| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1552380290-19951-5-git-send-email-yamada.masahiro@socionext.com>
Date: Tue, 12 Mar 2019 17:44:45 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: linux-mtd@...ts.infradead.org,
Miquel Raynal <miquel.raynal@...tlin.com>
Cc: Boris Brezillon <bbrezillon@...nel.org>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Brian Norris <computersforpeace@...il.com>,
linux-kernel@...r.kernel.org, Marek Vasut <marek.vasut@...il.com>,
Richard Weinberger <richard@....at>,
David Woodhouse <dwmw2@...radead.org>
Subject: [PATCH v3 4/9] mtd: rawnand: denali: switch over to ->exec_op() from legacy hooks
Implement ->exec_op(), and remove the deprecated hooks.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
---
Changes in v3:
- Fix byte-swap in denali_exec_in16()
Changes in v2: None
drivers/mtd/nand/raw/denali.c | 234 +++++++++++++++++++++++-------------------
1 file changed, 126 insertions(+), 108 deletions(-)
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index d2040b7..2c7dc9b 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -206,85 +206,11 @@ static uint32_t denali_wait_for_irq(struct denali_nand_info *denali,
return denali->irq_status;
}
-static void denali_read_buf(struct nand_chip *chip, uint8_t *buf, int len)
+static void denali_select_target(struct nand_chip *chip, int cs)
{
- struct mtd_info *mtd = nand_to_mtd(chip);
- struct denali_nand_info *denali = mtd_to_denali(mtd);
- u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
- int i;
-
- for (i = 0; i < len; i++)
- buf[i] = denali->host_read(denali, addr);
-}
-
-static void denali_write_buf(struct nand_chip *chip, const uint8_t *buf,
- int len)
-{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
- u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
- int i;
-
- for (i = 0; i < len; i++)
- denali->host_write(denali, addr, buf[i]);
-}
-
-static void denali_read_buf16(struct nand_chip *chip, uint8_t *buf, int len)
-{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
- u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
- uint16_t *buf16 = (uint16_t *)buf;
- int i;
-
- for (i = 0; i < len / 2; i++)
- buf16[i] = denali->host_read(denali, addr);
-}
-
-static void denali_write_buf16(struct nand_chip *chip, const uint8_t *buf,
- int len)
-{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
- u32 addr = DENALI_MAP11_DATA | DENALI_BANK(denali);
- const uint16_t *buf16 = (const uint16_t *)buf;
- int i;
-
- for (i = 0; i < len / 2; i++)
- denali->host_write(denali, addr, buf16[i]);
-}
-
-static uint8_t denali_read_byte(struct nand_chip *chip)
-{
- uint8_t byte;
-
- denali_read_buf(chip, &byte, 1);
-
- return byte;
-}
-
-static void denali_write_byte(struct nand_chip *chip, uint8_t byte)
-{
- denali_write_buf(chip, &byte, 1);
-}
-
-static void denali_cmd_ctrl(struct nand_chip *chip, int dat, unsigned int ctrl)
-{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
- uint32_t type;
-
- if (ctrl & NAND_CLE)
- type = DENALI_MAP11_CMD;
- else if (ctrl & NAND_ALE)
- type = DENALI_MAP11_ADDR;
- else
- return;
-
- /*
- * Some commands are followed by chip->legacy.waitfunc.
- * irq_status must be cleared here to catch the R/B# interrupt later.
- */
- if (ctrl & NAND_CTRL_CHANGE)
- denali_reset_irq(denali);
+ struct denali_nand_info *denali = to_denali(chip);
- denali->host_write(denali, DENALI_BANK(denali) | type, dat);
+ denali->active_bank = cs;
}
static int denali_check_erased_page(struct nand_chip *chip,
@@ -596,6 +522,8 @@ static int denali_data_xfer(struct nand_chip *chip, void *buf, size_t size,
{
struct denali_nand_info *denali = to_denali(chip);
+ denali_select_target(chip, chip->cur_cs);
+
iowrite32(raw ? 0 : ECC_ENABLE__FLAG, denali->reg + ECC_ENABLE);
iowrite32(raw ? TRANSFER_SPARE_REG__FLAG : 0,
denali->reg + TRANSFER_SPARE_REG);
@@ -882,24 +810,6 @@ static int denali_write_page(struct nand_chip *chip, const uint8_t *buf,
0, 1);
}
-static void denali_select_chip(struct nand_chip *chip, int cs)
-{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
-
- denali->active_bank = cs;
-}
-
-static int denali_waitfunc(struct nand_chip *chip)
-{
- struct denali_nand_info *denali = mtd_to_denali(nand_to_mtd(chip));
- uint32_t irq_status;
-
- /* R/B# pin transitioned from low to high? */
- irq_status = denali_wait_for_irq(denali, INTR__INT_ACT);
-
- return irq_status & INTR__INT_ACT ? 0 : NAND_STATUS_FAIL;
-}
-
static int denali_setup_data_interface(struct nand_chip *chip, int chipnr,
const struct nand_data_interface *conf)
{
@@ -1211,13 +1121,6 @@ static int denali_attach_chip(struct nand_chip *chip)
mtd_set_ooblayout(mtd, &denali_ooblayout_ops);
- if (chip->options & NAND_BUSWIDTH_16) {
- chip->legacy.read_buf = denali_read_buf16;
- chip->legacy.write_buf = denali_write_buf16;
- } else {
- chip->legacy.read_buf = denali_read_buf;
- chip->legacy.write_buf = denali_write_buf;
- }
chip->ecc.read_page = denali_read_page;
chip->ecc.read_page_raw = denali_read_page_raw;
chip->ecc.write_page = denali_write_page;
@@ -1249,9 +1152,130 @@ static void denali_detach_chip(struct nand_chip *chip)
kfree(denali->buf);
}
+static void denali_exec_in8(struct denali_nand_info *denali, u32 type,
+ u8 *buf, unsigned int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ buf[i] = denali->host_read(denali, type | DENALI_BANK(denali));
+}
+
+static void denali_exec_in16(struct denali_nand_info *denali, u32 type,
+ u8 *buf, unsigned int len)
+{
+ u32 data;
+ int i;
+
+ for (i = 0; i < len; i += 2) {
+ data = denali->host_read(denali, type | DENALI_BANK(denali));
+ /* bit 31:24 and 15:8 are used for DDR */
+ buf[i] = data;
+ buf[i + 1] = data >> 16;
+ }
+}
+
+static void denali_exec_out8(struct denali_nand_info *denali, u32 type,
+ const u8 *buf, unsigned int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ denali->host_write(denali, type | DENALI_BANK(denali), buf[i]);
+}
+
+static void denali_exec_out16(struct denali_nand_info *denali, u32 type,
+ const u8 *buf, unsigned int len)
+{
+ int i;
+
+ for (i = 0; i < len; i += 2)
+ denali->host_write(denali, type | DENALI_BANK(denali),
+ buf[i + 1] << 16 | buf[i]);
+}
+
+static int denali_exec_waitrdy(struct denali_nand_info *denali)
+{
+ u32 irq_stat;
+
+ /* R/B# pin transitioned from low to high? */
+ irq_stat = denali_wait_for_irq(denali, INTR__INT_ACT);
+
+ /* Just in case nand_operation has multiple NAND_OP_WAITRDY_INSTR. */
+ denali_reset_irq(denali);
+
+ return irq_stat & INTR__INT_ACT ? 0 : -EIO;
+}
+
+static int denali_exec_instr(struct nand_chip *chip,
+ const struct nand_op_instr *instr)
+{
+ struct denali_nand_info *denali = to_denali(chip);
+ bool width16 = chip->options & NAND_BUSWIDTH_16;
+
+ switch (instr->type) {
+ case NAND_OP_CMD_INSTR:
+ denali_exec_out8(denali, DENALI_MAP11_CMD,
+ &instr->ctx.cmd.opcode, 1);
+ return 0;
+ case NAND_OP_ADDR_INSTR:
+ denali_exec_out8(denali, DENALI_MAP11_ADDR,
+ instr->ctx.addr.addrs,
+ instr->ctx.addr.naddrs);
+ return 0;
+ case NAND_OP_DATA_IN_INSTR:
+ (!instr->ctx.data.force_8bit && width16 ?
+ denali_exec_in16 :
+ denali_exec_in8)(denali, DENALI_MAP11_DATA,
+ instr->ctx.data.buf.in,
+ instr->ctx.data.len);
+ return 0;
+ case NAND_OP_DATA_OUT_INSTR:
+ (!instr->ctx.data.force_8bit && width16 ?
+ denali_exec_out16 :
+ denali_exec_out8)(denali, DENALI_MAP11_DATA,
+ instr->ctx.data.buf.out,
+ instr->ctx.data.len);
+ return 0;
+ case NAND_OP_WAITRDY_INSTR:
+ return denali_exec_waitrdy(denali);
+ default:
+ WARN_ONCE(1, "unsupported NAND instruction type: %d\n",
+ instr->type);
+
+ return -EINVAL;
+ }
+}
+
+static int denali_exec_op(struct nand_chip *chip,
+ const struct nand_operation *op, bool check_only)
+{
+ int i, ret;
+
+ if (check_only)
+ return 0;
+
+ denali_select_target(chip, op->cs);
+
+ /*
+ * Some commands contain NAND_OP_WAITRDY_INSTR.
+ * irq must be cleared here to catch the R/B# interrupt there.
+ */
+ denali_reset_irq(to_denali(chip));
+
+ for (i = 0; i < op->ninstrs; i++) {
+ ret = denali_exec_instr(chip, &op->instrs[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
static const struct nand_controller_ops denali_controller_ops = {
.attach_chip = denali_attach_chip,
.detach_chip = denali_detach_chip,
+ .exec_op = denali_exec_op,
.setup_data_interface = denali_setup_data_interface,
};
@@ -1286,12 +1310,6 @@ int denali_init(struct denali_nand_info *denali)
if (!mtd->name)
mtd->name = "denali-nand";
- chip->legacy.select_chip = denali_select_chip;
- chip->legacy.read_byte = denali_read_byte;
- chip->legacy.write_byte = denali_write_byte;
- chip->legacy.cmd_ctrl = denali_cmd_ctrl;
- chip->legacy.waitfunc = denali_waitfunc;
-
if (features & FEATURES__INDEX_ADDR) {
denali->host_read = denali_indexed_read;
denali->host_write = denali_indexed_write;
--
2.7.4
Powered by blists - more mailing lists