| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 11 Mar 2019 14:18:06 +0100 From: "Enrico Weigelt, metux IT consult" <info@...ux.net> To: linux-kernel@...r.kernel.org Subject: [PATCH 054/114] drivers: platform: Kconfig: pedantic formatting Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@...ux.net> --- drivers/platform/chrome/Kconfig | 24 +++--- drivers/platform/x86/Kconfig | 165 ++++++++++++++++++++-------------------- 2 files changed, 94 insertions(+), 95 deletions(-) diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig index 5e2fde5..920277e 100644 --- a/drivers/platform/chrome/Kconfig +++ b/drivers/platform/chrome/Kconfig @@ -70,16 +70,16 @@ config CROS_EC_SPI 'pre-amble' bytes before the response actually starts. config CROS_EC_LPC - tristate "ChromeOS Embedded Controller (LPC)" - depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST) - help - If you say Y here, you get support for talking to the ChromeOS EC - over an LPC bus. This uses a simple byte-level protocol with a - checksum. This is used for userspace access only. The kernel - typically has its own communication methods. + tristate "ChromeOS Embedded Controller (LPC)" + depends on MFD_CROS_EC && ACPI && (X86 || COMPILE_TEST) + help + If you say Y here, you get support for talking to the ChromeOS EC + over an LPC bus. This uses a simple byte-level protocol with a + checksum. This is used for userspace access only. The kernel + typically has its own communication methods. - To compile this driver as a module, choose M here: the - module will be called cros_ec_lpc. + To compile this driver as a module, choose M here: the + module will be called cros_ec_lpc. config CROS_EC_LPC_MEC bool "ChromeOS Embedded Controller LPC Microchip EC (MEC) variant" @@ -94,9 +94,9 @@ config CROS_EC_LPC_MEC choose Y here. config CROS_EC_PROTO - bool - help - ChromeOS EC communication protocol helpers. + bool + help + ChromeOS EC communication protocol helpers. config CROS_KBD_LED_BACKLIGHT tristate "Backlight LED support for Chrome OS keyboards" diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig index a1ed131..4970b3d 100644 --- a/drivers/platform/x86/Kconfig +++ b/drivers/platform/x86/Kconfig @@ -27,7 +27,7 @@ config ACER_WMI depends on ACPI_WMI select INPUT_SPARSEKMAP # Acer WMI depends on ACPI_VIDEO when ACPI is enabled - select ACPI_VIDEO if ACPI + select ACPI_VIDEO if ACPI ---help--- This is a driver for newer Acer (and Wistron) laptops. It adds wireless radio and bluetooth control, and on some laptops, @@ -37,18 +37,18 @@ config ACER_WMI here. config ACER_WIRELESS - tristate "Acer Wireless Radio Control Driver" - depends on ACPI - depends on INPUT - ---help--- - The Acer Wireless Radio Control handles the airplane mode hotkey - present on new Acer laptops. + tristate "Acer Wireless Radio Control Driver" + depends on ACPI + depends on INPUT + ---help--- + The Acer Wireless Radio Control handles the airplane mode hotkey + present on new Acer laptops. - Say Y or M here if you have an Acer notebook with an airplane mode - hotkey. + Say Y or M here if you have an Acer notebook with an airplane mode + hotkey. - If you choose to compile this driver as a module the module will be - called acer-wireless. + If you choose to compile this driver as a module the module will be + called acer-wireless. config ACERHDF tristate "Acer Aspire One temperature and fan driver" @@ -78,10 +78,10 @@ config ALIENWARE_WMI depends on NEW_LEDS depends on ACPI_WMI ---help--- - This is a driver for controlling Alienware BIOS driven - features. It exposes an interface for controlling the AlienFX - zones on Alienware machines that don't contain a dedicated AlienFX - USB MCU such as the X51 and X51-R2. + This is a driver for controlling Alienware BIOS driven + features. It exposes an interface for controlling the AlienFX + zones on Alienware machines that don't contain a dedicated AlienFX + USB MCU such as the X51 and X51-R2. config ASUS_LAPTOP tristate "Asus Laptop Extras" @@ -146,12 +146,12 @@ config DELL_SMBIOS_WMI select DELL_WMI_DESCRIPTOR depends on DELL_SMBIOS ---help--- - This provides an implementation for the Dell SMBIOS calling interface - communicated over ACPI-WMI. + This provides an implementation for the Dell SMBIOS calling interface + communicated over ACPI-WMI. - If you have a Dell computer from >2007 you should say Y here. - If you aren't sure and this module doesn't work for your computer - it just won't load. + If you have a Dell computer from >2007 you should say Y here. + If you aren't sure and this module doesn't work for your computer + it just won't load. config DELL_SMBIOS_SMM bool "Dell SMBIOS driver SMM backend" @@ -159,12 +159,12 @@ config DELL_SMBIOS_SMM depends on DCDBAS depends on DELL_SMBIOS ---help--- - This provides an implementation for the Dell SMBIOS calling interface - communicated over SMI/SMM. + This provides an implementation for the Dell SMBIOS calling interface + communicated over SMI/SMM. - If you have a Dell computer from <=2017 you should say Y here. - If you aren't sure and this module doesn't work for your computer - it just won't load. + If you have a Dell computer from <=2017 you should say Y here. + If you aren't sure and this module doesn't work for your computer + it just won't load. config DELL_LAPTOP tristate "Dell Laptop Extras" @@ -254,12 +254,11 @@ config DELL_RBU select FW_LOADER select FW_LOADER_USER_HELPER help - Say m if you want to have the option of updating the BIOS for your - DELL system. Note you need a Dell OpenManage or Dell Update package (DUP) - supporting application to communicate with the BIOS regarding the new - image for the image update to take effect. - See <file:Documentation/dell_rbu.txt> for more details on the driver. - + Say m if you want to have the option of updating the BIOS for your + DELL system. Note you need a Dell OpenManage or Dell Update package (DUP) + supporting application to communicate with the BIOS regarding the new + image for the image update to take effect. + See <file:Documentation/dell_rbu.txt> for more details on the driver. config FUJITSU_LAPTOP tristate "Fujitsu Laptop Extras" @@ -281,21 +280,21 @@ config FUJITSU_LAPTOP If you have a Fujitsu laptop, say Y or M here. config FUJITSU_TABLET - tristate "Fujitsu Tablet Extras" - depends on ACPI - depends on INPUT - ---help--- - This is a driver for tablets built by Fujitsu: + tristate "Fujitsu Tablet Extras" + depends on ACPI + depends on INPUT + ---help--- + This is a driver for tablets built by Fujitsu: - * Lifebook P1510/P1610/P1620/Txxxx - * Stylistic ST5xxx - * Possibly other Fujitsu tablet models + * Lifebook P1510/P1610/P1620/Txxxx + * Stylistic ST5xxx + * Possibly other Fujitsu tablet models - It adds support for the panel buttons, docking station detection, - tablet/notebook mode detection for convertible and - orientation detection for docked slates. + It adds support for the panel buttons, docking station detection, + tablet/notebook mode detection for convertible and + orientation detection for docked slates. - If you have a Fujitsu convertible or slate, say Y or M here. + If you have a Fujitsu convertible or slate, say Y or M here. config AMILO_RFKILL tristate "Fujitsu-Siemens Amilo rfkill support" @@ -350,11 +349,11 @@ config HP_WIRELESS depends on ACPI depends on INPUT help - This driver provides supports for new HP wireless button for Windows 8. - On such systems the driver should load automatically (via ACPI alias). + This driver provides supports for new HP wireless button for Windows 8. + On such systems the driver should load automatically (via ACPI alias). - To compile this driver as a module, choose M here: the module will - be called hp-wireless. + To compile this driver as a module, choose M here: the module will + be called hp-wireless. config HP_WMI tristate "HP WMI extras" @@ -363,11 +362,11 @@ config HP_WMI depends on RFKILL || RFKILL = n select INPUT_SPARSEKMAP help - Say Y here if you want to support WMI-based hotkeys on HP laptops and - to read data from WMI such as docking or ambient light sensor state. + Say Y here if you want to support WMI-based hotkeys on HP laptops and + to read data from WMI such as docking or ambient light sensor state. - To compile this driver as a module, choose M here: the module will - be called hp-wmi. + To compile this driver as a module, choose M here: the module will + be called hp-wmi. config LG_LAPTOP tristate "LG Laptop Extras" @@ -377,11 +376,11 @@ config LG_LAPTOP select INPUT_SPARSEKMAP select LEDS_CLASS help - This driver adds support for hotkeys as well as control of keyboard - backlight, battery maximum charge level and various other ACPI - features. + This driver adds support for hotkeys as well as control of keyboard + backlight, battery maximum charge level and various other ACPI + features. - If you have an LG Gram laptop, say Y or M here. + If you have an LG Gram laptop, say Y or M here. config MSI_LAPTOP tristate "MSI Laptop Extras" @@ -788,10 +787,10 @@ config MSI_WMI depends on ACPI_VIDEO || ACPI_VIDEO = n select INPUT_SPARSEKMAP help - Say Y here if you want to support WMI-based hotkeys on MSI laptops. + Say Y here if you want to support WMI-based hotkeys on MSI laptops. - To compile this driver as a module, choose M here: the module will - be called msi-wmi. + To compile this driver as a module, choose M here: the module will + be called msi-wmi. config PEAQ_WMI tristate "PEAQ 2-in-1 WMI hotkey driver" @@ -799,7 +798,7 @@ config PEAQ_WMI depends on INPUT select INPUT_POLLDEV help - Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s. + Say Y here if you want to support WMI-based hotkeys on PEAQ 2-in-1s. config TOPSTAR_LAPTOP tristate "Topstar Laptop Extras" @@ -1002,11 +1001,11 @@ config INTEL_MID_POWER_BUTTON If unsure, say N. config INTEL_MFLD_THERMAL - tristate "Thermal driver for Intel Medfield platform" - depends on MFD_INTEL_MSIC && THERMAL - help - Say Y here to enable thermal driver support for the Intel Medfield - platform. + tristate "Thermal driver for Intel Medfield platform" + depends on MFD_INTEL_MSIC && THERMAL + help + Say Y here to enable thermal driver support for the Intel Medfield + platform. config INTEL_IPS tristate "Intel Intelligent Power Sharing" @@ -1061,17 +1060,17 @@ config IBM_RTL tristate "Device driver to enable PRTL support" depends on PCI ---help--- - Enable support for IBM Premium Real Time Mode (PRTM). - This module will allow you the enter and exit PRTM in the BIOS via - sysfs on platforms that support this feature. System in PRTM will - not receive CPU-generated SMIs for recoverable errors. Use of this - feature without proper support may void your hardware warranty. + Enable support for IBM Premium Real Time Mode (PRTM). + This module will allow you the enter and exit PRTM in the BIOS via + sysfs on platforms that support this feature. System in PRTM will + not receive CPU-generated SMIs for recoverable errors. Use of this + feature without proper support may void your hardware warranty. - If the proper BIOS support is found the driver will load and create - /sys/devices/system/ibm_rtl/. The "state" variable will indicate - whether or not the BIOS is in PRTM. - state = 0 (BIOS SMIs on) - state = 1 (BIOS SMIs off) + If the proper BIOS support is found the driver will load and create + /sys/devices/system/ibm_rtl/. The "state" variable will indicate + whether or not the BIOS is in PRTM. + state = 0 (BIOS SMIs on) + state = 1 (BIOS SMIs off) config XO1_RFKILL tristate "OLPC XO-1 software RF kill switch" @@ -1110,10 +1109,10 @@ config SAMSUNG_LAPTOP will be called samsung-laptop. config MXM_WMI - tristate "WMI support for MXM Laptop Graphics" - depends on ACPI_WMI - ---help--- - MXM is a standard for laptop graphics cards, the WMI interface + tristate "WMI support for MXM Laptop Graphics" + depends on ACPI_WMI + ---help--- + MXM is a standard for laptop graphics cards, the WMI interface is required for switchable nvidia graphics machines config INTEL_OAKTRAIL @@ -1149,7 +1148,7 @@ config APPLE_GMUX control is supported by the driver. config INTEL_RST - tristate "Intel Rapid Start Technology Driver" + tristate "Intel Rapid Start Technology Driver" depends on ACPI ---help--- This driver provides support for modifying paramaters on systems @@ -1161,7 +1160,7 @@ config INTEL_RST as usual. config INTEL_SMARTCONNECT - tristate "Intel Smart Connect disabling driver" + tristate "Intel Smart Connect disabling driver" depends on ACPI ---help--- Intel Smart Connect is a technology intended to permit devices to @@ -1320,6 +1319,6 @@ config PCENGINES_APU2 endif # X86_PLATFORM_DEVICES config PMC_ATOM - def_bool y - depends on PCI - select COMMON_CLK + def_bool y + depends on PCI + select COMMON_CLK -- 1.9.1
Powered by blists - more mailing lists