| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1552310346-7629-22-git-send-email-info@metux.net> Date: Mon, 11 Mar 2019 14:17:33 +0100 From: "Enrico Weigelt, metux IT consult" <info@...ux.net> To: linux-kernel@...r.kernel.org Subject: [PATCH 021/114] drivers: scsi: Kconfig: pedantic formatting Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up. Signed-off-by: Enrico Weigelt, metux IT consult <info@...ux.net> --- drivers/scsi/Kconfig | 63 +++++++++++++++++++++---------------------- drivers/scsi/pcmcia/Kconfig | 2 +- drivers/scsi/qedf/Kconfig | 8 +++--- drivers/scsi/smartpqi/Kconfig | 16 +++++------ 4 files changed, 44 insertions(+), 45 deletions(-) diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index d528018..1a1cca8 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1,9 +1,9 @@ menu "SCSI device support" config SCSI_MOD - tristate - default y if SCSI=n || SCSI=y - default m if SCSI=m + tristate + default y if SCSI=n || SCSI=y + default m if SCSI=m config RAID_ATTRS tristate "RAID Transport Class" @@ -47,7 +47,7 @@ config SCSI_ESP_PIO config SCSI_NETLINK bool - default n + default n depends on NET config SCSI_PROC_FS @@ -307,25 +307,25 @@ config ISCSI_TCP select CRYPTO_CRC32C select SCSI_ISCSI_ATTRS help - The iSCSI Driver provides a host with the ability to access storage - through an IP network. The driver uses the iSCSI protocol to transport - SCSI requests and responses over a TCP/IP network between the host - (the "initiator") and "targets". Architecturally, the iSCSI driver - combines with the host's TCP/IP stack, network drivers, and Network - Interface Card (NIC) to provide the same functions as a SCSI or a - Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA). + The iSCSI Driver provides a host with the ability to access storage + through an IP network. The driver uses the iSCSI protocol to transport + SCSI requests and responses over a TCP/IP network between the host + (the "initiator") and "targets". Architecturally, the iSCSI driver + combines with the host's TCP/IP stack, network drivers, and Network + Interface Card (NIC) to provide the same functions as a SCSI or a + Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA). - To compile this driver as a module, choose M here: the - module will be called iscsi_tcp. + To compile this driver as a module, choose M here: the + module will be called iscsi_tcp. - The userspace component needed to initialize the driver, documentation, - and sample configuration files can be found here: + The userspace component needed to initialize the driver, documentation, + and sample configuration files can be found here: - http://open-iscsi.org + http://open-iscsi.org config ISCSI_BOOT_SYSFS tristate "iSCSI Boot Sysfs Interface" - default n + default n help This option enables support for exposing iSCSI boot information via sysfs to userspace. If you wish to export this information, @@ -340,7 +340,7 @@ source "drivers/scsi/cxlflash/Kconfig" config SGIWD93_SCSI tristate "SGI WD93C93 SCSI Driver" depends on SGI_HAS_WD93 && SCSI - help + help If you have a Western Digital WD93 SCSI controller on an SGI MIPS system, say Y. Otherwise, say N. @@ -455,7 +455,6 @@ config SCSI_AACRAID To compile this driver as a module, choose M here: the module will be called aacraid. - source "drivers/scsi/aic7xxx/Kconfig.aic7xxx" source "drivers/scsi/aic7xxx/Kconfig.aic79xx" source "drivers/scsi/aic94xx/Kconfig" @@ -475,7 +474,7 @@ config SCSI_DPT_I2O tristate "Adaptec I2O RAID support " depends on SCSI && PCI && VIRT_TO_BUS help - This driver supports all of Adaptec's I2O based RAID controllers as + This driver supports all of Adaptec's I2O based RAID controllers as well as the DPT SmartRaid V cards. This is an Adaptec maintained driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>. @@ -669,7 +668,7 @@ config SCSI_GDTH ---help--- Formerly called GDT SCSI Disk Array Controller Support. - This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) + This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) manufactured by Intel Corporation/ICP vortex GmbH. It is documented in the kernel source in <file:drivers/scsi/gdth.c> and <file:drivers/scsi/gdth.h>. @@ -1152,8 +1151,8 @@ config SCSI_LPFC depends on NVME_FC || NVME_FC=n select CRC_T10DIF ---help--- - This lpfc driver supports the Emulex LightPulse - Family of Fibre Channel PCI host adapters. + This lpfc driver supports the Emulex LightPulse + Family of Fibre Channel PCI host adapters. config SCSI_LPFC_DEBUG_FS bool "Emulex LightPulse Fibre Channel debugfs Support" @@ -1466,14 +1465,14 @@ config ZFCP depends on S390 && QDIO && SCSI depends on SCSI_FC_ATTRS help - If you want to access SCSI devices attached to your IBM eServer - zSeries by means of Fibre Channel interfaces say Y. - For details please refer to the documentation provided by IBM at - <http://oss.software.ibm.com/developerworks/opensource/linux390> + If you want to access SCSI devices attached to your IBM eServer + zSeries by means of Fibre Channel interfaces say Y. + For details please refer to the documentation provided by IBM at + <http://oss.software.ibm.com/developerworks/opensource/linux390> - This driver is also available as a module. This module will be - called zfcp. If you want to compile it as a module, say M here - and read <file:Documentation/kbuild/modules.txt>. + This driver is also available as a module. This module will be + called zfcp. If you want to compile it as a module, say M here + and read <file:Documentation/kbuild/modules.txt>. config SCSI_PMCRAID tristate "PMC SIERRA Linux MaxRAID adapter support" @@ -1504,8 +1503,8 @@ config SCSI_VIRTIO tristate "virtio-scsi support" depends on VIRTIO help - This is the virtual HBA driver for virtio. If the kernel will - be used in a virtual machine, say Y or M. + This is the virtual HBA driver for virtio. If the kernel will + be used in a virtual machine, say Y or M. source "drivers/scsi/csiostor/Kconfig" diff --git a/drivers/scsi/pcmcia/Kconfig b/drivers/scsi/pcmcia/Kconfig index 2d435f1..b63b34d 100644 --- a/drivers/scsi/pcmcia/Kconfig +++ b/drivers/scsi/pcmcia/Kconfig @@ -32,7 +32,7 @@ config PCMCIA_NINJA_SCSI NinjaSCSI-3: (version string: "WBT","NinjaSCSI-3","R1.0") IO-DATA PCSC-FP ALPHA DATA AD-PCS201 - CyQ've SFC-201 + CyQ've SFC-201 LOGITECH LPM-SCSI2E Pioneer PCR-PR24's card I-O DATA CDPS-PX24's card (PCSC-F) diff --git a/drivers/scsi/qedf/Kconfig b/drivers/scsi/qedf/Kconfig index 943f5ee..e2693db 100644 --- a/drivers/scsi/qedf/Kconfig +++ b/drivers/scsi/qedf/Kconfig @@ -2,10 +2,10 @@ config QEDF tristate "QLogic QEDF 25/40/100Gb FCoE Initiator Driver Support" depends on PCI && SCSI depends on QED - depends on LIBFC - depends on LIBFCOE + depends on LIBFC + depends on LIBFCOE select QED_LL2 select QED_FCOE ---help--- - This driver supports FCoE offload for the QLogic FastLinQ - 41000 Series Converged Network Adapters. + This driver supports FCoE offload for the QLogic FastLinQ + 41000 Series Converged Network Adapters. diff --git a/drivers/scsi/smartpqi/Kconfig b/drivers/scsi/smartpqi/Kconfig index 97e159c..fafc7f7 100644 --- a/drivers/scsi/smartpqi/Kconfig +++ b/drivers/scsi/smartpqi/Kconfig @@ -41,14 +41,14 @@ config SCSI_SMARTPQI select SCSI_SAS_ATTRS select RAID_ATTRS ---help--- - This driver supports Microsemi PQI controllers. + This driver supports Microsemi PQI controllers. - <http://www.microsemi.com> + <http://www.microsemi.com> - To compile this driver as a module, choose M here: the - module will be called smartpqi. + To compile this driver as a module, choose M here: the + module will be called smartpqi. - Note: the aacraid driver will not manage a smartpqi - controller. You need to enable smartpqi for smartpqi - controllers. For more information, please see - Documentation/scsi/smartpqi.txt + Note: the aacraid driver will not manage a smartpqi + controller. You need to enable smartpqi for smartpqi + controllers. For more information, please see + Documentation/scsi/smartpqi.txt -- 1.9.1
Powered by blists - more mailing lists