lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190318073354.12151-3-wens@kernel.org>
Date:   Mon, 18 Mar 2019 15:33:50 +0800
From:   Chen-Yu Tsai <wens@...nel.org>
To:     Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        Maxime Ripard <maxime.ripard@...tlin.com>
Cc:     linux-sunxi@...glegroups.com, Chen-Yu Tsai <wens@...e.org>,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 2/6] nvmem: sunxi_sid: Optimize register read-out method

From: Chen-Yu Tsai <wens@...e.org>

SID cells are 32-bit aligned, and a multiple of 32 bits in length. The
only outlier is the thermal sensor calibration data, which is 16 bits
per sensor. However a whole 64 bits is allocated for this purpose, so
we could consider it conforming to the rule above.

Also, the register read-out method assumes native endian, unlike the
direct MMIO method, which assumes big endian. Thus no endian conversion
is involved.

Under these assumptions, the register read-out method can be slightly
optimized. Instead of reading one word then discarding 3 bytes, read
the whole word directly into the buffer. However, for reads under 4
bytes or trailing bytes, we still use a scratch buffer to extract the
requested bytes.

We could go one step further if .word_size was 4, but changing that
would affect the sysfs interface's behavior.

Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
 drivers/nvmem/sunxi_sid.c | 38 ++++++++++++++++++--------------------
 1 file changed, 18 insertions(+), 20 deletions(-)

diff --git a/drivers/nvmem/sunxi_sid.c b/drivers/nvmem/sunxi_sid.c
index 704c35edf796..15fbfab62595 100644
--- a/drivers/nvmem/sunxi_sid.c
+++ b/drivers/nvmem/sunxi_sid.c
@@ -115,36 +115,34 @@ static int sun8i_sid_register_readout(const struct sunxi_sid *sid,
  * to be not reliable at all.
  * Read by the registers instead.
  */
-static int sun8i_sid_read_byte_by_reg(const struct sunxi_sid *sid,
-				      const unsigned int offset,
-				      u8 *out)
-{
-	u32 word;
-	int ret;
-
-	ret = sun8i_sid_register_readout(sid, offset & ~0x03, &word);
-
-	if (ret)
-		return ret;
-
-	*out = (word >> ((offset & 0x3) * 8)) & 0xff;
-
-	return 0;
-}
-
 static int sun8i_sid_read_by_reg(void *context, unsigned int offset,
 				 void *val, size_t bytes)
 {
 	struct sunxi_sid *sid = context;
-	u8 *buf = val;
+	u32 word;
 	int ret;
 
-	while (bytes--) {
-		ret = sun8i_sid_read_byte_by_reg(sid, offset++, buf++);
+	/* .stride = 4 so offset is guaranteed to be aligned */
+	while (bytes >= 4) {
+		ret = sun8i_sid_register_readout(sid, offset, val);
 		if (ret)
 			return ret;
+
+		val += 4;
+		offset += 4;
+		bytes -= 4;
 	}
 
+	if (!bytes)
+		return 0;
+
+	/* Handle any trailing bytes */
+	ret = sun8i_sid_register_readout(sid, offset, &word);
+	if (ret)
+		return ret;
+
+	memcpy(val, &word, bytes);
+
 	return 0;
 }
 
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ