| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190315130825.9005-4-jagan@amarulasolutions.com>
Date: Fri, 15 Mar 2019 18:38:22 +0530
From: Jagan Teki <jagan@...rulasolutions.com>
To: Andrzej Hajda <a.hajda@...sung.com>,
Laurent Pinchart <Laurent.pinchart@...asonboard.com>,
Chen-Yu Tsai <wens@...e.org>,
Maxime Ripard <maxime.ripard@...tlin.com>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: Michael Trimarchi <michael@...rulasolutions.com>,
dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...glegroups.com, linux-amarula@...rulasolutions.com,
Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH 3/6] drm/sun4i: dsi: Add bridge support
Some display panels would come up with a non-DSI output which
can have an option to connect DSI interface by means of bridge
convertor.
This DSI to non-DSI bridge convertor would require a bridge
driver that would communicate the DSI controller for bridge
functionalities.
So, add support for bridge functionalities in Allwinner DSI
controller.
Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 65 +++++++++++++++++++-------
drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h | 1 +
2 files changed, 49 insertions(+), 17 deletions(-)
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 0960b96b62cc..64d74313b842 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -781,6 +781,9 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
if (!IS_ERR(dsi->panel))
drm_panel_prepare(dsi->panel);
+ if (!IS_ERR(dsi->bridge))
+ drm_bridge_pre_enable(dsi->bridge);
+
/*
* FIXME: This should be moved after the switch to HS mode.
*
@@ -796,6 +799,9 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
if (!IS_ERR(dsi->panel))
drm_panel_enable(dsi->panel);
+ if (!IS_ERR(dsi->bridge))
+ drm_bridge_enable(dsi->bridge);
+
sun6i_dsi_start(dsi, DSI_START_HSC);
udelay(1000);
@@ -812,6 +818,9 @@ static void sun6i_dsi_encoder_disable(struct drm_encoder *encoder)
if (!IS_ERR(dsi->panel)) {
drm_panel_disable(dsi->panel);
drm_panel_unprepare(dsi->panel);
+ } else if (!IS_ERR(dsi->bridge)) {
+ drm_bridge_disable(dsi->bridge);
+ drm_bridge_post_disable(dsi->bridge);
}
phy_power_off(dsi->dphy);
@@ -973,11 +982,16 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host,
struct sun6i_dsi *dsi = host_to_sun6i_dsi(host);
dsi->device = device;
- dsi->panel = of_drm_find_panel(device->dev.of_node);
- if (IS_ERR(dsi->panel))
- return PTR_ERR(dsi->panel);
- dev_info(host->dev, "Attached device %s\n", device->name);
+ dsi->bridge = of_drm_find_bridge(device->dev.of_node);
+ if (!dsi->bridge) {
+ dsi->panel = of_drm_find_panel(device->dev.of_node);
+ if (IS_ERR(dsi->panel))
+ return PTR_ERR(dsi->panel);
+ }
+
+ dev_info(host->dev, "Attached %s %s\n",
+ dsi->bridge ? "bridge" : "panel", device->name);
return 0;
}
@@ -1055,8 +1069,10 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
struct sun4i_tcon *tcon0 = sun4i_get_tcon0(drm);
int ret;
- if (!dsi->panel)
+ if (!(dsi->panel || dsi->bridge)) {
+ dev_info(drm->dev, "No panel or bridge found... DSI output disabled\n");
return -EPROBE_DEFER;
+ }
dsi->drv = drv;
@@ -1078,19 +1094,29 @@ static int sun6i_dsi_bind(struct device *dev, struct device *master,
}
dsi->encoder.possible_crtcs = BIT(0);
- drm_connector_helper_add(&dsi->connector,
- &sun6i_dsi_connector_helper_funcs);
- ret = drm_connector_init(drm, &dsi->connector,
- &sun6i_dsi_connector_funcs,
- DRM_MODE_CONNECTOR_DSI);
- if (ret) {
- dev_err(dsi->dev,
- "Couldn't initialise the DSI connector\n");
- goto err_cleanup_connector;
+ if (dsi->panel) {
+ drm_connector_helper_add(&dsi->connector,
+ &sun6i_dsi_connector_helper_funcs);
+ ret = drm_connector_init(drm, &dsi->connector,
+ &sun6i_dsi_connector_funcs,
+ DRM_MODE_CONNECTOR_DSI);
+ if (ret) {
+ dev_err(dsi->dev,
+ "Couldn't initialise the DSI connector\n");
+ goto err_cleanup_connector;
+ }
+
+ drm_connector_attach_encoder(&dsi->connector, &dsi->encoder);
+ drm_panel_attach(dsi->panel, &dsi->connector);
}
- drm_connector_attach_encoder(&dsi->connector, &dsi->encoder);
- drm_panel_attach(dsi->panel, &dsi->connector);
+ if (dsi->bridge) {
+ ret = drm_bridge_attach(&dsi->encoder, dsi->bridge, NULL);
+ if (ret) {
+ dev_err(dsi->dev, "Couldn't attach the DSI bridge\n");
+ goto err_cleanup_connector;
+ }
+ }
return 0;
@@ -1104,7 +1130,12 @@ static void sun6i_dsi_unbind(struct device *dev, struct device *master,
{
struct sun6i_dsi *dsi = dev_get_drvdata(dev);
- drm_panel_detach(dsi->panel);
+ if (dsi->panel)
+ drm_panel_detach(dsi->panel);
+
+ if (dsi->bridge)
+ drm_bridge_detach(dsi->bridge);
+
}
static const struct component_ops sun6i_dsi_ops = {
diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
index 5c4983212f89..76874ff8e3ef 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.h
@@ -36,6 +36,7 @@ struct sun6i_dsi {
struct sun4i_tcon *tcon;
struct mipi_dsi_device *device;
struct drm_panel *panel;
+ struct drm_bridge *bridge;
const struct sun6i_dsi_variant *variant;
};
--
2.18.0.321.gffc6fa0e3
Powered by blists - more mailing lists