lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190325111200.15940-2-jbrunet@baylibre.com>
Date:   Mon, 25 Mar 2019 12:11:57 +0100
From:   Jerome Brunet <jbrunet@...libre.com>
To:     Neil Armstrong <narmstrong@...libre.com>
Cc:     Jerome Brunet <jbrunet@...libre.com>,
        linux-amlogic@...ts.infradead.org, linux-clk@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 1/4] clk: meson: mpll: add init callback and regs

Until now (gx and axg), the mpll setting on boot (whatever the
bootloader) was good enough generate a clean fractional division.

It is not the case on the g12a. While moving away from the vendor u-boot,
it was noticed the fractional part of the divider was no longer applied.
Like on the pll, some magic settings need to applied on the mpll
register.

This change adds the ability to do that on the mpll driver.

Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
 drivers/clk/meson/clk-mpll.c | 33 +++++++++++++++++++++++----------
 drivers/clk/meson/clk-mpll.h |  2 ++
 2 files changed, 25 insertions(+), 10 deletions(-)

diff --git a/drivers/clk/meson/clk-mpll.c b/drivers/clk/meson/clk-mpll.c
index f76850d99e59..64d31c8ba3d0 100644
--- a/drivers/clk/meson/clk-mpll.c
+++ b/drivers/clk/meson/clk-mpll.c
@@ -115,21 +115,12 @@ static int mpll_set_rate(struct clk_hw *hw,
 	else
 		__acquire(mpll->lock);
 
-	/* Enable and set the fractional part */
+	/* Set the fractional part */
 	meson_parm_write(clk->map, &mpll->sdm, sdm);
-	meson_parm_write(clk->map, &mpll->sdm_en, 1);
-
-	/* Set additional fractional part enable if required */
-	if (MESON_PARM_APPLICABLE(&mpll->ssen))
-		meson_parm_write(clk->map, &mpll->ssen, 1);
 
 	/* Set the integer divider part */
 	meson_parm_write(clk->map, &mpll->n2, n2);
 
-	/* Set the magic misc bit if required */
-	if (MESON_PARM_APPLICABLE(&mpll->misc))
-		meson_parm_write(clk->map, &mpll->misc, 1);
-
 	if (mpll->lock)
 		spin_unlock_irqrestore(mpll->lock, flags);
 	else
@@ -138,6 +129,27 @@ static int mpll_set_rate(struct clk_hw *hw,
 	return 0;
 }
 
+static void mpll_init(struct clk_hw *hw)
+{
+	struct clk_regmap *clk = to_clk_regmap(hw);
+	struct meson_clk_mpll_data *mpll = meson_clk_mpll_data(clk);
+
+	if (mpll->init_count)
+		regmap_multi_reg_write(clk->map, mpll->init_regs,
+				       mpll->init_count);
+
+	/* Enable the fractional part */
+	meson_parm_write(clk->map, &mpll->sdm_en, 1);
+
+	/* Set additional fractional part enable if required */
+	if (MESON_PARM_APPLICABLE(&mpll->ssen))
+		meson_parm_write(clk->map, &mpll->ssen, 1);
+
+	/* Set the magic misc bit if required */
+	if (MESON_PARM_APPLICABLE(&mpll->misc))
+		meson_parm_write(clk->map, &mpll->misc, 1);
+}
+
 const struct clk_ops meson_clk_mpll_ro_ops = {
 	.recalc_rate	= mpll_recalc_rate,
 	.round_rate	= mpll_round_rate,
@@ -148,6 +160,7 @@ const struct clk_ops meson_clk_mpll_ops = {
 	.recalc_rate	= mpll_recalc_rate,
 	.round_rate	= mpll_round_rate,
 	.set_rate	= mpll_set_rate,
+	.init		= mpll_init,
 };
 EXPORT_SYMBOL_GPL(meson_clk_mpll_ops);
 
diff --git a/drivers/clk/meson/clk-mpll.h b/drivers/clk/meson/clk-mpll.h
index cf79340006dd..2925fb939fdd 100644
--- a/drivers/clk/meson/clk-mpll.h
+++ b/drivers/clk/meson/clk-mpll.h
@@ -18,6 +18,8 @@ struct meson_clk_mpll_data {
 	struct parm n2;
 	struct parm ssen;
 	struct parm misc;
+	const struct reg_sequence *init_regs;
+	unsigned int init_count;
 	spinlock_t *lock;
 	u8 flags;
 };
-- 
2.20.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ