[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20190325124803.28904-1-gregory.clement@bootlin.com>
Date: Mon, 25 Mar 2019 13:47:57 +0100
From: Gregory CLEMENT <gregory.clement@...tlin.com>
To: Stephen Boyd <sboyd@...eaurora.org>,
Mike Turquette <mturquette@...libre.com>,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
Jason Cooper <jason@...edaemon.net>,
Andrew Lunn <andrew@...n.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
Gregory CLEMENT <gregory.clement@...tlin.com>,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
linux-arm-kernel@...ts.infradead.org,
Antoine Tenart <antoine.tenart@...tlin.com>,
Miquèl Raynal <miquel.raynal@...tlin.com>,
Maxime Chevallier <maxime.chevallier@...tlin.com>
Subject: [PATCH v4 0/6] Add CPU clock support for Armada 7K/8K
Hello,
This is the forth version of a series allowing to manage the cpu clock
for Armada 7K/8K. The third version was sent more than 3 months
without any relevant feedback since this end of decembe last year.
For these SoCs, the CPUs share the same clock by cluster, so actually
the clock management is done at cluster level.
As for the other Armada 7K/8K clocks it is possible to have multiple
AP so here again we need to have unique name: the purpose of the second
patch is to share a common code which will be used in 3 drivers.
The last 2 patch enable the driver at dt and platform level and will
be applied through the mvebu subsystem.
Changelog v3->v4:
- Rebased on v5.1-rc1
- Mention in the binding that a reg property can be used to make the
device tree maintainer happy in the hope that there will be finally
a review on this patch blocking the whole series.
Changelog v2->v3:
- Add back the first patch documenting the binding
Changelog v1->v2:
- Header cleanup
- Use unsigned int instead of it for cluster member of the ap_cpu_clk struct
- Use clk_hw instead of clk
- Use regmap_read_poll_timeout
- Use for_each_of_cpu_node
- Remove unnecessary WARN_ON()
- Remove headers from armada_ap_cp_helper.h
- Few other minor cleanup
Gregory CLEMENT (6):
dt-bindings: ap806: add the cluster clock node in the syscon file
clk: mvebu: add helper file for Armada AP and CP clocks
clk: mvebu: add CPU clock driver for Armada 7K/8K
clk: mvebu: ap806: Fix clock name for the cluster
arm64: marvell: enable the Armada 7K/8K CPU clk driver
arm64: dts: marvell: Add cpu clock node on Armada 7K/8K
.../arm/marvell/ap806-system-controller.txt | 25 ++
arch/arm64/Kconfig.platforms | 1 +
.../boot/dts/marvell/armada-ap806-quad.dtsi | 4 +
arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 6 +
drivers/clk/mvebu/Kconfig | 8 +
drivers/clk/mvebu/Makefile | 2 +
drivers/clk/mvebu/ap-cpu-clk.c | 259 ++++++++++++++++++
drivers/clk/mvebu/ap806-system-controller.c | 24 +-
drivers/clk/mvebu/armada_ap_cp_helper.c | 30 ++
drivers/clk/mvebu/armada_ap_cp_helper.h | 11 +
drivers/clk/mvebu/cp110-system-controller.c | 32 +--
11 files changed, 360 insertions(+), 42 deletions(-)
create mode 100644 drivers/clk/mvebu/ap-cpu-clk.c
create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.c
create mode 100644 drivers/clk/mvebu/armada_ap_cp_helper.h
--
2.20.1
Powered by blists - more mailing lists