linux-kernel - [PATCH V3 1/3] dt-bindings: hwmon: Add tachometer interrupt to pwm-fan

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1553243043-19486-2-git-send-email-stefan.wahren@i2se.com>
Date:   Fri, 22 Mar 2019 09:24:01 +0100
From:   Stefan Wahren <stefan.wahren@...e.com>
To:     Kamil Debski <kamil@...as.org>,
        Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>,
        Jean Delvare <jdelvare@...e.com>,
        Guenter Roeck <linux@...ck-us.net>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Robin Murphy <robin.murphy@....com>
Cc:     linux-hwmon@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org,
        Stefan Wahren <stefan.wahren@...e.com>
Subject: [PATCH V3 1/3] dt-bindings: hwmon: Add tachometer interrupt to pwm-fan

This adds the tachometer interrupt to the pwm-fan binding, which is
necessary for RPM support.

Signed-off-by: Stefan Wahren <stefan.wahren@...e.com>
---
 .../devicetree/bindings/hwmon/pwm-fan.txt          | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
index 49ca5d8..722005f 100644
--- a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
+++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt
@@ -7,7 +7,16 @@ Required properties:
 			which correspond to thermal cooling states
 
 Optional properties:
-- fan-supply    : phandle to the regulator that provides power to the fan
+- fan-supply		: phandle to the regulator that provides power to the fan
+- interrupts		: This contains a single interrupt specifier which
+			  describes the tachometer output of the fan as an
+			  interrupt source. The output signal must generate a
+			  defined number of interrupts per fan revolution, which
+			  require that it must be self resetting edge interrupts.
+			  See interrupt-controller/interrupts.txt for the format.
+- pulses-per-revolution : define the tachometer pulses per fan revolution as
+			  an integer (default is 2 interrupts per revolution).
+			  The value must be greater than zero.
 
 Example:
 	fan0: pwm-fan {
@@ -38,3 +47,14 @@ Example:
 					};
 			     };
 		};
+
+Example 2:
+	fan0: pwm-fan {
+		fan0: pwm-fan {
+		compatible = "pwm-fan";
+		pwms = <&pwm 0 40000 0>;
+		fan-supply = <&reg_fan>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		pulses-per-revolution = <2>;
+	};
-- 
2.7.4