lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 19 Mar 2019 12:04:12 +0000
From:   Dragan Cvetic <dragan.cvetic@...inx.com>
To:     <arnd@...db.de>, <gregkh@...uxfoundation.org>,
        <michal.simek@...inx.com>, <linux-arm-kernel@...ts.infradead.org>
CC:     <linux-kernel@...r.kernel.org>,
        Dragan Cvetic <dragan.cvetic@...inx.com>,
        Derek Kiernan <derek.kiernan@...inx.com>
Subject: [PATCH 00/12] misc: xilinx sd-fec driver

This patchset is adding the full Soft Decision Forward Error
Correction (SD-FEC) driver implementation, driver DT binding and
driver documentation.

Forward Error Correction (FEC) codes such as Low Density Parity
Check (LDPC) and turbo codes provide a means to control errors in
data transmissions over unreliable or noisy communication
channels. The SD-FEC Integrated Block is an optimized block for
soft-decision decoding of these codes. Fixed turbo codes are
supported directly, whereas custom and standardized LDPC codes
are supported through the ability to specify the parity check
matrix through an AXI4-Lite bus or using the optional programmable
(PL)-based support logic. For the further information see
https://www.xilinx.com/support/documentation/ip_documentation/
sd_fec/v1_1/pg256-sdfec-integrated-block.pdf

This driver is a platform device driver which supports SDFEC16
(16nm) IP. SD-FEC driver supports LDPC decoding and encoding and
Turbo code decoding. LDPC codes can be specified on
a codeword-by-codeword basis, also a custom LDPC code can be used.

The SD-FEC driver exposes a char device interface and supports
file operations: open(), close(), poll() and ioctl(). The driver
allows only one usage of the device, open() limits the number of
driver instances. The driver also utilize Common Clock Framework
(CCF).

The control and monitoring is supported over ioctl system call.
The features supported by ioctl():
- enable or disable data pipes to/from device
- configure the FEC algorithm parameters
- set the order of data
- provide a control of a SDFEC bypass option
- activates/deactivates SD-FEC
- collect and provide statistical data
- enable/disable interrupt mode

Poll can be utilized to detect errors on IRQ trigger rather than
using looping status and stats ioctl's.

Reviewed-by: Michal Simek <michal.simek@...inx.com>
Tested-by: Santhosh Dyavanapally <SDYAVANA@...inx.com>
Tested by: Punnaiah Choudary Kalluri <punnaia@...inx.com>
Tested-by: Dragan Cvetic <dragan.cvetic@...inx.com>
Tested-by: Derek Kiernan <derek.kiernan@...inx.com>
Signed-off-by: Derek Kiernan <derek.kiernan@...inx.com>
Signed-off-by: Dragan Cvetic <dragan.cvetic@...inx.com>

Dragan Cvetic (12):
  dt-bindings: xilinx-sdfec: Add SDFEC binding
  misc: xilinx-sdfec: add core driver
  misc: xilinx_sdfec: Add CCF support
  misc: xilinx_sdfec: Add open, close and ioctl
  misc: xilinx_sdfec: Store driver config and state
  misc: xilinx_sdfec: Add ability to configure turbo mode
  misc: xilinx_sdfec: Add ability to configure LDPC
  misc: xilinx_sdfec: Add ability to get/set config
  misc: xilinx_sdfec: Support poll file operation
  misc: xilinx_sdfec: Add stats & status ioctls
  Docs: misc: xilinx_sdfec: Add documentation
  MAINTAINERS: add maintainer for SD-FEC support

 .../devicetree/bindings/misc/xlnx,sd-fec.txt       |   58 +
 Documentation/misc-devices/index.rst               |    1 +
 Documentation/misc-devices/xilinx_sdfec.rst        |  286 ++++
 MAINTAINERS                                        |   12 +
 drivers/misc/Kconfig                               |   12 +
 drivers/misc/Makefile                              |    1 +
 drivers/misc/xilinx_sdfec.c                        | 1683 ++++++++++++++++++++
 include/uapi/misc/xilinx_sdfec.h                   |  470 ++++++
 8 files changed, 2523 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/xlnx,sd-fec.txt
 create mode 100644 Documentation/misc-devices/xilinx_sdfec.rst
 create mode 100644 drivers/misc/xilinx_sdfec.c
 create mode 100644 include/uapi/misc/xilinx_sdfec.h

--
2.7.4

This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ