lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56e3d3d8-700d-867b-b23c-06da2248ebdc@free.fr>
Date:   Mon, 25 Mar 2019 13:05:37 +0100
From:   Marc Gonzalez <marc.w.gonzalez@...e.fr>
To:     Bjorn Andersson <bjorn.andersson@...aro.org>,
        Andy Gross <andy.gross@...aro.org>
Cc:     MSM <linux-arm-msm@...r.kernel.org>,
        SCSI <linux-scsi@...r.kernel.org>,
        Jeffrey Hugo <jhugo@...eaurora.org>,
        David Brown <david.brown@...aro.org>,
        Alim Akhtar <alim.akhtar@...sung.com>,
        Avri Altman <avri.altman@....com>,
        Pedro Sousa <pedrom.sousa@...opsys.com>,
        LKML <linux-kernel@...r.kernel.org>,
        Lee Jones <lee.jones@...aro.org>
Subject: Re: [PATCH v5 0/3] UFS on APQ8098/MSM8998

Hello,

What is the status for this series?
https://patchwork.kernel.org/project/linux-arm-msm/list/?series=84611

Regards.

On 25/02/2019 13:16, Marc Gonzalez wrote:

> Hello,
> 
> This series adds support for the UFS host controller on APQ8098/MSM8998-based boards.
> 
> This should be the final rev ;-)
> 
> Differences between v4 and v5:
> - Drop patches that have already been accepted or spun off
> 
> Differences between v3 and v4:
> - Rebase on top of -next
> - Pick up Douglas Anderson's UFSHC doc fix
> - Document 8998 UFSHC binding
> - Improve UFS PHY binding doc
> - Put the UFS DT patch at the end of the series
> 
> Difference between v2 and v3:
> - Add qcom,msm8998-qmp-ufs-phy compat string and match it in the PHY driver
> - Drop vdd-hba-fixed-regulator
> - Write the reg addresses with full 32-bit width
> - Set regulator-allow-set-load only on the 3 rails used by UFS.
> - Revert the patch introducing ufshcd_set_vccq_rail_unused
> 
> Difference between v1 and v2:
> - New patch to add 'regulator-allow-set-load' prop to all vreg nodes
> - Rename rpmcc node to 'clock-controller' + Add Review tags
> - Drop UFS pinctrl gymnastics (not required, probably left enabled in bootloader)
> - Delete GCC_UFS_ICE_CORE_CLK (ICE not used upstream, I think)
> - Fix sizes of ufsphy register areas based on Jeffrey's feedback
> - Hack ufshcd_set_vccq_rail_unused into a NOP to work around lock up + reboot
> 
> 
> Marc Gonzalez (3):
>   dt-bindings: ufs: Add msm8998 compatible string
>   arm64: dts: qcom: msm8998: Allow UFSHC driver to set-load
>   arm64: dts: qcom: msm8998: Add UFS nodes
> 
>  .../devicetree/bindings/ufs/ufshcd-pltfrm.txt |  1 +
>  arch/arm64/boot/dts/qcom/msm8998-mtp.dtsi     | 22 +++++++
>  arch/arm64/boot/dts/qcom/msm8998.dtsi         | 65 +++++++++++++++++++
>  3 files changed, 88 insertions(+)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ