linux-kernel - [PATCH 4.19 131/149] ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190312170400.368341561@linuxfoundation.org>
Date:   Tue, 12 Mar 2019 10:09:09 -0700
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Markus Reichl <m.reichl@...etechno.de>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Marek Szyprowski <m.szyprowski@...sung.com>,
        Krzysztof Kozlowski <krzk@...nel.org>
Subject: [PATCH 4.19 131/149] ARM: dts: exynos: Fix pinctrl definition for eMMC RTSN line on Odroid X2/U3

4.19-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Marek Szyprowski <m.szyprowski@...sung.com>

commit ec33745bccc8f336957c751f4153421cc9ef5a54 upstream.

Commit 225da7e65a03 ("ARM: dts: add eMMC reset line for
exynos4412-odroid-common") added MMC power sequence for eMMC card of
Odroid X2/U3. It reused generic sd1_cd pin control configuration node
and only disabled pull-up. However that time the pinctrl configuration
was not applied during MMC power sequence driver initialization. This
has been changed later by commit d97a1e5d7cd2 ("mmc: pwrseq: convert to
proper platform device").

It turned out then, that the provided pinctrl configuration is not
correct, because the eMMC_RTSN line is being re-configured as 'special
function/card detect function for mmc1 controller' not the simple
'output', thus the power sequence driver doesn't really set the pin
value. This in effect broke the reboot of Odroid X2/U3 boards. Fix this
by providing separate node with eMMC_RTSN pin configuration.

Cc: <stable@...r.kernel.org>
Reported-by: Markus Reichl <m.reichl@...etechno.de>
Suggested-by: Ulf Hansson <ulf.hansson@...aro.org>
Fixes: 225da7e65a03 ("ARM: dts: add eMMC reset line for exynos4412-odroid-common")
Signed-off-by: Marek Szyprowski <m.szyprowski@...sung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>

---
 arch/arm/boot/dts/exynos4412-odroid-common.dtsi |   13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -49,7 +49,7 @@
 	};

 	emmc_pwrseq: pwrseq {
-		pinctrl-0 = <&sd1_cd>;
+		pinctrl-0 = <&emmc_rstn>;
 		pinctrl-names = "default";
 		compatible = "mmc-pwrseq-emmc";
 		reset-gpios = <&gpk1 2 GPIO_ACTIVE_LOW>;
@@ -161,12 +161,6 @@
 	cpu0-supply = <&buck2_reg>;
 };

-/* RSTN signal for eMMC */
-&sd1_cd {
-	samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
-	samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
-};
-
 &pinctrl_1 {
 	gpio_power_key: power_key {
 		samsung,pins = "gpx1-3";
@@ -184,6 +178,11 @@
 		samsung,pins = "gpx3-7";
 		samsung,pin-pud = <EXYNOS_PIN_PULL_DOWN>;
 	};
+
+	emmc_rstn: emmc-rstn {
+		samsung,pins = "gpk1-2";
+		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
+	};
 };

 &ehci {