linux-kernel - [PATCH v6 01/13] dt-bindings: mtd: ingenic: Add compatible strings for JZ4740 and JZ4725B

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190319145403.31627-2-paul@crapouillou.net>
Date:   Tue, 19 Mar 2019 15:53:51 +0100
From:   Paul Cercueil <paul@...pouillou.net>
To:     Miquel Raynal <miquel.raynal@...tlin.com>,
        Harvey Hunt <harveyhuntnexus@...il.com>
Cc:     linux-mtd@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org, Paul Cercueil <paul@...pouillou.net>
Subject: [PATCH v6 01/13] dt-bindings: mtd: ingenic: Add compatible strings for JZ4740 and JZ4725B

Add compatible strings to probe the jz4780-nand and jz4780-bch drivers
from devicetree on the JZ4725B and JZ4740 SoCs from Ingenic.

Signed-off-by: Paul Cercueil <paul@...pouillou.net>
Reviewed-by: Rob Herring <robh@...nel.org>
---

Notes:
    v2: - Change 'ingenic,jz4725b-nand' compatible string to
          'ingenic,jz4740-nand' to reflect driver change
        - Add 'ingenic,jz4740-bch' compatible string
        - Document 'ingenic,oob-layout' property
    
    v3: - Removed 'ingenic,oob-layout' property
        - Update compatible strings to what the driver supports
    
    v4: No change
    
    v5: No change
    
    v6: No change

 Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt | 10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
index 29ea5853ca91..a5b940f18bf6 100644
--- a/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/ingenic,jz4780-nand.txt
@@ -6,7 +6,10 @@ memory-controllers/ingenic,jz4780-nemc.txt), and thus NAND device nodes must
 be children of the NEMC node.
 
 Required NAND controller device properties:
-- compatible: Should be set to "ingenic,jz4780-nand".
+- compatible: Should be one of:
+  * ingenic,jz4740-nand
+  * ingenic,jz4725b-nand
+  * ingenic,jz4780-nand
 - reg: For each bank with a NAND chip attached, should specify a bank number,
   an offset of 0 and a size of 0x1000000 (i.e. the whole NEMC bank).
 
@@ -72,7 +75,10 @@ NAND devices. The following is a description of the device properties for a
 BCH controller.
 
 Required BCH properties:
-- compatible: Should be set to "ingenic,jz4780-bch".
+- compatible: Should be one of:
+  * ingenic,jz4740-ecc
+  * ingenic,jz4725b-bch
+  * ingenic,jz4780-bch
 - reg: Should specify the BCH controller registers location and length.
 - clocks: Clock for the BCH controller.
 
-- 
2.11.0