linux-kernel - [PATCH] ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY disconnect

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1553506240-2584-1-git-send-email-vladimir.oltean@nxp.com>
Date:   Mon, 25 Mar 2019 09:30:58 +0000
From:   Vladimir Oltean <vladimir.oltean@....com>
To:     "shawnguo@...nel.org" <shawnguo@...nel.org>,
        Leo Li <leoyang.li@....com>,
        Claudiu Manoil <claudiu.manoil@....com>
CC:     "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "netdev@...r.kernel.org" <netdev@...r.kernel.org>,
        "davem@...emloft.net" <davem@...emloft.net>,
        Vladimir Oltean <vladimir.oltean@....com>
Subject: [PATCH] ARM: dts: ls1021: Fix SGMII PCS link remaining down after PHY
 disconnect

Each eTSEC MAC has its own TBI (SGMII) PCS and private MDIO bus.
But due to a DTS oversight, both SGMII-compatible MACs of the LS1021 SoC
are pointing towards the same internal PCS. Therefore nobody is
controlling the internal PCS of eTSEC0.

Upon initial ndo_open, the SGMII link is ok by virtue of U-boot
initialization. But upon an ifdown/ifup sequence, the code path from
ndo_open -> init_phy -> gfar_configure_serdes does not get executed for
the PCS of eTSEC0 (and is executed twice for MAC eTSEC1). So the SGMII
link remains down for eTSEC0. On the LS1021A-TWR board, to signal this
failure condition, the PHY driver keeps printing
'803x_aneg_done: SGMII link is not ok'.

Fixes: 055223d4d22d ("ARM: dts: ls1021a: Enable the eTSEC ports on QDS and TWR")
Signed-off-by: Vladimir Oltean <vladimir.oltean@....com>
---
 arch/arm/boot/dts/ls1021a-twr.dts | 9 ++++++++-
 arch/arm/boot/dts/ls1021a.dtsi    | 9 +++++++++
 2 files changed, 17 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts
index 97e1fb7..9b1fe99 100644
--- a/arch/arm/boot/dts/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/ls1021a-twr.dts
@@ -145,7 +145,7 @@
 };
 
 &enet0 {
-	tbi-handle = <&tbi1>;
+	tbi-handle = <&tbi0>;
 	phy-handle = <&sgmii_phy2>;
 	phy-connection-type = "sgmii";
 	status = "okay";
@@ -225,6 +225,13 @@
 	sgmii_phy2: ethernet-phy@2 {
 		reg = <0x2>;
 	};
+	tbi0: tbi-phy@1f {
+		reg = <0x1f>;
+		device_type = "tbi-phy";
+	};
+};
+
+&mdio1 {
 	tbi1: tbi-phy@1f {
 		reg = <0x1f>;
 		device_type = "tbi-phy";
diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
index b4f2723..3a3d264 100644
--- a/arch/arm/boot/dts/ls1021a.dtsi
+++ b/arch/arm/boot/dts/ls1021a.dtsi
@@ -709,6 +709,15 @@
 			      <0x0 0x2d10030 0x0 0x4>;
 		};
 
+		mdio1: mdio@...4000 {
+			compatible = "gianfar";
+			device_type = "mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x2d64000 0x0 0x4000>,
+			      <0x0 0x2d50030 0x0 0x4>;
+		};
+
 		ptp_clock@...0e00 {
 			compatible = "fsl,etsec-ptp";
 			reg = <0x0 0x2d10e00 0x0 0xb0>;
-- 
2.7.4