linux-kernel - [PATCH v7 2/4] Input: goodix

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Thu, 21 Mar 2019 13:51:02 +0530
From:   Jagan Teki <jagan@...rulasolutions.com>
To:     Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Bastien Nocera <hadess@...ess.net>,
        Rob Herring <robh+dt@...nel.org>
Cc:     Henrik Rydberg <rydberg@...math.org>, linux-input@...r.kernel.org,
        linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
        Mark Rutland <mark.rutland@....com>,
        linux-amarula@...rulasolutions.com,
        Michael Trimarchi <michael@...rulasolutions.com>,
        Jagan Teki <jagan@...rulasolutions.com>
Subject: [PATCH v7 2/4] Input: goodix - Add regulators suppot

Goodix CTP controllers require AVDD28, VDDIO regulators for power-on
sequence.

The delay between these regualtor operations as per Power-on Timing
from datasheet[1] is 0 (T1 >= 0 usec).

So, enable and disable these regulators in proper order using normal
regulator functions without any delay in between.

[1] GT5663 Datasheet_English_20151106_Rev.01

Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
---
 drivers/input/touchscreen/goodix.c | 58 ++++++++++++++++++++++++++++++
 1 file changed, 58 insertions(+)

diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
index f57d82220a88..de5b80a08f41 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -27,6 +27,7 @@
 #include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
+#include <linux/regulator/consumer.h>
 #include <linux/slab.h>
 #include <linux/acpi.h>
 #include <linux/of.h>
@@ -47,6 +48,8 @@ struct goodix_ts_data {
 	struct touchscreen_properties prop;
 	unsigned int max_touch_num;
 	unsigned int int_trigger_type;
+	struct regulator *avdd28;
+	struct regulator *vddio;
 	struct gpio_desc *gpiod_int;
 	struct gpio_desc *gpiod_rst;
 	u16 id;
@@ -532,6 +535,24 @@ static int goodix_get_gpio_config(struct goodix_ts_data *ts)
 		return -EINVAL;
 	dev = &ts->client->dev;
 
+	ts->avdd28 = devm_regulator_get(dev, "AVDD28");
+	if (IS_ERR(ts->avdd28)) {
+		error = PTR_ERR(ts->avdd28);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev,
+				"Failed to get AVDD28 regulator: %d\n", error);
+		return error;
+	}
+
+	ts->vddio = devm_regulator_get(dev, "VDDIO");
+	if (IS_ERR(ts->vddio)) {
+		error = PTR_ERR(ts->vddio);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev,
+				"Failed to get VDDIO regulator: %d\n", error);
+		return error;
+	}
+
 	/* Get the interrupt GPIO pin number */
 	gpiod = devm_gpiod_get_optional(dev, GOODIX_GPIO_INT_NAME, GPIOD_IN);
 	if (IS_ERR(gpiod)) {
@@ -764,6 +785,17 @@ static void goodix_config_cb(const struct firmware *cfg, void *ctx)
 	complete_all(&ts->firmware_loading_complete);
 }
 
+static void goodix_disable_regulator(void *arg)
+{
+	struct goodix_ts_data *ts = arg;
+
+	if (!IS_ERR(ts->vddio))
+		regulator_disable(ts->vddio);
+
+	if (!IS_ERR(ts->avdd28))
+		regulator_disable(ts->avdd28);
+}
+
 static int goodix_ts_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
 {
@@ -789,6 +821,32 @@ static int goodix_ts_probe(struct i2c_client *client,
 	if (error)
 		return error;
 
+	error = devm_add_action_or_reset(&client->dev,
+					 goodix_disable_regulator, ts);
+	if (error)
+		return error;
+
+	/* power the controller */
+	if (!IS_ERR(ts->avdd28)) {
+		error = regulator_enable(ts->avdd28);
+		if (error) {
+			dev_err(&client->dev,
+				"Failed to enable AVDD28 regulator: %d\n",
+				error);
+			return error;
+		}
+	}
+
+	if (!IS_ERR(ts->vddio)) {
+		error = regulator_enable(ts->vddio);
+		if (error) {
+			dev_err(&client->dev,
+				"Failed to enable VDDIO regulator: %d\n",
+				error);
+			return error;
+		}
+	}
+
 	if (ts->gpiod_int && ts->gpiod_rst) {
 		/* reset the controller */
 		error = goodix_reset(ts);
-- 
2.18.0.321.gffc6fa0e3