linux-kernel - Re: [PATCH v3 2/2] mmc: sdhci-omap: Don't finish

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 19 Mar 2019 13:37:39 +0530
From:   Kishon Vijay Abraham I <kishon@...com>
To:     Faiz Abbas <faiz_abbas@...com>, <linux-kernel@...r.kernel.org>,
        <linux-mmc@...r.kernel.org>, <linux-omap@...r.kernel.org>
CC:     <ulf.hansson@...aro.org>, <adrian.hunter@...el.com>
Subject: Re: [PATCH v3 2/2] mmc: sdhci-omap: Don't finish_mrq() on a command
 error during tuning

Hi Faiz,

On 19/03/19 12:05 PM, Faiz Abbas wrote:
> commit 5b0d62108b46 ("mmc: sdhci-omap: Add platform specific reset
> callback") skips data resets during tuning operation. Because of this,
> a data error or data finish interrupt might still arrive after a command
> error has been handled and the mrq ended. This ends up with a "mmc0: Got
> data interrupt 0x00000002 even though no data operation was in progress"
> error message.
> 
> Fix this by adding a platform specific callback for sdhci_irq. Mark the
> mrq as a failure but wait for a data interrupt instead of calling
> finish_mrq().
> 
> Signed-off-by: Faiz Abbas <faiz_abbas@...com>
> ---
>  drivers/mmc/host/sdhci-omap.c | 36 +++++++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index b1a66ca3821a..765873dff7ca 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -797,6 +797,41 @@ void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
>  	sdhci_reset(host, mask);
>  }
>  
> +#define CMD_ERR_MASK (SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)
> +#define CMD_MASK (CMD_ERR_MASK | SDHCI_INT_RESPONSE)
> +
> +static irqreturn_t sdhci_omap_irq(struct sdhci_host *host, u32 intmask)
> +{
> +	struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> +	struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
> +
> +	if (omap_host->is_tuning && (intmask & CMD_ERR_MASK)) {
> +
> +		/*
> +		 * Since we are not resetting data lines during tuning
> +		 * operation, data error or data complete interrupts
> +		 * might still arrive. Mark this request as a failure
> +		 * but still wait for the data interrupt
> +		 */
> +		if (intmask & SDHCI_INT_TIMEOUT)

CMD_ERR_MASK doesn't have SDHCI_INT_TIMEOUT. So this will never be true.

Thanks
Kishon