it easier to set up: - you can't connect a "to-the-host" connector to a peripheral. - - Linux can run in the host, or in the peripheral. In both cases - you need a low level bus controller driver, and some software - talking to it. Peripheral controllers are often discrete silicon, - or are integrated with the CPU in a microcontroller. The more - familiar host side controllers have names like "EHCI", "OHCI", - or "UHCI", and are usually integrated into southbridges on PC - motherboards. - - Enable this configuration option if you want to run Linux inside - a USB peripheral device. Configure one hardware driver for your - peripheral/device side bus controller, and a "gadget driver" for - your peripheral protocol. (If you use modular gadget drivers, - you may configure more than one.) - - If in doubt, say "N" and don't enable these drivers; most people - don't have this kind of hardware (except maybe inside Linux PDAs). - - For more information, see <http://www.linux-usb.org/gadget> and - the kernel documentation for this API. + USB is a master/slave protocol, organized with one master + host (such as a PC) controlling up to 127 peripheral devices. + The USB hardware is asymmetric, which makes it easier to set up: + you can't connect a "to-the-host" connector to a peripheral. + + Linux can run in the host, or in the peripheral. In both cases + you need a low level bus controller driver, and some software + talking to it. Peripheral controllers are often discrete silicon, + or are integrated with the CPU in a microcontroller. The more + familiar host side controllers have names like "EHCI", "OHCI", + or "UHCI", and are usually integrated into southbridges on PC + motherboards. + + Enable this configuration option if you want to run Linux inside + a USB peripheral device. Configure one hardware driver for your + peripheral/device side bus controller, and a "gadget driver" for + your peripheral protocol. (If you use modular gadget drivers, + you may configure more than one.) + + If in doubt, say "N" and don't enable these drivers; most people + don't have this kind of hardware (except maybe inside Linux PDAs). + + For more information, see <http://www.linux-usb.org/gadget> and + the kernel documentation for this API. if USB_GADGET @@ -50,90 +50,90 @@ config USB_GADGET_DEBUG bool "Debugging messages (DEVELOPMENT)" depends on DEBUG_KERNEL help - Many controller and gadget drivers will print some debugging - messages if you use this option to ask for those messages. + Many controller and gadget drivers will print some debugging + messages if you use this option to ask for those messages. - Avoid enabling these messages, even if you're actively - debugging such a driver. Many drivers will emit so many - messages that the driver timings are affected, which will - either create new failure modes or remove the one you're - trying to track down. Never enable these messages for a - production build. + Avoid enabling these messages, even if you're actively + debugging such a driver. Many drivers will emit so many + messages that the driver timings are affected, which will + either create new failure modes or remove the one you're + trying to track down. Never enable these messages for a + production build. config USB_GADGET_VERBOSE bool "Verbose debugging Messages (DEVELOPMENT)" depends on USB_GADGET_DEBUG help - Many controller and gadget drivers will print verbose debugging - messages if you use this option to ask for those messages. + Many controller and gadget drivers will print verbose debugging + messages if you use this option to ask for those messages. - Avoid enabling these messages, even if you're actively - debugging such a driver. Many drivers will emit so many - messages that the driver timings are affected, which will - either create new failure modes or remove the one you're - trying to track down. Never enable these messages for a - production build. + Avoid enabling these messages, even if you're actively + debugging such a driver. Many drivers will emit so many + messages that the driver timings are affected, which will + either create new failure modes or remove the one you're + trying to track down. Never enable these messages for a + production build. config USB_GADGET_DEBUG_FILES bool "Debugging information files (DEVELOPMENT)" depends on PROC_FS help - Some of the drivers in the "gadget" framework can expose - debugging information in files such as /proc/driver/udc - (for a peripheral controller). The information in these - files may help when you're troubleshooting or bringing up a - driver on a new board. Enable these files by choosing "Y" - here. If in doubt, or to conserve kernel memory, say "N". + Some of the drivers in the "gadget" framework can expose + debugging information in files such as /proc/driver/udc + (for a peripheral controller). The information in these + files may help when you're troubleshooting or bringing up a + driver on a new board. Enable these files by choosing "Y" + here. If in doubt, or to conserve kernel memory, say "N". config USB_GADGET_DEBUG_FS bool "Debugging information files in debugfs (DEVELOPMENT)" depends on DEBUG_FS help - Some of the drivers in the "gadget" framework can expose - debugging information in files under /sys/kernel/debug/. - The information in these files may help when you're - troubleshooting or bringing up a driver on a new board. - Enable these files by choosing "Y" here. If in doubt, or - to conserve kernel memory, say "N". + Some of the drivers in the "gadget" framework can expose + debugging information in files under /sys/kernel/debug/. + The information in these files may help when you're + troubleshooting or bringing up a driver on a new board. + Enable these files by choosing "Y" here. If in doubt, or + to conserve kernel memory, say "N". config USB_GADGET_VBUS_DRAW int "Maximum VBUS Power usage (2-500 mA)" range 2 500 default 2 help - Some devices need to draw power from USB when they are - configured, perhaps to operate circuitry or to recharge - batteries. This is in addition to any local power supply, - such as an AC adapter or batteries. + Some devices need to draw power from USB when they are + configured, perhaps to operate circuitry or to recharge + batteries. This is in addition to any local power supply, + such as an AC adapter or batteries. - Enter the maximum power your device draws through USB, in - milliAmperes. The permitted range of values is 2 - 500 mA; - 0 mA would be legal, but can make some hosts misbehave. + Enter the maximum power your device draws through USB, in + milliAmperes. The permitted range of values is 2 - 500 mA; + 0 mA would be legal, but can make some hosts misbehave. - This value will be used except for system-specific gadget - drivers that have more specific information. + This value will be used except for system-specific gadget + drivers that have more specific information. config USB_GADGET_STORAGE_NUM_BUFFERS int "Number of storage pipeline buffers" range 2 256 default 2 help - Usually 2 buffers are enough to establish a good buffering - pipeline. The number may be increased in order to compensate - for a bursty VFS behaviour. For instance there may be CPU wake up - latencies that makes the VFS to appear bursty in a system with - an CPU on-demand governor. Especially if DMA is doing IO to - offload the CPU. In this case the CPU will go into power - save often and spin up occasionally to move data within VFS. - If selecting USB_GADGET_DEBUG_FILES this value may be set by - a module parameter as well. - If unsure, say 2. + Usually 2 buffers are enough to establish a good buffering + pipeline. The number may be increased in order to compensate + for a bursty VFS behaviour. For instance there may be CPU wake up + latencies that makes the VFS to appear bursty in a system with + an CPU on-demand governor. Especially if DMA is doing IO to + offload the CPU. In this case the CPU will go into power + save often and spin up occasionally to move data within VFS. + If selecting USB_GADGET_DEBUG_FILES this value may be set by + a module parameter as well. + If unsure, say 2. config U_SERIAL_CONSOLE bool "Serial gadget console support" depends on USB_U_SERIAL help - It supports the serial gadget can be used as a console. + It supports the serial gadget can be used as a console. source "drivers/usb/gadget/udc/Kconfig" @@ -299,14 +299,14 @@ config USB_CONFIGFS_RNDIS select USB_U_ETHER select USB_F_RNDIS help - Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, - and Microsoft provides redistributable binary RNDIS drivers for - older versions of Windows. - - To make MS-Windows work with this, use Documentation/usb/linux.inf - as the "driver info file". For versions of MS-Windows older than - XP, you'll need to download drivers from Microsoft's website; a URL - is given in comments found in that info file. + Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, + and Microsoft provides redistributable binary RNDIS drivers for + older versions of Windows. + + To make MS-Windows work with this, use Documentation/usb/linux.inf + as the "driver info file". For versions of MS-Windows older than + XP, you'll need to download drivers from Microsoft's website; a URL + is given in comments found in that info file. config USB_CONFIGFS_EEM bool "Ethernet Emulation Model (EEM)" diff --git a/drivers/usb/gadget/legacy/Kconfig b/drivers/usb/gadget/legacy/Kconfig index d7c9e4f..b282781 100644 --- a/drivers/usb/gadget/legacy/Kconfig +++ b/drivers/usb/gadget/legacy/Kconfig @@ -135,36 +135,36 @@ config USB_ETH_RNDIS select USB_F_RNDIS default y help - Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, - and Microsoft provides redistributable binary RNDIS drivers for - older versions of Windows. + Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, + and Microsoft provides redistributable binary RNDIS drivers for + older versions of Windows. - If you say "y" here, the Ethernet gadget driver will try to provide - a second device configuration, supporting RNDIS to talk to such - Microsoft USB hosts. + If you say "y" here, the Ethernet gadget driver will try to provide + a second device configuration, supporting RNDIS to talk to such + Microsoft USB hosts. - To make MS-Windows work with this, use Documentation/usb/linux.inf - as the "driver info file". For versions of MS-Windows older than - XP, you'll need to download drivers from Microsoft's website; a URL - is given in comments found in that info file. + To make MS-Windows work with this, use Documentation/usb/linux.inf + as the "driver info file". For versions of MS-Windows older than + XP, you'll need to download drivers from Microsoft's website; a URL + is given in comments found in that info file. config USB_ETH_EEM - bool "Ethernet Emulation Model (EEM) support" - depends on USB_ETH + bool "Ethernet Emulation Model (EEM) support" + depends on USB_ETH select USB_LIBCOMPOSITE select USB_F_EEM - default n - help - CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM - and therefore can be supported by more hardware. Technically ECM and - EEM are designed for different applications. The ECM model extends - the network interface to the target (e.g. a USB cable modem), and the - EEM model is for mobile devices to communicate with hosts using - ethernet over USB. For Linux gadgets, however, the interface with - the host is the same (a usbX device), so the differences are minimal. - - If you say "y" here, the Ethernet gadget driver will use the EEM - protocol rather than ECM. If unsure, say "n". + default n + help + CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM + and therefore can be supported by more hardware. Technically ECM and + EEM are designed for different applications. The ECM model extends + the network interface to the target (e.g. a USB cable modem), and the + EEM model is for mobile devices to communicate with hosts using + ethernet over USB. For Linux gadgets, however, the interface with + the host is the same (a usbX device), so the differences are minimal. + + If you say "y" here, the Ethernet gadget driver will use the EEM + protocol rather than ECM. If unsure, say "n". config USB_G_NCM tristate "Network Control Model (NCM) support" diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index ef0259a..b316dda 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -35,24 +35,24 @@ config USB_AT91 depends on ARCH_AT91 depends on OF || COMPILE_TEST help - Many Atmel AT91 processors (such as the AT91RM2000) have a - full speed USB Device Port with support for five configurable - endpoints (plus endpoint zero). + Many Atmel AT91 processors (such as the AT91RM2000) have a + full speed USB Device Port with support for five configurable + endpoints (plus endpoint zero). - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "at91_udc" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "at91_udc" and force all + gadget drivers to also be dynamically linked. config USB_LPC32XX tristate "LPC32XX USB Peripheral Controller" depends on ARCH_LPC32XX && I2C select USB_ISP1301 help - This option selects the USB device controller in the LPC32xx SoC. + This option selects the USB device controller in the LPC32xx SoC. - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "lpc32xx_udc" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "lpc32xx_udc" and force all + gadget drivers to also be dynamically linked. config USB_ATMEL_USBA tristate "Atmel USBA" @@ -80,49 +80,49 @@ config USB_BCM63XX_UDC tristate "Broadcom BCM63xx Peripheral Controller" depends on BCM63XX help - Many Broadcom BCM63xx chipsets (such as the BCM6328) have a - high speed USB Device Port with support for four fixed endpoints - (plus endpoint zero). + Many Broadcom BCM63xx chipsets (such as the BCM6328) have a + high speed USB Device Port with support for four fixed endpoints + (plus endpoint zero). - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "bcm63xx_udc". + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "bcm63xx_udc". config USB_FSL_USB2 tristate "Freescale Highspeed USB DR Peripheral Controller" depends on FSL_SOC || ARCH_MXC help - Some of Freescale PowerPC and i.MX processors have a High Speed - Dual-Role(DR) USB controller, which supports device mode. + Some of Freescale PowerPC and i.MX processors have a High Speed + Dual-Role(DR) USB controller, which supports device mode. - The number of programmable endpoints is different through - SOC revisions. + The number of programmable endpoints is different through + SOC revisions. - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "fsl_usb2_udc" and force - all gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "fsl_usb2_udc" and force + all gadget drivers to also be dynamically linked. config USB_FUSB300 tristate "Faraday FUSB300 USB Peripheral Controller" depends on !PHYS_ADDR_T_64BIT && HAS_DMA help - Faraday usb device controller FUSB300 driver + Faraday usb device controller FUSB300 driver config USB_FOTG210_UDC depends on HAS_DMA tristate "Faraday FOTG210 USB Peripheral Controller" help - Faraday USB2.0 OTG controller which can be configured as - high speed or full speed USB device. This driver supppors - Bulk Transfer so far. + Faraday USB2.0 OTG controller which can be configured as + high speed or full speed USB device. This driver supppors + Bulk Transfer so far. - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "fotg210_udc". + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "fotg210_udc". config USB_GR_UDC - tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver" - depends on HAS_DMA - help - Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB + tristate "Aeroflex Gaisler GRUSBDC USB Peripheral Controller Driver" + depends on HAS_DMA + help + Select this to support Aeroflex Gaisler GRUSBDC cores from the GRLIB VHDL IP core library. config USB_OMAP @@ -130,31 +130,31 @@ config USB_OMAP depends on ARCH_OMAP1 depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3) help - Many Texas Instruments OMAP processors have flexible full - speed USB device controllers, with support for up to 30 - endpoints (plus endpoint zero). This driver supports the - controller in the OMAP 1611, and should work with controllers - in other OMAP processors too, given minor tweaks. + Many Texas Instruments OMAP processors have flexible full + speed USB device controllers, with support for up to 30 + endpoints (plus endpoint zero). This driver supports the + controller in the OMAP 1611, and should work with controllers + in other OMAP processors too, given minor tweaks. - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "omap_udc" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "omap_udc" and force all + gadget drivers to also be dynamically linked. config USB_PXA25X tristate "PXA 25x or IXP 4xx" depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX depends on HAS_IOMEM help - Intel's PXA 25x series XScale ARM-5TE processors include - an integrated full speed USB 1.1 device controller. The - controller in the IXP 4xx series is register-compatible. + Intel's PXA 25x series XScale ARM-5TE processors include + an integrated full speed USB 1.1 device controller. The + controller in the IXP 4xx series is register-compatible. - It has fifteen fixed-function endpoints, as well as endpoint - zero (for control transfers). + It has fifteen fixed-function endpoints, as well as endpoint + zero (for control transfers). - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "pxa25x_udc" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "pxa25x_udc" and force all + gadget drivers to also be dynamically linked. # if there's only one gadget driver, using only two bulk endpoints, # don't waste memory for the other endpoints @@ -170,25 +170,25 @@ config USB_R8A66597 tristate "Renesas R8A66597 USB Peripheral Controller" depends on HAS_DMA help - R8A66597 is a discrete USB host and peripheral controller chip that - supports both full and high speed USB 2.0 data transfers. - It has nine configurable endpoints, and endpoint zero. + R8A66597 is a discrete USB host and peripheral controller chip that + supports both full and high speed USB 2.0 data transfers. + It has nine configurable endpoints, and endpoint zero. - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "r8a66597_udc" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "r8a66597_udc" and force all + gadget drivers to also be dynamically linked. config USB_RENESAS_USBHS_UDC tristate 'Renesas USBHS controller' depends on USB_RENESAS_USBHS help - Renesas USBHS is a discrete USB host and peripheral controller chip - that supports both full and high speed USB 2.0 data transfers. - It has nine or more configurable endpoints, and endpoint zero. + Renesas USBHS is a discrete USB host and peripheral controller chip + that supports both full and high speed USB 2.0 data transfers. + It has nine or more configurable endpoints, and endpoint zero. - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "renesas_usbhs" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "renesas_usbhs" and force all + gadget drivers to also be dynamically linked. config USB_RENESAS_USB3 tristate 'Renesas USB3.0 Peripheral controller' @@ -196,26 +196,26 @@ config USB_RENESAS_USB3 depends on EXTCON select USB_ROLE_SWITCH help - Renesas USB3.0 Peripheral controller is a USB peripheral controller - that supports super, high, and full speed USB 3.0 data transfers. + Renesas USB3.0 Peripheral controller is a USB peripheral controller + that supports super, high, and full speed USB 3.0 data transfers. - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "renesas_usb3" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "renesas_usb3" and force all + gadget drivers to also be dynamically linked. config USB_PXA27X tristate "PXA 27x" depends on HAS_IOMEM help - Intel's PXA 27x series XScale ARM v5TE processors include - an integrated full speed USB 1.1 device controller. + Intel's PXA 27x series XScale ARM v5TE processors include + an integrated full speed USB 1.1 device controller. - It has up to 23 endpoints, as well as endpoint zero (for - control transfers). + It has up to 23 endpoints, as well as endpoint zero (for + control transfers). - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "pxa27x_udc" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "pxa27x_udc" and force all + gadget drivers to also be dynamically linked. config USB_S3C2410 tristate "S3C2410 USB Device Controller" @@ -294,13 +294,13 @@ config USB_M66592 tristate "Renesas M66592 USB Peripheral Controller" depends on HAS_IOMEM help - M66592 is a discrete USB peripheral controller chip that - supports both full and high speed USB 2.0 data transfers. - It has seven configurable endpoints, and endpoint zero. + M66592 is a discrete USB peripheral controller chip that + supports both full and high speed USB 2.0 data transfers. + It has seven configurable endpoints, and endpoint zero. - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "m66592_udc" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "m66592_udc" and force all + gadget drivers to also be dynamically linked. source "drivers/usb/gadget/udc/bdc/Kconfig" @@ -313,31 +313,31 @@ config USB_AMD5536UDC depends on USB_PCI select USB_SNP_CORE help - The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. - It is a USB Highspeed DMA capable USB device controller. Beside ep0 - it provides 4 IN and 4 OUT endpoints (bulk or interrupt type). - The UDC port supports OTG operation, and may be used as a host port - if it's not being used to implement peripheral or OTG roles. + The AMD5536 UDC is part of the AMD Geode CS5536, an x86 southbridge. + It is a USB Highspeed DMA capable USB device controller. Beside ep0 + it provides 4 IN and 4 OUT endpoints (bulk or interrupt type). + The UDC port supports OTG operation, and may be used as a host port + if it's not being used to implement peripheral or OTG roles. - This UDC is based on Synopsys USB device controller IP and selects - CONFIG_USB_SNP_CORE option to build the core driver. + This UDC is based on Synopsys USB device controller IP and selects + CONFIG_USB_SNP_CORE option to build the core driver. - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "amd5536udc" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "amd5536udc" and force all + gadget drivers to also be dynamically linked. config USB_FSL_QE tristate "Freescale QE/CPM USB Device Controller" depends on FSL_SOC && (QUICC_ENGINE || CPM) help - Some of Freescale PowerPC processors have a Full Speed - QE/CPM2 USB controller, which support device mode with 4 - programmable endpoints. This driver supports the - controller in the MPC8360 and MPC8272, and should work with - controllers having QE or CPM2, given minor tweaks. + Some of Freescale PowerPC processors have a Full Speed + QE/CPM2 USB controller, which support device mode with 4 + programmable endpoints. This driver supports the + controller in the MPC8360 and MPC8272, and should work with + controllers having QE or CPM2, given minor tweaks. - Set CONFIG_USB_GADGET to "m" to build this driver as a - dynamically linked module called "fsl_qe_udc". + Set CONFIG_USB_GADGET to "m" to build this driver as a + dynamically linked module called "fsl_qe_udc". config USB_NET2272 depends on HAS_IOMEM @@ -366,40 +366,40 @@ config USB_NET2280 tristate "NetChip NET228x / PLX USB3x8x" depends on USB_PCI help - NetChip 2280 / 2282 is a PCI based USB peripheral controller which - supports both full and high speed USB 2.0 data transfers. + NetChip 2280 / 2282 is a PCI based USB peripheral controller which + supports both full and high speed USB 2.0 data transfers. - It has six configurable endpoints, as well as endpoint zero - (for control transfers) and several endpoints with dedicated - functions. + It has six configurable endpoints, as well as endpoint zero + (for control transfers) and several endpoints with dedicated + functions. - PLX 2380 is a PCIe version of the PLX 2380. + PLX 2380 is a PCIe version of the PLX 2380. - PLX 3380 / 3382 is a PCIe based USB peripheral controller which - supports full, high speed USB 2.0 and super speed USB 3.0 - data transfers. + PLX 3380 / 3382 is a PCIe based USB peripheral controller which + supports full, high speed USB 2.0 and super speed USB 3.0 + data transfers. - It has eight configurable endpoints, as well as endpoint zero - (for control transfers) and several endpoints with dedicated - functions. + It has eight configurable endpoints, as well as endpoint zero + (for control transfers) and several endpoints with dedicated + functions. - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "net2280" and force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "net2280" and force all + gadget drivers to also be dynamically linked. config USB_GOKU tristate "Toshiba TC86C001 'Goku-S'" depends on USB_PCI help - The Toshiba TC86C001 is a PCI device which includes controllers - for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). + The Toshiba TC86C001 is a PCI device which includes controllers + for full speed USB devices, IDE, I2C, SIO, plus a USB host (OHCI). - The device controller has three configurable (bulk or interrupt) - endpoints, plus endpoint zero (for control transfers). + The device controller has three configurable (bulk or interrupt) + endpoints, plus endpoint zero (for control transfers). - Say "y" to link the driver statically, or "m" to build a - dynamically linked module called "goku_udc" and to force all - gadget drivers to also be dynamically linked. + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "goku_udc" and to force all + gadget drivers to also be dynamically linked. config USB_EG20T tristate "Intel QUARK X1000/EG20T PCH/LAPIS Semiconductor IOH(ML7213/ML7831) UDC" diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index d809671..cddd68e 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -38,9 +38,9 @@ config USB_XHCI_DBGCAP before enabling this option. If unsure, say 'N'. config USB_XHCI_PCI - tristate - depends on USB_PCI - default y + tristate + depends on USB_PCI + default y config USB_XHCI_PLATFORM tristate "Generic xHCI driver for a platform device" @@ -165,8 +165,8 @@ config USB_EHCI_HCD_PMC_MSP select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO ---help--- - Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's. - If unsure, say N. + Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's. + If unsure, say N. config XPS_USB_HCD_XILINX bool "Use Xilinx usb host EHCI controller core" @@ -174,10 +174,10 @@ config XPS_USB_HCD_XILINX select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO ---help--- - Xilinx xps USB host controller core is EHCI compliant and has - transaction translator built-in. It can be configured to either - support both high speed and full speed devices, or high speed - devices only. + Xilinx xps USB host controller core is EHCI compliant and has + transaction translator built-in. It can be configured to either + support both high speed and full speed devices, or high speed + devices only. config USB_EHCI_FSL tristate "Support for Freescale on-chip EHCI USB controller" @@ -221,12 +221,12 @@ config USB_EHCI_HCD_ORION Marvell PXA/MMP USB controller" for those. config USB_EHCI_HCD_SPEAR - tristate "Support for ST SPEAr on-chip EHCI USB controller" - depends on USB_EHCI_HCD && PLAT_SPEAR - default y - ---help--- - Enables support for the on-chip EHCI controller on - ST SPEAr chips. + tristate "Support for ST SPEAr on-chip EHCI USB controller" + depends on USB_EHCI_HCD && PLAT_SPEAR + default y + ---help--- + Enables support for the on-chip EHCI controller on + ST SPEAr chips. config USB_EHCI_HCD_STI tristate "Support for ST STiHxxx on-chip EHCI USB controller" @@ -238,21 +238,21 @@ config USB_EHCI_HCD_STI STMicroelectronics consumer electronics SoC's. config USB_EHCI_HCD_AT91 - tristate "Support for Atmel on-chip EHCI USB controller" - depends on USB_EHCI_HCD && ARCH_AT91 - default y - ---help--- - Enables support for the on-chip EHCI controller on - Atmel chips. + tristate "Support for Atmel on-chip EHCI USB controller" + depends on USB_EHCI_HCD && ARCH_AT91 + default y + ---help--- + Enables support for the on-chip EHCI controller on + Atmel chips. config USB_EHCI_TEGRA - tristate "NVIDIA Tegra HCD support" - depends on ARCH_TEGRA - select USB_EHCI_ROOT_HUB_TT - select USB_TEGRA_PHY - help - This driver enables support for the internal USB Host Controllers - found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. + tristate "NVIDIA Tegra HCD support" + depends on ARCH_TEGRA + select USB_EHCI_ROOT_HUB_TT + select USB_TEGRA_PHY + help + This driver enables support for the internal USB Host Controllers + found in NVIDIA Tegra SoCs. The controllers are EHCI compliant. config USB_EHCI_HCD_PPC_OF bool "EHCI support for PPC USB controller on OF platform bus" @@ -270,10 +270,10 @@ config USB_EHCI_SH If you use the PCI EHCI controller, this option is not necessary. config USB_EHCI_EXYNOS - tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" - depends on ARCH_S5PV210 || ARCH_EXYNOS - help - Enable support for the Samsung Exynos SOC's on-chip EHCI controller. + tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" + depends on ARCH_S5PV210 || ARCH_EXYNOS + help + Enable support for the Samsung Exynos SOC's on-chip EHCI controller. config USB_EHCI_MV tristate "EHCI support for Marvell PXA/MMP USB controller" @@ -418,12 +418,12 @@ config USB_OHCI_HCD_OMAP1 Enables support for the OHCI controller on OMAP1/2 chips. config USB_OHCI_HCD_SPEAR - tristate "Support for ST SPEAr on-chip OHCI USB controller" - depends on USB_OHCI_HCD && PLAT_SPEAR - default y - ---help--- - Enables support for the on-chip OHCI controller on - ST SPEAr chips. + tristate "Support for ST SPEAr on-chip OHCI USB controller" + depends on USB_OHCI_HCD && PLAT_SPEAR + default y + ---help--- + Enables support for the on-chip OHCI controller on + ST SPEAr chips. config USB_OHCI_HCD_STI tristate "Support for ST STiHxxx on-chip OHCI USB controller" @@ -435,12 +435,12 @@ config USB_OHCI_HCD_STI STMicroelectronics consumer electronics SoC's. config USB_OHCI_HCD_S3C2410 - tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" - depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) - default y - ---help--- - Enables support for the on-chip OHCI controller on - S3C24xx/S3C64xx chips. + tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series" + depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX) + default y + ---help--- + Enables support for the on-chip OHCI controller on + S3C24xx/S3C64xx chips. config USB_OHCI_HCD_LPC32XX tristate "Support for LPC on-chip OHCI USB controller" @@ -448,8 +448,8 @@ config USB_OHCI_HCD_LPC32XX depends on USB_ISP1301 default y ---help--- - Enables support for the on-chip OHCI controller on - NXP chips. + Enables support for the on-chip OHCI controller on + NXP chips. config USB_OHCI_HCD_PXA27X tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller" @@ -464,8 +464,8 @@ config USB_OHCI_HCD_AT91 depends on USB_OHCI_HCD && ARCH_AT91 && OF default y ---help--- - Enables support for the on-chip OHCI controller on - Atmel chips. + Enables support for the on-chip OHCI controller on + Atmel chips. config USB_OHCI_HCD_OMAP3 tristate "OHCI support for OMAP3 and later chips" @@ -554,7 +554,7 @@ config USB_OHCI_EXYNOS tristate "OHCI support for Samsung S5P/EXYNOS SoC Series" depends on ARCH_S5PV210 || ARCH_EXYNOS help - Enable support for the Samsung Exynos SOC's on-chip OHCI controller. + Enable support for the Samsung Exynos SOC's on-chip OHCI controller. config USB_CNS3XXX_OHCI bool "Cavium CNS3XXX OHCI Module (DEPRECATED)" @@ -619,8 +619,8 @@ config USB_UHCI_PLATFORM default y if (ARCH_VT8500 || ARCH_ASPEED) config USB_UHCI_ASPEED - bool - default y if ARCH_ASPEED + bool + default y if ARCH_ASPEED config USB_FHCI_HCD tristate "Freescale QE USB Host Controller support" @@ -672,7 +672,7 @@ config USB_SL811_HCD help The SL811HS is a single-port USB controller that supports either host side or peripheral side roles. Enable this option if your - board has this chip, and you want to use it as a host controller. + board has this chip, and you want to use it as a host controller. If unsure, say N. To compile this driver as a module, choose M here: the @@ -749,14 +749,14 @@ config USB_HWA_HCD will be called "hwa-hc". config USB_IMX21_HCD - tristate "i.MX21 HCD support" - depends on ARM && ARCH_MXC - help - This driver enables support for the on-chip USB host in the - i.MX21 processor. - - To compile this driver as a module, choose M here: the - module will be called "imx21-hcd". + tristate "i.MX21 HCD support" + depends on ARM && ARCH_MXC + help + This driver enables support for the on-chip USB host in the + i.MX21 processor. + + To compile this driver as a module, choose M here: the + module will be called "imx21-hcd". config USB_HCD_BCMA tristate "BCMA usb host driver" diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index be04c11..9978866 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -99,7 +99,7 @@ config USB_CYTHERM Say Y here if you want to connect a Cypress USB thermometer device to your computer's USB port. This device is also known as the Cypress USB Starter kit or demo board. The Elektor - magazine published a modified version of this device in issue + magazine published a modified version of this device in issue #291. To compile this driver as a module, choose M here: the @@ -173,10 +173,10 @@ config USB_IOWARRIOR help Say Y here if you want to support the IO Warrior devices from Code Mercenaries. This includes support for the following devices: - IO Warrior 40 - IO Warrior 24 - IO Warrior 56 - IO Warrior 24 Power Vampire + IO Warrior 40 + IO Warrior 24 + IO Warrior 56 + IO Warrior 24 Power Vampire To compile this driver as a module, choose M here: the module will be called iowarrior. @@ -192,8 +192,8 @@ config USB_TEST including sample test device firmware and "how to use it". config USB_EHSET_TEST_FIXTURE - tristate "USB EHSET Test Fixture driver" - help + tristate "USB EHSET Test Fixture driver" + help Say Y here if you want to support the special test fixture device used for the USB-IF Embedded Host High-Speed Electrical Test procedure. @@ -244,17 +244,17 @@ config USB_HUB_USB251XB Say Y or M here if you need to configure such a device via SMBus. config USB_HSIC_USB3503 - tristate "USB3503 HSIC to USB20 Driver" - depends on I2C - select REGMAP_I2C - help - This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. + tristate "USB3503 HSIC to USB20 Driver" + depends on I2C + select REGMAP_I2C + help + This option enables support for SMSC USB3503 HSIC to USB 2.0 Driver. config USB_HSIC_USB4604 - tristate "USB4604 HSIC to USB20 Driver" - depends on I2C - help - This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. + tristate "USB4604 HSIC to USB20 Driver" + depends on I2C + help + This option enables support for SMSC USB4604 HSIC to USB 2.0 Driver. config USB_LINK_LAYER_TEST tristate "USB Link Layer Test driver" diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 7d03191..b8d316b 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -78,10 +78,10 @@ config USB_SERIAL_SIMPLE config USB_SERIAL_AIRCABLE tristate "USB AIRcable Bluetooth Dongle Driver" help - Say Y here if you want to use USB AIRcable Bluetooth Dongle. + Say Y here if you want to use USB AIRcable Bluetooth Dongle. - To compile this driver as a module, choose M here: the module - will be called aircable. + To compile this driver as a module, choose M here: the module + will be called aircable. config USB_SERIAL_ARK3116 tristate "USB ARK Micro 3116 USB Serial Driver" @@ -269,19 +269,19 @@ config USB_SERIAL_F8153X config USB_SERIAL_GARMIN - tristate "USB Garmin GPS driver" - help - Say Y here if you want to connect to your Garmin GPS. - Should work with most Garmin GPS devices which have a native USB port. + tristate "USB Garmin GPS driver" + help + Say Y here if you want to connect to your Garmin GPS. + Should work with most Garmin GPS devices which have a native USB port. - See <http://sourceforge.net/projects/garmin-gps> for the latest - version of the driver. + See <http://sourceforge.net/projects/garmin-gps> for the latest + version of the driver. - To compile this driver as a module, choose M here: the - module will be called garmin_gps. + To compile this driver as a module, choose M here: the + module will be called garmin_gps. config USB_SERIAL_IPW - tristate "USB IPWireless (3G UMTS TDD) Driver" + tristate "USB IPWireless (3G UMTS TDD) Driver" select USB_SERIAL_WWAN help Say Y here if you want to use a IPWireless USB modem such as @@ -341,20 +341,20 @@ config USB_SERIAL_KLSI module will be called kl5kusb105. config USB_SERIAL_KOBIL_SCT - tristate "USB KOBIL chipcard reader" - ---help--- - Say Y here if you want to use one of the following KOBIL USB chipcard - readers: - - - USB TWIN - - KAAN Standard Plus - - KAAN SIM - - SecOVID Reader Plus - - B1 Professional - - KAAN Professional - - Note that you need a current CT-API. - To compile this driver as a module, choose M here: the + tristate "USB KOBIL chipcard reader" + ---help--- + Say Y here if you want to use one of the following KOBIL USB chipcard + readers: + + - USB TWIN + - KAAN Standard Plus + - KAAN SIM + - SecOVID Reader Plus + - B1 Professional + - KAAN Professional + + Note that you need a current CT-API. + To compile this driver as a module, choose M here: the module will be called kobil_sct. config USB_SERIAL_MCT_U232 @@ -392,9 +392,9 @@ config USB_SERIAL_MOS7715_PARPORT depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720 select PARPORT_NOT_PC ---help--- - Say Y if you have a Moschip 7715 device and would like to use - the parallel port it provides. The port will register with - the parport subsystem as a low-level driver. + Say Y if you have a Moschip 7715 device and would like to use + the parallel port it provides. The port will register with + the parport subsystem as a low-level driver. config USB_SERIAL_MOS7840 tristate "USB Moschip 7840/7820 USB Serial Driver" @@ -458,7 +458,7 @@ config USB_SERIAL_OTI6858 tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller" help Say Y here if you want to use the OTi-6858 single port USB to serial - converter device. + converter device. To compile this driver as a module, choose M here: the module will be called oti6858. diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig index 12e8918..6de5660 100644 --- a/drivers/usb/wusbcore/Kconfig +++ b/drivers/usb/wusbcore/Kconfig @@ -5,15 +5,15 @@ config USB_WUSB tristate "Enable Wireless USB extensions" depends on UWB - select CRYPTO - select CRYPTO_BLKCIPHER - select CRYPTO_CBC - select CRYPTO_MANAGER - select CRYPTO_AES + select CRYPTO + select CRYPTO_BLKCIPHER + select CRYPTO_CBC + select CRYPTO_MANAGER + select CRYPTO_AES help Enable the host-side support for Wireless USB. - To compile this support select Y (built in). It is safe to + To compile this support select Y (built in). It is safe to select even if you don't have the hardware. config USB_WUSB_CBAF @@ -37,4 +37,3 @@ config USB_WUSB_CBAF_DEBUG Say Y here if you want the CBA to produce a bunch of debug messages to the system log. Select this if you are having a problem with CBA support and want to see more of what is going on. - -- 1.9.1
Powered by blists - more mailing lists