linux-kernel - Re: [PATCH v1] Bluetooth: hci_qca: Give enough time to ROME controller to bootup.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 13 Mar 2019 17:45:07 +0800
From:   rjliao@...eaurora.org
To:     Balakrishna Godavarthi <bgodavar@...eaurora.org>
Cc:     Stephen Boyd <swboyd@...omium.org>, johan.hedberg@...il.com,
        marcel@...tmann.org, mka@...omium.org,
        linux-kernel@...r.kernel.org, linux-bluetooth@...r.kernel.org,
        hemantg@...eaurora.org, linux-arm-msm@...r.kernel.org
Subject: Re: [PATCH v1] Bluetooth: hci_qca: Give enough time to ROME
 controller to bootup.

在 2019-03-07 14:49，Balakrishna Godavarthi 写道：
> Hi Stepen,
> 
> On 2019-03-07 04:03, Stephen Boyd wrote:
>> Quoting Balakrishna Godavarthi (2019-03-06 08:21:13)
>>> This patch enables enough time to ROME controller to bootup
>>> after we bring the enable ping out of reset.
>>> 
>>> Signed-off-by: Balakrishna Godavarthi <bgodavar@...eaurora.org>
>>> ---
>> 
>> Any Fixes tag? And maybe some more explanation or background on where
>> 150 ms sleep comes from would be useful. Was it determined
>> experimentally or did it come from a datasheet somewhere? Does the 
>> time
>> differ between boards?
>> 
> [Bala]: this was observed in our stress testing and even the CHIP 
> firmware team
>         confirmed that BT chip required at least 150 ms to boot up.
> 
> @Rocky to confirm my statement.
> 
>>>  drivers/bluetooth/hci_qca.c | 2 ++
>>>  1 file changed, 2 insertions(+)
>>> 
>>> diff --git a/drivers/bluetooth/hci_qca.c 
>>> b/drivers/bluetooth/hci_qca.c
>>> index 237aea34b69f..1953b13511e7 100644
>>> --- a/drivers/bluetooth/hci_qca.c
>>> +++ b/drivers/bluetooth/hci_qca.c
>>> @@ -508,6 +508,8 @@ static int qca_open(struct hci_uart *hu)
>>>                 qcadev = serdev_device_get_drvdata(hu->serdev);
>>>                 if (qcadev->btsoc_type != QCA_WCN3990) {
>>>                         gpiod_set_value_cansleep(qcadev->bt_en, 1);
>>> +                       /* Controller needs time to bootup. */
>>> +                       msleep(150);
>>>                 } else {
>>>                         hu->init_speed = qcadev->init_speed;
>>>                         hu->oper_speed = qcadev->oper_speed;

Hello,

Any concern to merge this change? Without this change the Rome cannot up 
while running the serdev way, we should mainline this change ASAP.