| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190322071122.6677-11-Jason@zx2c4.com>
Date: Fri, 22 Mar 2019 01:11:13 -0600
From: "Jason A. Donenfeld" <Jason@...c4.com>
To: linux-crypto@...r.kernel.org, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org
Cc: "Jason A. Donenfeld" <Jason@...c4.com>,
René van Dorst <opensource@...rst.com>,
Andy Polyakov <appro@...nssl.org>,
Ralf Baechle <ralf@...ux-mips.org>,
Paul Burton <paul.burton@...s.com>,
James Hogan <jhogan@...nel.org>, linux-mips@...ux-mips.org,
Samuel Neves <sneves@....uc.pt>,
Jean-Philippe Aumasson <jeanphilippe.aumasson@...il.com>,
Andy Lutomirski <luto@...nel.org>,
Greg KH <gregkh@...uxfoundation.org>,
Andrew Morton <akpm@...ux-foundation.org>,
Linus Torvalds <torvalds@...ux-foundation.org>,
kernel-hardening@...ts.openwall.com
Subject: [PATCH net-next v9 10/19] zinc: Poly1305 MIPS64 and MIPS32r2 implementations
The MIPS64 accelerated implementation comes from Andy Polyakov's
implementation and provides nice speedups on commodity Octeon hardware.
While this is CRYPTOGAMS code, the originating code for this happens to
be the same as OpenSSL's commit 9925a82146f2503b4dd11423d0eba649b43450c0
This MIPS32r2 implementation comes from René van Dorst and me and
results in a nice speedup on the usual OpenWRT targets.
Signed-off-by: Jason A. Donenfeld <Jason@...c4.com>
Signed-off-by: René van Dorst <opensource@...rst.com>
Co-developed-by: René van Dorst <opensource@...rst.com>
Co-developed-by: Andy Polyakov <appro@...nssl.org>
Cc: Andy Polyakov <appro@...nssl.org>
Cc: Ralf Baechle <ralf@...ux-mips.org>
Cc: Paul Burton <paul.burton@...s.com>
Cc: James Hogan <jhogan@...nel.org>
Cc: linux-mips@...ux-mips.org
Cc: Samuel Neves <sneves@....uc.pt>
Cc: Jean-Philippe Aumasson <jeanphilippe.aumasson@...il.com>
Cc: Andy Lutomirski <luto@...nel.org>
Cc: Greg KH <gregkh@...uxfoundation.org>
Cc: Andrew Morton <akpm@...ux-foundation.org>
Cc: Linus Torvalds <torvalds@...ux-foundation.org>
Cc: kernel-hardening@...ts.openwall.com
Cc: linux-crypto@...r.kernel.org
---
lib/zinc/Makefile | 5 +-
lib/zinc/poly1305/poly1305-mips-glue.c | 37 ++
lib/zinc/poly1305/poly1305-mips.S | 407 +++++++++++++++++++++
lib/zinc/poly1305/poly1305-mips64.pl | 467 +++++++++++++++++++++++++
lib/zinc/poly1305/poly1305.c | 2 +
5 files changed, 917 insertions(+), 1 deletion(-)
create mode 100644 lib/zinc/poly1305/poly1305-mips-glue.c
create mode 100644 lib/zinc/poly1305/poly1305-mips.S
create mode 100644 lib/zinc/poly1305/poly1305-mips64.pl
diff --git a/lib/zinc/Makefile b/lib/zinc/Makefile
index 488c5f2e3078..e1efab61ed31 100644
--- a/lib/zinc/Makefile
+++ b/lib/zinc/Makefile
@@ -15,7 +15,10 @@ zinc_poly1305-y := poly1305/poly1305.o
zinc_poly1305-$(CONFIG_ZINC_ARCH_X86_64) += poly1305/poly1305-x86_64.o
zinc_poly1305-$(CONFIG_ZINC_ARCH_ARM) += poly1305/poly1305-arm.o
zinc_poly1305-$(CONFIG_ZINC_ARCH_ARM64) += poly1305/poly1305-arm64.o
-perlasm-targets += poly1305/poly1305-x86_64.S poly1305/poly1305-arm.S poly1305/poly1305-arm64.S
+zinc_poly1305-$(CONFIG_ZINC_ARCH_MIPS) += poly1305/poly1305-mips.o
+AFLAGS_poly1305-mips.o += -O2 # This is required to fill the branch delay slots
+zinc_poly1305-$(CONFIG_ZINC_ARCH_MIPS64) += poly1305/poly1305-mips64.o
+perlasm-targets += poly1305/poly1305-x86_64.S poly1305/poly1305-arm.S poly1305/poly1305-arm64.S poly1305/poly1305-mips64.S
obj-$(CONFIG_ZINC_POLY1305) += zinc_poly1305.o
quiet_cmd_perlasm = PERLASM $@
diff --git a/lib/zinc/poly1305/poly1305-mips-glue.c b/lib/zinc/poly1305/poly1305-mips-glue.c
new file mode 100644
index 000000000000..a540e9c4eee8
--- /dev/null
+++ b/lib/zinc/poly1305/poly1305-mips-glue.c
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@...c4.com>. All Rights Reserved.
+ */
+
+asmlinkage void poly1305_init_mips(void *ctx, const u8 key[16]);
+asmlinkage void poly1305_blocks_mips(void *ctx, const u8 *inp, const size_t len,
+ const u32 padbit);
+asmlinkage void poly1305_emit_mips(void *ctx, u8 mac[16], const u32 nonce[4]);
+
+static bool *const poly1305_nobs[] __initconst = { };
+static void __init poly1305_fpu_init(void)
+{
+}
+
+static inline bool poly1305_init_arch(void *ctx,
+ const u8 key[POLY1305_KEY_SIZE])
+{
+ poly1305_init_mips(ctx, key);
+ return true;
+}
+
+static inline bool poly1305_blocks_arch(void *ctx, const u8 *inp,
+ size_t len, const u32 padbit,
+ simd_context_t *simd_context)
+{
+ poly1305_blocks_mips(ctx, inp, len, padbit);
+ return true;
+}
+
+static inline bool poly1305_emit_arch(void *ctx, u8 mac[POLY1305_MAC_SIZE],
+ const u32 nonce[4],
+ simd_context_t *simd_context)
+{
+ poly1305_emit_mips(ctx, mac, nonce);
+ return true;
+}
diff --git a/lib/zinc/poly1305/poly1305-mips.S b/lib/zinc/poly1305/poly1305-mips.S
new file mode 100644
index 000000000000..4291c156815b
--- /dev/null
+++ b/lib/zinc/poly1305/poly1305-mips.S
@@ -0,0 +1,407 @@
+/* SPDX-License-Identifier: GPL-2.0 OR MIT */
+/*
+ * Copyright (C) 2016-2018 René van Dorst <opensource@...rst.com> All Rights Reserved.
+ * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@...c4.com>. All Rights Reserved.
+ */
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+#define MSB 0
+#define LSB 3
+#else
+#define MSB 3
+#define LSB 0
+#endif
+
+#define POLY1305_BLOCK_SIZE 16
+.text
+#define H0 $t0
+#define H1 $t1
+#define H2 $t2
+#define H3 $t3
+#define H4 $t4
+
+#define R0 $t5
+#define R1 $t6
+#define R2 $t7
+#define R3 $t8
+
+#define O0 $s0
+#define O1 $s4
+#define O2 $v1
+#define O3 $t9
+#define O4 $s5
+
+#define S1 $s1
+#define S2 $s2
+#define S3 $s3
+
+#define SC $at
+#define CA $v0
+
+/* Input arguments */
+#define poly $a0
+#define src $a1
+#define srclen $a2
+#define hibit $a3
+
+/* Location in the opaque buffer
+ * R[0..3], CA, H[0..4]
+ */
+#define PTR_POLY1305_R(n) ( 0 + (n*4)) ## ($a0)
+#define PTR_POLY1305_CA (16 ) ## ($a0)
+#define PTR_POLY1305_H(n) (20 + (n*4)) ## ($a0)
+
+#define POLY1305_BLOCK_SIZE 16
+#define POLY1305_STACK_SIZE 32
+
+.set noat
+.align 4
+.globl poly1305_blocks_mips
+.ent poly1305_blocks_mips
+poly1305_blocks_mips:
+ .frame $sp, POLY1305_STACK_SIZE, $ra
+ /* srclen &= 0xFFFFFFF0 */
+ ins srclen, $zero, 0, 4
+
+ addiu $sp, -(POLY1305_STACK_SIZE)
+
+ /* check srclen >= 16 bytes */
+ beqz srclen, .Lpoly1305_blocks_mips_end
+
+ /* Calculate last round based on src address pointer.
+ * last round src ptr (srclen) = src + (srclen & 0xFFFFFFF0)
+ */
+ addu srclen, src
+
+ lw R0, PTR_POLY1305_R(0)
+ lw R1, PTR_POLY1305_R(1)
+ lw R2, PTR_POLY1305_R(2)
+ lw R3, PTR_POLY1305_R(3)
+
+ /* store the used save registers. */
+ sw $s0, 0($sp)
+ sw $s1, 4($sp)
+ sw $s2, 8($sp)
+ sw $s3, 12($sp)
+ sw $s4, 16($sp)
+ sw $s5, 20($sp)
+
+ /* load Hx and Carry */
+ lw CA, PTR_POLY1305_CA
+ lw H0, PTR_POLY1305_H(0)
+ lw H1, PTR_POLY1305_H(1)
+ lw H2, PTR_POLY1305_H(2)
+ lw H3, PTR_POLY1305_H(3)
+ lw H4, PTR_POLY1305_H(4)
+
+ /* Sx = Rx + (Rx >> 2) */
+ srl S1, R1, 2
+ srl S2, R2, 2
+ srl S3, R3, 2
+ addu S1, R1
+ addu S2, R2
+ addu S3, R3
+
+ addiu SC, $zero, 1
+
+.Lpoly1305_loop:
+ lwl O0, 0+MSB(src)
+ lwl O1, 4+MSB(src)
+ lwl O2, 8+MSB(src)
+ lwl O3,12+MSB(src)
+ lwr O0, 0+LSB(src)
+ lwr O1, 4+LSB(src)
+ lwr O2, 8+LSB(src)
+ lwr O3,12+LSB(src)
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ wsbh O0
+ wsbh O1
+ wsbh O2
+ wsbh O3
+ rotr O0, 16
+ rotr O1, 16
+ rotr O2, 16
+ rotr O3, 16
+#endif
+
+ /* h0 = (u32)(d0 = (u64)h0 + inp[0] + c 'Carry_previous cycle'); */
+ addu H0, CA
+ sltu CA, H0, CA
+ addu O0, H0
+ sltu H0, O0, H0
+ addu CA, H0
+
+ /* h1 = (u32)(d1 = (u64)h1 + (d0 >> 32) + inp[4]); */
+ addu H1, CA
+ sltu CA, H1, CA
+ addu O1, H1
+ sltu H1, O1, H1
+ addu CA, H1
+
+ /* h2 = (u32)(d2 = (u64)h2 + (d1 >> 32) + inp[8]); */
+ addu H2, CA
+ sltu CA, H2, CA
+ addu O2, H2
+ sltu H2, O2, H2
+ addu CA, H2
+
+ /* h3 = (u32)(d3 = (u64)h3 + (d2 >> 32) + inp[12]); */
+ addu H3, CA
+ sltu CA, H3, CA
+ addu O3, H3
+ sltu H3, O3, H3
+ addu CA, H3
+
+ /* h4 += (u32)(d3 >> 32) + padbit; */
+ addu H4, hibit
+ addu O4, H4, CA
+
+ /* D0 */
+ multu O0, R0
+ maddu O1, S3
+ maddu O2, S2
+ maddu O3, S1
+ mfhi CA
+ mflo H0
+
+ /* D1 */
+ multu O0, R1
+ maddu O1, R0
+ maddu O2, S3
+ maddu O3, S2
+ maddu O4, S1
+ maddu CA, SC
+ mfhi CA
+ mflo H1
+
+ /* D2 */
+ multu O0, R2
+ maddu O1, R1
+ maddu O2, R0
+ maddu O3, S3
+ maddu O4, S2
+ maddu CA, SC
+ mfhi CA
+ mflo H2
+
+ /* D4 */
+ mul H4, O4, R0
+
+ /* D3 */
+ multu O0, R3
+ maddu O1, R2
+ maddu O2, R1
+ maddu O3, R0
+ maddu O4, S3
+ maddu CA, SC
+ mfhi CA
+ mflo H3
+
+ addiu src, POLY1305_BLOCK_SIZE
+
+ /* h4 += (u32)(d3 >> 32); */
+ addu O4, H4, CA
+ /* h4 &= 3 */
+ andi H4, O4, 3
+ /* c = (h4 >> 2) + (h4 & ~3U); */
+ srl CA, O4, 2
+ ins O4, $zero, 0, 2
+
+ addu CA, O4
+
+ /* able to do a 16 byte block. */
+ bne src, srclen, .Lpoly1305_loop
+
+ /* restore the used save registers. */
+ lw $s0, 0($sp)
+ lw $s1, 4($sp)
+ lw $s2, 8($sp)
+ lw $s3, 12($sp)
+ lw $s4, 16($sp)
+ lw $s5, 20($sp)
+
+ /* store Hx and Carry */
+ sw CA, PTR_POLY1305_CA
+ sw H0, PTR_POLY1305_H(0)
+ sw H1, PTR_POLY1305_H(1)
+ sw H2, PTR_POLY1305_H(2)
+ sw H3, PTR_POLY1305_H(3)
+ sw H4, PTR_POLY1305_H(4)
+
+.Lpoly1305_blocks_mips_end:
+ addiu $sp, POLY1305_STACK_SIZE
+
+ /* Jump Back */
+ jr $ra
+.end poly1305_blocks_mips
+.set at
+
+/* Input arguments CTX=$a0, MAC=$a1, NONCE=$a2 */
+#define MAC $a1
+#define NONCE $a2
+
+#define G0 $t5
+#define G1 $t6
+#define G2 $t7
+#define G3 $t8
+#define G4 $t9
+
+.set noat
+.align 4
+.globl poly1305_emit_mips
+.ent poly1305_emit_mips
+poly1305_emit_mips:
+ /* load Hx and Carry */
+ lw CA, PTR_POLY1305_CA
+ lw H0, PTR_POLY1305_H(0)
+ lw H1, PTR_POLY1305_H(1)
+ lw H2, PTR_POLY1305_H(2)
+ lw H3, PTR_POLY1305_H(3)
+ lw H4, PTR_POLY1305_H(4)
+
+ /* Add left over carry */
+ addu H0, CA
+ sltu CA, H0, CA
+ addu H1, CA
+ sltu CA, H1, CA
+ addu H2, CA
+ sltu CA, H2, CA
+ addu H3, CA
+ sltu CA, H3, CA
+ addu H4, CA
+
+ /* compare to modulus by computing h + -p */
+ addiu G0, H0, 5
+ sltu CA, G0, H0
+ addu G1, H1, CA
+ sltu CA, G1, H1
+ addu G2, H2, CA
+ sltu CA, G2, H2
+ addu G3, H3, CA
+ sltu CA, G3, H3
+ addu G4, H4, CA
+
+ srl SC, G4, 2
+
+ /* if there was carry into 131st bit, h3:h0 = g3:g0 */
+ movn H0, G0, SC
+ movn H1, G1, SC
+ movn H2, G2, SC
+ movn H3, G3, SC
+
+ lwl G0, 0+MSB(NONCE)
+ lwl G1, 4+MSB(NONCE)
+ lwl G2, 8+MSB(NONCE)
+ lwl G3,12+MSB(NONCE)
+ lwr G0, 0+LSB(NONCE)
+ lwr G1, 4+LSB(NONCE)
+ lwr G2, 8+LSB(NONCE)
+ lwr G3,12+LSB(NONCE)
+
+ /* mac = (h + nonce) % (2^128) */
+ addu H0, G0
+ sltu CA, H0, G0
+
+ /* H1 */
+ addu H1, CA
+ sltu CA, H1, CA
+ addu H1, G1
+ sltu G1, H1, G1
+ addu CA, G1
+
+ /* H2 */
+ addu H2, CA
+ sltu CA, H2, CA
+ addu H2, G2
+ sltu G2, H2, G2
+ addu CA, G2
+
+ /* H3 */
+ addu H3, CA
+ addu H3, G3
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ wsbh H0
+ wsbh H1
+ wsbh H2
+ wsbh H3
+ rotr H0, 16
+ rotr H1, 16
+ rotr H2, 16
+ rotr H3, 16
+#endif
+
+ /* store MAC */
+ swl H0, 0+MSB(MAC)
+ swl H1, 4+MSB(MAC)
+ swl H2, 8+MSB(MAC)
+ swl H3,12+MSB(MAC)
+ swr H0, 0+LSB(MAC)
+ swr H1, 4+LSB(MAC)
+ swr H2, 8+LSB(MAC)
+ swr H3,12+LSB(MAC)
+
+ jr $ra
+.end poly1305_emit_mips
+
+#define PR0 $t0
+#define PR1 $t1
+#define PR2 $t2
+#define PR3 $t3
+#define PT0 $t4
+
+/* Input arguments CTX=$a0, KEY=$a1 */
+
+.align 4
+.globl poly1305_init_mips
+.ent poly1305_init_mips
+poly1305_init_mips:
+ lwl PR0, 0+MSB($a1)
+ lwl PR1, 4+MSB($a1)
+ lwl PR2, 8+MSB($a1)
+ lwl PR3,12+MSB($a1)
+ lwr PR0, 0+LSB($a1)
+ lwr PR1, 4+LSB($a1)
+ lwr PR2, 8+LSB($a1)
+ lwr PR3,12+LSB($a1)
+
+ /* store Hx and Carry */
+ sw $zero, PTR_POLY1305_CA
+ sw $zero, PTR_POLY1305_H(0)
+ sw $zero, PTR_POLY1305_H(1)
+ sw $zero, PTR_POLY1305_H(2)
+ sw $zero, PTR_POLY1305_H(3)
+ sw $zero, PTR_POLY1305_H(4)
+
+#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
+ wsbh PR0
+ wsbh PR1
+ wsbh PR2
+ wsbh PR3
+ rotr PR0, 16
+ rotr PR1, 16
+ rotr PR2, 16
+ rotr PR3, 16
+#endif
+
+ lui PT0, 0x0FFF
+ ori PT0, 0xFFFC
+
+ /* AND 0x0fffffff; */
+ ext PR0, PR0, 0, (32-4)
+
+ /* AND 0x0ffffffc; */
+ and PR1, PT0
+ and PR2, PT0
+ and PR3, PT0
+
+ /* store Rx */
+ sw PR0, PTR_POLY1305_R(0)
+ sw PR1, PTR_POLY1305_R(1)
+ sw PR2, PTR_POLY1305_R(2)
+ sw PR3, PTR_POLY1305_R(3)
+
+ /* Jump Back */
+ jr $ra
+.end poly1305_init_mips
diff --git a/lib/zinc/poly1305/poly1305-mips64.pl b/lib/zinc/poly1305/poly1305-mips64.pl
new file mode 100644
index 000000000000..d30a03d79177
--- /dev/null
+++ b/lib/zinc/poly1305/poly1305-mips64.pl
@@ -0,0 +1,467 @@
+#!/usr/bin/env perl
+# SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+#
+# This code is taken from the OpenSSL project but the author, Andy Polyakov,
+# has relicensed it under the licenses specified in the SPDX header above.
+# The original headers, including the original license headers, are
+# included below for completeness.
+#
+# ====================================================================
+# Written by Andy Polyakov <appro@...nssl.org> for the OpenSSL
+# project. The module is, however, dual licensed under OpenSSL and
+# CRYPTOGAMS licenses depending on where you obtain it. For further
+# details see http://www.openssl.org/~appro/cryptogams/.
+# ====================================================================
+#
+# Poly1305 hash for MIPS64.
+#
+# May 2016
+#
+# Numbers are cycles per processed byte with poly1305_blocks alone.
+#
+# IALU/gcc
+# R1x000 5.64/+120% (big-endian)
+# Octeon II 3.80/+280% (little-endian)
+
+######################################################################
+# There is a number of MIPS ABI in use, O32 and N32/64 are most
+# widely used. Then there is a new contender: NUBI. It appears that if
+# one picks the latter, it's possible to arrange code in ABI neutral
+# manner. Therefore let's stick to NUBI register layout:
+#
+($zero,$at,$t0,$t1,$t2)=map("\$$_",(0..2,24,25));
+($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7,$s8,$s9,$s10,$s11)=map("\$$_",(12..23));
+($gp,$tp,$sp,$fp,$ra)=map("\$$_",(3,28..31));
+#
+# The return value is placed in $a0. Following coding rules facilitate
+# interoperability:
+#
+# - never ever touch $tp, "thread pointer", former $gp [o32 can be
+# excluded from the rule, because it's specified volatile];
+# - copy return value to $t0, former $v0 [or to $a0 if you're adapting
+# old code];
+# - on O32 populate $a4-$a7 with 'lw $aN,4*N($sp)' if necessary;
+#
+# For reference here is register layout for N32/64 MIPS ABIs:
+#
+# ($zero,$at,$v0,$v1)=map("\$$_",(0..3));
+# ($a0,$a1,$a2,$a3,$a4,$a5,$a6,$a7)=map("\$$_",(4..11));
+# ($t0,$t1,$t2,$t3,$t8,$t9)=map("\$$_",(12..15,24,25));
+# ($s0,$s1,$s2,$s3,$s4,$s5,$s6,$s7)=map("\$$_",(16..23));
+# ($gp,$sp,$fp,$ra)=map("\$$_",(28..31));
+#
+# <appro@...nssl.org>
+#
+######################################################################
+
+$flavour = shift || "64"; # supported flavours are o32,n32,64,nubi32,nubi64
+
+die "MIPS64 only" unless ($flavour =~ /64|n32/i);
+
+$v0 = ($flavour =~ /nubi/i) ? $a0 : $t0;
+$SAVED_REGS_MASK = ($flavour =~ /nubi/i) ? "0x0003f000" : "0x00030000";
+
+($ctx,$inp,$len,$padbit) = ($a0,$a1,$a2,$a3);
+($in0,$in1,$tmp0,$tmp1,$tmp2,$tmp3,$tmp4) = ($a4,$a5,$a6,$a7,$at,$t0,$t1);
+
+$code.=<<___;
+#if (defined(_MIPS_ARCH_MIPS64R3) || defined(_MIPS_ARCH_MIPS64R5) || \\
+ defined(_MIPS_ARCH_MIPS64R6)) \\
+ && !defined(_MIPS_ARCH_MIPS64R2)
+# define _MIPS_ARCH_MIPS64R2
+#endif
+
+#if defined(_MIPS_ARCH_MIPS64R6)
+# define dmultu(rs,rt)
+# define mflo(rd,rs,rt) dmulu rd,rs,rt
+# define mfhi(rd,rs,rt) dmuhu rd,rs,rt
+#else
+# define dmultu(rs,rt) dmultu rs,rt
+# define mflo(rd,rs,rt) mflo rd
+# define mfhi(rd,rs,rt) mfhi rd
+#endif
+
+#ifdef __KERNEL__
+# define poly1305_init poly1305_init_mips
+# define poly1305_blocks poly1305_blocks_mips
+# define poly1305_emit poly1305_emit_mips
+#endif
+
+#if defined(__MIPSEB__) && !defined(MIPSEB)
+# define MIPSEB
+#endif
+
+#ifdef MIPSEB
+# define MSB 0
+# define LSB 7
+#else
+# define MSB 7
+# define LSB 0
+#endif
+
+.text
+.set noat
+.set noreorder
+
+.align 5
+.globl poly1305_init
+.ent poly1305_init
+poly1305_init:
+ .frame $sp,0,$ra
+ .set reorder
+
+ sd $zero,0($ctx)
+ sd $zero,8($ctx)
+ sd $zero,16($ctx)
+
+ beqz $inp,.Lno_key
+
+#if defined(_MIPS_ARCH_MIPS64R6)
+ ld $in0,0($inp)
+ ld $in1,8($inp)
+#else
+ ldl $in0,0+MSB($inp)
+ ldl $in1,8+MSB($inp)
+ ldr $in0,0+LSB($inp)
+ ldr $in1,8+LSB($inp)
+#endif
+#ifdef MIPSEB
+# if defined(_MIPS_ARCH_MIPS64R2)
+ dsbh $in0,$in0 # byte swap
+ dsbh $in1,$in1
+ dshd $in0,$in0
+ dshd $in1,$in1
+# else
+ ori $tmp0,$zero,0xFF
+ dsll $tmp2,$tmp0,32
+ or $tmp0,$tmp2 # 0x000000FF000000FF
+
+ and $tmp1,$in0,$tmp0 # byte swap
+ and $tmp3,$in1,$tmp0
+ dsrl $tmp2,$in0,24
+ dsrl $tmp4,$in1,24
+ dsll $tmp1,24
+ dsll $tmp3,24
+ and $tmp2,$tmp0
+ and $tmp4,$tmp0
+ dsll $tmp0,8 # 0x0000FF000000FF00
+ or $tmp1,$tmp2
+ or $tmp3,$tmp4
+ and $tmp2,$in0,$tmp0
+ and $tmp4,$in1,$tmp0
+ dsrl $in0,8
+ dsrl $in1,8
+ dsll $tmp2,8
+ dsll $tmp4,8
+ and $in0,$tmp0
+ and $in1,$tmp0
+ or $tmp1,$tmp2
+ or $tmp3,$tmp4
+ or $in0,$tmp1
+ or $in1,$tmp3
+ dsrl $tmp1,$in0,32
+ dsrl $tmp3,$in1,32
+ dsll $in0,32
+ dsll $in1,32
+ or $in0,$tmp1
+ or $in1,$tmp3
+# endif
+#endif
+ li $tmp0,1
+ dsll $tmp0,32
+ daddiu $tmp0,-63
+ dsll $tmp0,28
+ daddiu $tmp0,-1 # 0ffffffc0fffffff
+
+ and $in0,$tmp0
+ daddiu $tmp0,-3 # 0ffffffc0ffffffc
+ and $in1,$tmp0
+
+ sd $in0,24($ctx)
+ dsrl $tmp0,$in1,2
+ sd $in1,32($ctx)
+ daddu $tmp0,$in1 # s1 = r1 + (r1 >> 2)
+ sd $tmp0,40($ctx)
+
+.Lno_key:
+ li $v0,0 # return 0
+ jr $ra
+.end poly1305_init
+___
+{
+my ($h0,$h1,$h2,$r0,$r1,$s1,$d0,$d1,$d2) =
+ ($s0,$s1,$s2,$s3,$s4,$s5,$in0,$in1,$t2);
+
+$code.=<<___;
+.align 5
+.globl poly1305_blocks
+.ent poly1305_blocks
+poly1305_blocks:
+ .set noreorder
+ dsrl $len,4 # number of complete blocks
+ bnez $len,poly1305_blocks_internal
+ nop
+ jr $ra
+ nop
+.end poly1305_blocks
+
+.align 5
+.ent poly1305_blocks_internal
+poly1305_blocks_internal:
+ .frame $sp,6*8,$ra
+ .mask $SAVED_REGS_MASK,-8
+ .set noreorder
+ dsubu $sp,6*8
+ sd $s5,40($sp)
+ sd $s4,32($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi prologue
+ sd $s3,24($sp)
+ sd $s2,16($sp)
+ sd $s1,8($sp)
+ sd $s0,0($sp)
+___
+$code.=<<___;
+ .set reorder
+
+ ld $h0,0($ctx) # load hash value
+ ld $h1,8($ctx)
+ ld $h2,16($ctx)
+
+ ld $r0,24($ctx) # load key
+ ld $r1,32($ctx)
+ ld $s1,40($ctx)
+
+.Loop:
+#if defined(_MIPS_ARCH_MIPS64R6)
+ ld $in0,0($inp) # load input
+ ld $in1,8($inp)
+#else
+ ldl $in0,0+MSB($inp) # load input
+ ldl $in1,8+MSB($inp)
+ ldr $in0,0+LSB($inp)
+ ldr $in1,8+LSB($inp)
+#endif
+ daddiu $len,-1
+ daddiu $inp,16
+#ifdef MIPSEB
+# if defined(_MIPS_ARCH_MIPS64R2)
+ dsbh $in0,$in0 # byte swap
+ dsbh $in1,$in1
+ dshd $in0,$in0
+ dshd $in1,$in1
+# else
+ ori $tmp0,$zero,0xFF
+ dsll $tmp2,$tmp0,32
+ or $tmp0,$tmp2 # 0x000000FF000000FF
+
+ and $tmp1,$in0,$tmp0 # byte swap
+ and $tmp3,$in1,$tmp0
+ dsrl $tmp2,$in0,24
+ dsrl $tmp4,$in1,24
+ dsll $tmp1,24
+ dsll $tmp3,24
+ and $tmp2,$tmp0
+ and $tmp4,$tmp0
+ dsll $tmp0,8 # 0x0000FF000000FF00
+ or $tmp1,$tmp2
+ or $tmp3,$tmp4
+ and $tmp2,$in0,$tmp0
+ and $tmp4,$in1,$tmp0
+ dsrl $in0,8
+ dsrl $in1,8
+ dsll $tmp2,8
+ dsll $tmp4,8
+ and $in0,$tmp0
+ and $in1,$tmp0
+ or $tmp1,$tmp2
+ or $tmp3,$tmp4
+ or $in0,$tmp1
+ or $in1,$tmp3
+ dsrl $tmp1,$in0,32
+ dsrl $tmp3,$in1,32
+ dsll $in0,32
+ dsll $in1,32
+ or $in0,$tmp1
+ or $in1,$tmp3
+# endif
+#endif
+ daddu $h0,$in0 # accumulate input
+ daddu $h1,$in1
+ sltu $tmp0,$h0,$in0
+ sltu $tmp1,$h1,$in1
+ daddu $h1,$tmp0
+
+ dmultu ($r0,$h0) # h0*r0
+ daddu $h2,$padbit
+ sltu $tmp0,$h1,$tmp0
+ mflo ($d0,$r0,$h0)
+ mfhi ($d1,$r0,$h0)
+
+ dmultu ($s1,$h1) # h1*5*r1
+ daddu $tmp0,$tmp1
+ daddu $h2,$tmp0
+ mflo ($tmp0,$s1,$h1)
+ mfhi ($tmp1,$s1,$h1)
+
+ dmultu ($r1,$h0) # h0*r1
+ daddu $d0,$tmp0
+ daddu $d1,$tmp1
+ mflo ($tmp2,$r1,$h0)
+ mfhi ($d2,$r1,$h0)
+ sltu $tmp0,$d0,$tmp0
+ daddu $d1,$tmp0
+
+ dmultu ($r0,$h1) # h1*r0
+ daddu $d1,$tmp2
+ sltu $tmp2,$d1,$tmp2
+ mflo ($tmp0,$r0,$h1)
+ mfhi ($tmp1,$r0,$h1)
+ daddu $d2,$tmp2
+
+ dmultu ($s1,$h2) # h2*5*r1
+ daddu $d1,$tmp0
+ daddu $d2,$tmp1
+ mflo ($tmp2,$s1,$h2)
+
+ dmultu ($r0,$h2) # h2*r0
+ sltu $tmp0,$d1,$tmp0
+ daddu $d2,$tmp0
+ mflo ($tmp3,$r0,$h2)
+
+ daddu $d1,$tmp2
+ daddu $d2,$tmp3
+ sltu $tmp2,$d1,$tmp2
+ daddu $d2,$tmp2
+
+ li $tmp0,-4 # final reduction
+ and $tmp0,$d2
+ dsrl $tmp1,$d2,2
+ andi $h2,$d2,3
+ daddu $tmp0,$tmp1
+ daddu $h0,$d0,$tmp0
+ sltu $tmp0,$h0,$tmp0
+ daddu $h1,$d1,$tmp0
+ sltu $tmp0,$h1,$tmp0
+ daddu $h2,$h2,$tmp0
+
+ bnez $len,.Loop
+
+ sd $h0,0($ctx) # store hash value
+ sd $h1,8($ctx)
+ sd $h2,16($ctx)
+
+ .set noreorder
+ ld $s5,40($sp) # epilogue
+ ld $s4,32($sp)
+___
+$code.=<<___ if ($flavour =~ /nubi/i); # optimize non-nubi epilogue
+ ld $s3,24($sp)
+ ld $s2,16($sp)
+ ld $s1,8($sp)
+ ld $s0,0($sp)
+___
+$code.=<<___;
+ jr $ra
+ daddu $sp,6*8
+.end poly1305_blocks_internal
+___
+}
+{
+my ($ctx,$mac,$nonce) = ($a0,$a1,$a2);
+
+$code.=<<___;
+.align 5
+.globl poly1305_emit
+.ent poly1305_emit
+poly1305_emit:
+ .frame $sp,0,$ra
+ .set reorder
+
+ ld $tmp0,0($ctx)
+ ld $tmp1,8($ctx)
+ ld $tmp2,16($ctx)
+
+ daddiu $in0,$tmp0,5 # compare to modulus
+ sltiu $tmp3,$in0,5
+ daddu $in1,$tmp1,$tmp3
+ sltu $tmp3,$in1,$tmp3
+ daddu $tmp2,$tmp2,$tmp3
+
+ dsrl $tmp2,2 # see if it carried/borrowed
+ dsubu $tmp2,$zero,$tmp2
+ nor $tmp3,$zero,$tmp2
+
+ and $in0,$tmp2
+ and $tmp0,$tmp3
+ and $in1,$tmp2
+ and $tmp1,$tmp3
+ or $in0,$tmp0
+ or $in1,$tmp1
+
+ lwu $tmp0,0($nonce) # load nonce
+ lwu $tmp1,4($nonce)
+ lwu $tmp2,8($nonce)
+ lwu $tmp3,12($nonce)
+ dsll $tmp1,32
+ dsll $tmp3,32
+ or $tmp0,$tmp1
+ or $tmp2,$tmp3
+
+ daddu $in0,$tmp0 # accumulate nonce
+ daddu $in1,$tmp2
+ sltu $tmp0,$in0,$tmp0
+ daddu $in1,$tmp0
+
+ dsrl $tmp0,$in0,8 # write mac value
+ dsrl $tmp1,$in0,16
+ dsrl $tmp2,$in0,24
+ sb $in0,0($mac)
+ dsrl $tmp3,$in0,32
+ sb $tmp0,1($mac)
+ dsrl $tmp0,$in0,40
+ sb $tmp1,2($mac)
+ dsrl $tmp1,$in0,48
+ sb $tmp2,3($mac)
+ dsrl $tmp2,$in0,56
+ sb $tmp3,4($mac)
+ dsrl $tmp3,$in1,8
+ sb $tmp0,5($mac)
+ dsrl $tmp0,$in1,16
+ sb $tmp1,6($mac)
+ dsrl $tmp1,$in1,24
+ sb $tmp2,7($mac)
+
+ sb $in1,8($mac)
+ dsrl $tmp2,$in1,32
+ sb $tmp3,9($mac)
+ dsrl $tmp3,$in1,40
+ sb $tmp0,10($mac)
+ dsrl $tmp0,$in1,48
+ sb $tmp1,11($mac)
+ dsrl $tmp1,$in1,56
+ sb $tmp2,12($mac)
+ sb $tmp3,13($mac)
+ sb $tmp0,14($mac)
+ sb $tmp1,15($mac)
+
+ jr $ra
+.end poly1305_emit
+.rdata
+.align 2
+___
+}
+
+open SELF,$0;
+while(<SELF>) {
+ next if (/^#!/);
+ last if (!s/^#/\/\// and !/^$/);
+ print;
+}
+close SELF;
+
+$output=pop and open STDOUT,">$output";
+print $code;
+close STDOUT;
+
diff --git a/lib/zinc/poly1305/poly1305.c b/lib/zinc/poly1305/poly1305.c
index 5cfe4a32514f..48e8f75c52da 100644
--- a/lib/zinc/poly1305/poly1305.c
+++ b/lib/zinc/poly1305/poly1305.c
@@ -20,6 +20,8 @@
#include "poly1305-x86_64-glue.c"
#elif defined(CONFIG_ZINC_ARCH_ARM) || defined(CONFIG_ZINC_ARCH_ARM64)
#include "poly1305-arm-glue.c"
+#elif defined(CONFIG_ZINC_ARCH_MIPS) || defined(CONFIG_ZINC_ARCH_MIPS64)
+#include "poly1305-mips-glue.c"
#else
static inline bool poly1305_init_arch(void *ctx,
const u8 key[POLY1305_KEY_SIZE])
--
2.21.0
Powered by blists - more mailing lists