| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190321233528.16568-2-richard.laing@alliedtelesis.co.nz>
Date: Fri, 22 Mar 2019 12:35:28 +1300
From: Richard Laing <richard.laing@...iedtelesis.co.nz>
To: rjui@...adcom.com, bcm-kernel-feedback-list@...adcom.com
Cc: linux-kernel@...r.kernel.org,
Richard Laing <richard.laing@...iedtelesis.co.nz>
Subject: [PATCH] Add i2c recovery handling for bcm-iproc based devices.
It is possible for the i2c bus to become locked up preventing
communication with devices on the bus, add the hooks required to
allow the existing i2c recovery code to be used to clear the lock up.
Before the recovery can be perfored the device needs to be configured in
the bit-bang mode allow the clock line to be controlled directly by the
i2c_generic_recovery() in i2c-core.c. Access routines are provided to get
and set the clock line state and on completion the device is returned to
normal operations and initialised.
Signed-off-by: Richard Laing <richard.laing@...iedtelesis.co.nz>
---
drivers/i2c/busses/i2c-bcm-iproc.c | 120 +++++++++++++++++++++++++++++++++++++
1 file changed, 120 insertions(+)
diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c
index 4c8c3bc..4cd041b 100644
--- a/drivers/i2c/busses/i2c-bcm-iproc.c
+++ b/drivers/i2c/busses/i2c-bcm-iproc.c
@@ -23,6 +23,7 @@
#define CFG_OFFSET 0x00
#define CFG_RESET_SHIFT 31
#define CFG_EN_SHIFT 30
+#define CFG_BIT_BANG_SHIFT 29
#define CFG_M_RETRY_CNT_SHIFT 16
#define CFG_M_RETRY_CNT_MASK 0x0f
@@ -78,6 +79,11 @@
#define M_RX_DATA_SHIFT 0
#define M_RX_DATA_MASK 0xff
+#define M_BB_CTRL_OFFSET 0x14
+#define M_BB_CTRL_CLK_IN_SHIFT 31
+#define M_BB_CTRL_CLK_SHIFT 30
+#define M_BB_CTRL_DATA_SHIFT 29
+
#define I2C_TIMEOUT_MSEC 50000
#define M_TX_RX_FIFO_SIZE 64
@@ -208,6 +214,117 @@ static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c,
writel(val, iproc_i2c->base + CFG_OFFSET);
}
+/*
+ * Put the i2c controller into reset.
+ */
+static void bcm_iproc_i2c_reset(struct bcm_iproc_i2c_dev *iproc_i2c)
+{
+ u32 tmp;
+
+ tmp = readl(iproc_i2c->base + CFG_OFFSET);
+ tmp |= BIT(CFG_RESET_SHIFT);
+ writel(tmp, iproc_i2c->base + CFG_OFFSET);
+ udelay(100);
+}
+
+/*
+ * Switch to bit bang mode to prepare for i2c generic recovery.
+ */
+static void bcm_iproc_i2c_prepare_recovery(struct i2c_adapter *adap)
+{
+ struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adap);
+ u32 tmp;
+
+ dev_dbg(iproc_i2c->device, "Prepare recovery\n");
+
+ /* Disable interrupts */
+ writel(0, iproc_i2c->base + IE_OFFSET);
+ readl(iproc_i2c->base + IE_OFFSET);
+ synchronize_irq(iproc_i2c->irq);
+
+ bcm_iproc_i2c_reset(iproc_i2c);
+
+ /* Switch to bit-bang mode */
+ tmp = readl(iproc_i2c->base + CFG_OFFSET);
+ tmp |= BIT(CFG_BIT_BANG_SHIFT);
+ writel(tmp, iproc_i2c->base + CFG_OFFSET);
+}
+
+/*
+ * Return to normal i2c operation following recovery.
+ */
+static void bcm_iproc_i2c_unprepare_recovery(struct i2c_adapter *adap)
+{
+ struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adap);
+ u32 tmp;
+
+ /* Switch to normal mode */
+ tmp = readl(iproc_i2c->base + CFG_OFFSET);
+ tmp &= ~BIT(CFG_BIT_BANG_SHIFT);
+ writel(tmp, iproc_i2c->base + CFG_OFFSET);
+ udelay(100);
+
+ bcm_iproc_i2c_init(iproc_i2c);
+ bcm_iproc_i2c_enable_disable(iproc_i2c, true);
+
+ dev_dbg(iproc_i2c->device, "Recovery complete\n");
+}
+
+/*
+ * Return the SCL state, we must be configured in bit bang mode for this
+ * to work.
+ */
+static int bcm_iproc_i2c_get_scl(struct i2c_adapter *adap)
+{
+ struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adap);
+ u32 tmp;
+
+ tmp = readl(iproc_i2c->base + M_BB_CTRL_OFFSET);
+
+ return tmp & BIT(M_BB_CTRL_CLK_IN_SHIFT);
+}
+
+/*
+ * Set the SCL state, we must be configured in bit bang mode for this
+ * to work.
+ */
+static void bcm_iproc_i2c_set_scl(struct i2c_adapter *adap, int val)
+{
+ struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adap);
+ u32 tmp;
+
+ tmp = readl(iproc_i2c->base + M_BB_CTRL_OFFSET);
+ if (val)
+ tmp |= BIT(M_BB_CTRL_CLK_SHIFT);
+ else
+ tmp &= ~BIT(M_BB_CTRL_CLK_SHIFT);
+
+ writel(tmp, iproc_i2c->base + M_BB_CTRL_OFFSET);
+}
+
+/*
+ * Return the SDA state, we must be configured in bit bang mode for this
+ * to work.
+ */
+static int bcm_iproc_i2c_get_sda(struct i2c_adapter *adap)
+{
+ struct bcm_iproc_i2c_dev *iproc_i2c = i2c_get_adapdata(adap);
+ u32 tmp;
+
+ tmp = readl(iproc_i2c->base + M_BB_CTRL_OFFSET);
+
+ return tmp & BIT(M_BB_CTRL_DATA_SHIFT);
+}
+
+static struct i2c_bus_recovery_info bcm_iproc_recovery_info = {
+ .recover_bus = i2c_generic_scl_recovery,
+ .prepare_recovery = bcm_iproc_i2c_prepare_recovery,
+ .unprepare_recovery = bcm_iproc_i2c_unprepare_recovery,
+ .set_scl = bcm_iproc_i2c_set_scl,
+ .get_scl = bcm_iproc_i2c_get_scl,
+ .get_sda = bcm_iproc_i2c_get_sda,
+};
+
static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c,
struct i2c_msg *msg)
{
@@ -261,6 +378,7 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
if (!!(readl(iproc_i2c->base + M_CMD_OFFSET) &
BIT(M_CMD_START_BUSY_SHIFT))) {
dev_warn(iproc_i2c->device, "bus is busy\n");
+ i2c_recover_bus(&iproc_i2c->adapter);
return -EBUSY;
}
@@ -341,6 +459,7 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c,
val = (1 << M_FIFO_RX_FLUSH_SHIFT) |
(1 << M_FIFO_TX_FLUSH_SHIFT);
writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET);
+ i2c_recover_bus(&iproc_i2c->adapter);
return -ETIMEDOUT;
}
@@ -487,6 +606,7 @@ static int bcm_iproc_i2c_probe(struct platform_device *pdev)
adap->quirks = &bcm_iproc_i2c_quirks;
adap->dev.parent = &pdev->dev;
adap->dev.of_node = pdev->dev.of_node;
+ adap->bus_recovery_info = &bcm_iproc_recovery_info;
return i2c_add_adapter(adap);
}
--
2.1.4
Powered by blists - more mailing lists