lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Wed, 20 Mar 2019 20:46:35 +0800
From:   Shawn Guo <shawnguo@...nel.org>
To:     Adam Ford <aford173@...il.com>
Cc:     linux-arm-kernel@...ts.infradead.org,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/3] ARM: DTS: imx6q-logicpd: Fix Analog audio capture

On Wed, Mar 06, 2019 at 08:04:01AM -0600, Adam Ford wrote:
> The original submission had functional audio out and was based
> on reviewing other boards using the same wm8962 codec. However,
> the Logic PD board uses an analog microphone which was being
> disabled for a digital mic.  This patch corrects that and
> explicitly sets the gpio-cfg pins all to 0x0000 which allows the
> analog microphone to capture audio.
> 
> Fixes: 1c207f911fe9 ("ARM: dts: imx: Add support for Logic PD
> i.MX6QD EVM")

If audio capture has never worked, the change is more like a "new feature"
than critical fix.

Shawn

> 
> Signed-off-by: Adam Ford <aford173@...il.com>
> 
> diff --git a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
> index e31b6923cb72..db6b5b900826 100644
> --- a/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
> +++ b/arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi
> @@ -248,9 +248,9 @@
>  		gpio-cfg = <
>  			0x0000 /* 0:Default */
>  			0x0000 /* 1:Default */
> -			0x0013 /* 2:FN_DMICCLK */
> +			0x0000 /* 2:FN_DMICCLK */
>  			0x0000 /* 3:Default */
> -			0x8014 /* 4:FN_DMICCDAT */
> +			0x0000 /* 4:FN_DMICCDAT */
>  			0x0000 /* 5:Default */
>  		>;
>  	};
> -- 
> 2.17.1
> 

Powered by blists - more mailing lists