| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1552310346-7629-61-git-send-email-info@metux.net> Date: Mon, 11 Mar 2019 14:18:12 +0100 From: "Enrico Weigelt, metux IT consult" <info@...ux.net> To: linux-kernel@...r.kernel.org Subject: [PATCH 060/114] drivers: pci: Kconfig: pedantic formatting Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@...ux.net> --- drivers/pci/Kconfig | 40 +++++++++++++++++----------------- drivers/pci/controller/Kconfig | 14 ++++++------ drivers/pci/controller/dwc/Kconfig | 6 ++--- drivers/pci/endpoint/Kconfig | 20 ++++++++--------- drivers/pci/endpoint/functions/Kconfig | 6 ++--- drivers/pci/hotplug/Kconfig | 2 +- drivers/pci/switch/Kconfig | 10 ++++----- 7 files changed, 49 insertions(+), 49 deletions(-) diff --git a/drivers/pci/Kconfig b/drivers/pci/Kconfig index 2ab9240..cf27052 100644 --- a/drivers/pci/Kconfig +++ b/drivers/pci/Kconfig @@ -40,16 +40,16 @@ config PCI_MSI bool "Message Signaled Interrupts (MSI and MSI-X)" select GENERIC_MSI_IRQ help - This allows device drivers to enable MSI (Message Signaled - Interrupts). Message Signaled Interrupts enable a device to - generate an interrupt using an inbound Memory Write on its - PCI bus instead of asserting a device IRQ pin. + This allows device drivers to enable MSI (Message Signaled + Interrupts). Message Signaled Interrupts enable a device to + generate an interrupt using an inbound Memory Write on its + PCI bus instead of asserting a device IRQ pin. - Use of PCI MSI interrupts can be disabled at kernel boot time - by using the 'pci=nomsi' option. This disables MSI for the - entire system. + Use of PCI MSI interrupts can be disabled at kernel boot time + by using the 'pci=nomsi' option. This disables MSI for the + entire system. - If you don't know what to do here, say Y. + If you don't know what to do here, say Y. config PCI_MSI_IRQ_DOMAIN def_bool ARC || ARM || ARM64 || X86 @@ -106,14 +106,14 @@ config PCI_PF_STUB When in doubt, say N. config XEN_PCIDEV_FRONTEND - tristate "Xen PCI Frontend" - depends on X86 && XEN - select PCI_XEN + tristate "Xen PCI Frontend" + depends on X86 && XEN + select PCI_XEN select XEN_XENBUS_FRONTEND - default y - help - The PCI device frontend driver allows the kernel to import arbitrary - PCI devices from a PCI backend to support PCI driver domains. + default y + help + The PCI device frontend driver allows the kernel to import arbitrary + PCI devices from a PCI backend to support PCI driver domains. config PCI_ATS bool @@ -180,11 +180,11 @@ config PCI_LABEL select NLS config PCI_HYPERV - tristate "Hyper-V PCI Frontend" - depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64 - help - The PCI device frontend driver allows the kernel to import arbitrary - PCI devices from a PCI backend to support PCI driver domains. + tristate "Hyper-V PCI Frontend" + depends on X86 && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && X86_64 + help + The PCI device frontend driver allows the kernel to import arbitrary + PCI devices from a PCI backend to support PCI driver domains. source "drivers/pci/hotplug/Kconfig" source "drivers/pci/controller/Kconfig" diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig index 6012f30..cf262b8 100644 --- a/drivers/pci/controller/Kconfig +++ b/drivers/pci/controller/Kconfig @@ -18,9 +18,9 @@ config PCI_AARDVARK depends on PCI_MSI_IRQ_DOMAIN select PCI_BRIDGE_EMUL help - Add support for Aardvark 64bit PCIe Host Controller. This - controller is part of the South Bridge of the Marvel Armada - 3700 SoC. + Add support for Aardvark 64bit PCIe Host Controller. This + controller is part of the South Bridge of the Marvel Armada + 3700 SoC. menu "Cadence PCIe controllers support" @@ -55,10 +55,10 @@ config PCIE_XILINX_NWL depends on ARCH_ZYNQMP || COMPILE_TEST depends on PCI_MSI_IRQ_DOMAIN help - Say 'Y' here if you want kernel support for Xilinx - NWL PCIe controller. The controller can act as Root Port - or End Point. The current option selection will only - support root port enabling. + Say 'Y' here if you want kernel support for Xilinx + NWL PCIe controller. The controller can act as Root Port + or End Point. The current option selection will only + support root port enabling. config PCI_FTPCI100 bool "Faraday Technology FTPCI100 PCI controller" diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig index 6ea74b1..5312377 100644 --- a/drivers/pci/controller/dwc/Kconfig +++ b/drivers/pci/controller/dwc/Kconfig @@ -7,9 +7,9 @@ config PCIE_DW bool config PCIE_DW_HOST - bool + bool depends on PCI_MSI_IRQ_DOMAIN - select PCIE_DW + select PCIE_DW config PCIE_DW_EP bool @@ -191,7 +191,7 @@ config PCIE_HISI_STB depends on PCI_MSI_IRQ_DOMAIN select PCIE_DW_HOST help - Say Y here if you want PCIe controller support on HiSilicon STB SoCs + Say Y here if you want PCIe controller support on HiSilicon STB SoCs config PCI_MESON bool "MESON PCIe controller" diff --git a/drivers/pci/endpoint/Kconfig b/drivers/pci/endpoint/Kconfig index 17bbdc9..5cd41e8 100644 --- a/drivers/pci/endpoint/Kconfig +++ b/drivers/pci/endpoint/Kconfig @@ -9,24 +9,24 @@ config PCI_ENDPOINT bool "PCI Endpoint Support" depends on HAVE_PCI help - Enable this configuration option to support configurable PCI - endpoint. This should be enabled if the platform has a PCI - controller that can operate in endpoint mode. + Enable this configuration option to support configurable PCI + endpoint. This should be enabled if the platform has a PCI + controller that can operate in endpoint mode. - Enabling this option will build the endpoint library, which - includes endpoint controller library and endpoint function - library. + Enabling this option will build the endpoint library, which + includes endpoint controller library and endpoint function + library. - If in doubt, say "N" to disable Endpoint support. + If in doubt, say "N" to disable Endpoint support. config PCI_ENDPOINT_CONFIGFS bool "PCI Endpoint Configfs Support" depends on PCI_ENDPOINT select CONFIGFS_FS help - This will enable the configfs entry that can be used to - configure the endpoint function and used to bind the - function with a endpoint controller. + This will enable the configfs entry that can be used to + configure the endpoint function and used to bind the + function with a endpoint controller. source "drivers/pci/endpoint/functions/Kconfig" diff --git a/drivers/pci/endpoint/functions/Kconfig b/drivers/pci/endpoint/functions/Kconfig index 8820d0f..5038da7 100644 --- a/drivers/pci/endpoint/functions/Kconfig +++ b/drivers/pci/endpoint/functions/Kconfig @@ -8,7 +8,7 @@ config PCI_EPF_TEST depends on PCI_ENDPOINT select CRC32 help - Enable this configuration option to enable the test driver - for PCI Endpoint. + Enable this configuration option to enable the test driver + for PCI Endpoint. - If in doubt, say "N" to disable Endpoint test driver. + If in doubt, say "N" to disable Endpoint test driver. diff --git a/drivers/pci/hotplug/Kconfig b/drivers/pci/hotplug/Kconfig index e9f78eb..dad20d8 100644 --- a/drivers/pci/hotplug/Kconfig +++ b/drivers/pci/hotplug/Kconfig @@ -83,7 +83,7 @@ config HOTPLUG_PCI_CPCI_ZT5550 depends on HOTPLUG_PCI_CPCI && X86 help Say Y here if you have an Performance Technologies (formerly Intel, - formerly just Ziatech) Ziatech ZT5550 CompactPCI system card. + formerly just Ziatech) Ziatech ZT5550 CompactPCI system card. To compile this driver as a module, choose M here: the module will be called cpcihp_zt5550. diff --git a/drivers/pci/switch/Kconfig b/drivers/pci/switch/Kconfig index aee28a5..6d1d3a6 100644 --- a/drivers/pci/switch/Kconfig +++ b/drivers/pci/switch/Kconfig @@ -6,10 +6,10 @@ menu "PCI switch controller drivers" config PCI_SW_SWITCHTEC tristate "MicroSemi Switchtec PCIe Switch Management Driver" help - Enables support for the management interface for the MicroSemi - Switchtec series of PCIe switches. Supports userspace access - to submit MRPC commands to the switch via /dev/switchtecX - devices. See <file:Documentation/switchtec.txt> for more - information. + Enables support for the management interface for the MicroSemi + Switchtec series of PCIe switches. Supports userspace access + to submit MRPC commands to the switch via /dev/switchtecX + devices. See <file:Documentation/switchtec.txt> for more + information. endmenu -- 1.9.1
Powered by blists - more mailing lists