lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Mon, 18 Mar 2019 19:39:36 +0900 From: Chanwoo Choi <cw00.choi@...sung.com> To: Paweł Chmiel <pawel.mikolaj.chmiel@...il.com>, myungjoo.ham@...sung.com Cc: robh+dt@...nel.org, mark.rutland@....com, linux-kernel@...r.kernel.org, devicetree@...r.kernel.org, Tomasz Figa <tomasz.figa@...il.com> Subject: Re: [PATCH 1/2] dt-bindings: extcon: Add support for fsa9480 switch Hi, Sorry for late reply. On 19. 2. 26. 오전 1:58, Paweł Chmiel wrote: > From: Tomasz Figa <tomasz.figa@...il.com> > > This patch adds documentation for binding of extcont Fairchild > Semiconductor FSA9480 microusb switch. > This usb port accessory detector and switch, can be found for example in > some Samsung s5pv210 based phones. > > Signed-off-by: Tomasz Figa <tomasz.figa@...il.com> > Signed-off-by: Paweł Chmiel <pawel.mikolaj.chmiel@...il.com> > --- > .../bindings/extcon/extcon-fsa9480.txt | 21 +++++++++++++++++++ > 1 file changed, 21 insertions(+) > create mode 100644 Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt > > diff --git a/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt > new file mode 100644 > index 000000000000..ebced7b18eb5 > --- /dev/null > +++ b/Documentation/devicetree/bindings/extcon/extcon-fsa9480.txt > @@ -0,0 +1,21 @@ > +FAIRCHILD SEMICONDUCTOR FSA9480 MICROUSB SWITCH > + > +The FSA9480 is a USB port accessory detector and switch. The FSA9480 is fully > +controlled using I2C and enables USB data, stereo and mono audio, video, > +microphone, and UART data to use a common connector port. > + > +Required properties: > + - compatible : Must be "fcs,fsa9480" > + - reg : Specifies i2c slave address. Must be 0x25. > + - interrupt-parent : Phandle to interrupt controller to which interrupt > + signal of the chip is connected. > + - interrupts : Should contain one entry specifying interrupt signal of > + interrupt parent to which interrupt pin of the chip is connected. > + > + Example: > + musb@25 { > + compatible = "fcs,fsa9480"; > + reg = <0x25>; > + interrupt-parent = <&gph2>; > + interrupts = <7 0>; > + }; > \ No newline at end of file > Acked-by: Chanwoo Choi <cw00.choi@...sung.com> -- Best Regards, Chanwoo Choi Samsung Electronics
Powered by blists - more mailing lists