| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 17 Mar 2019 18:15:32 +0000
From: Colin King <colin.king@...onical.com>
To: Jack Wang <jinpu.wang@...fitbricks.com>, lindar_liu@...sh.com,
"James E . J . Bottomley" <jejb@...ux.ibm.com>,
"Martin K . Petersen" <martin.petersen@...cle.com>,
linux-scsi@...r.kernel.org
Cc: kernel-janitors@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] scsi: pm8001: clean up various indentation issues
From: Colin Ian King <colin.king@...onical.com>
There are several lines of code where the indentation is
at an incorrect level; fix these.
Signed-off-by: Colin Ian King <colin.king@...onical.com>
---
drivers/scsi/pm8001/pm8001_hwi.c | 8 +++---
drivers/scsi/pm8001/pm8001_sas.c | 4 +--
drivers/scsi/pm8001/pm80xx_hwi.c | 44 ++++++++++++++++----------------
3 files changed, 28 insertions(+), 28 deletions(-)
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index d0bb357034d8..e0fee3d91d23 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -960,9 +960,9 @@ pm8001_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
return -1;
}
regVal = pm8001_cr32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET);
- PM8001_INIT_DBG(pm8001_ha,
- pm8001_printk("GPIO Output Control Register:"
- " = 0x%x\n", regVal));
+ PM8001_INIT_DBG(pm8001_ha,
+ pm8001_printk("GPIO Output Control Register:"
+ " = 0x%x\n", regVal));
/* set GPIO-0 output control to tri-state */
regVal &= 0xFFFFFFFC;
pm8001_cw32(pm8001_ha, 2, GPIO_GPIO_0_0UTPUT_CTL_OFFSET, regVal);
@@ -2928,7 +2928,7 @@ mpi_smp_completion(struct pm8001_hba_info *pm8001_ha, void *piomb)
PM8001_IO_DBG(pm8001_ha, pm8001_printk("IO_SUCCESS\n"));
ts->resp = SAS_TASK_COMPLETE;
ts->stat = SAM_STAT_GOOD;
- if (pm8001_dev)
+ if (pm8001_dev)
pm8001_dev->running_req--;
break;
case IO_ABORTED:
diff --git a/drivers/scsi/pm8001/pm8001_sas.c b/drivers/scsi/pm8001/pm8001_sas.c
index 084f2fcced0a..88eef3b18e41 100644
--- a/drivers/scsi/pm8001/pm8001_sas.c
+++ b/drivers/scsi/pm8001/pm8001_sas.c
@@ -740,8 +740,8 @@ static int pm8001_exec_internal_tmf_task(struct domain_device *dev,
wait_for_completion(&task->slow_task->completion);
if (pm8001_ha->chip_id != chip_8001) {
pm8001_dev->setds_completion = &completion_setstate;
- PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
- pm8001_dev, 0x01);
+ PM8001_CHIP_DISP->set_dev_state_req(pm8001_ha,
+ pm8001_dev, 0x01);
wait_for_completion(&completion_setstate);
}
res = -TMF_RESP_FUNC_FAILED;
diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c
index 63e4f7d34d6c..536d2b4384f8 100644
--- a/drivers/scsi/pm8001/pm80xx_hwi.c
+++ b/drivers/scsi/pm8001/pm80xx_hwi.c
@@ -1316,7 +1316,7 @@ pm80xx_chip_soft_rst(struct pm8001_hba_info *pm8001_ha)
static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha)
{
- u32 i;
+ u32 i;
PM8001_INIT_DBG(pm8001_ha,
pm8001_printk("chip reset start\n"));
@@ -4381,27 +4381,27 @@ static int pm80xx_chip_sata_req(struct pm8001_hba_info *pm8001_ha,
sata_cmd.len = cpu_to_le32(task->total_xfer_len);
sata_cmd.esgl = 0;
}
- /* scsi cdb */
- sata_cmd.atapi_scsi_cdb[0] =
- cpu_to_le32(((task->ata_task.atapi_packet[0]) |
- (task->ata_task.atapi_packet[1] << 8) |
- (task->ata_task.atapi_packet[2] << 16) |
- (task->ata_task.atapi_packet[3] << 24)));
- sata_cmd.atapi_scsi_cdb[1] =
- cpu_to_le32(((task->ata_task.atapi_packet[4]) |
- (task->ata_task.atapi_packet[5] << 8) |
- (task->ata_task.atapi_packet[6] << 16) |
- (task->ata_task.atapi_packet[7] << 24)));
- sata_cmd.atapi_scsi_cdb[2] =
- cpu_to_le32(((task->ata_task.atapi_packet[8]) |
- (task->ata_task.atapi_packet[9] << 8) |
- (task->ata_task.atapi_packet[10] << 16) |
- (task->ata_task.atapi_packet[11] << 24)));
- sata_cmd.atapi_scsi_cdb[3] =
- cpu_to_le32(((task->ata_task.atapi_packet[12]) |
- (task->ata_task.atapi_packet[13] << 8) |
- (task->ata_task.atapi_packet[14] << 16) |
- (task->ata_task.atapi_packet[15] << 24)));
+ /* scsi cdb */
+ sata_cmd.atapi_scsi_cdb[0] =
+ cpu_to_le32(((task->ata_task.atapi_packet[0]) |
+ (task->ata_task.atapi_packet[1] << 8) |
+ (task->ata_task.atapi_packet[2] << 16) |
+ (task->ata_task.atapi_packet[3] << 24)));
+ sata_cmd.atapi_scsi_cdb[1] =
+ cpu_to_le32(((task->ata_task.atapi_packet[4]) |
+ (task->ata_task.atapi_packet[5] << 8) |
+ (task->ata_task.atapi_packet[6] << 16) |
+ (task->ata_task.atapi_packet[7] << 24)));
+ sata_cmd.atapi_scsi_cdb[2] =
+ cpu_to_le32(((task->ata_task.atapi_packet[8]) |
+ (task->ata_task.atapi_packet[9] << 8) |
+ (task->ata_task.atapi_packet[10] << 16) |
+ (task->ata_task.atapi_packet[11] << 24)));
+ sata_cmd.atapi_scsi_cdb[3] =
+ cpu_to_le32(((task->ata_task.atapi_packet[12]) |
+ (task->ata_task.atapi_packet[13] << 8) |
+ (task->ata_task.atapi_packet[14] << 16) |
+ (task->ata_task.atapi_packet[15] << 24)));
}
/* Check for read log for failed drive and return */
--
2.20.1
Powered by blists - more mailing lists