| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 25 Mar 2019 21:55:57 +0800
From: Axel Lin <axel.lin@...ics.com>
To: Mark Brown <broonie@...nel.org>
Cc: Bartosz Golaszewski <bgolaszewski@...libre.com>,
Liam Girdwood <lgirdwood@...il.com>,
linux-kernel@...r.kernel.org, Axel Lin <axel.lin@...ics.com>
Subject: [PATCH] regulator: max77650: Convert MAX77651 SBB1 to pickable linear range
The pickable linear range is suitable for The MAX77651 SBB1.
According to MAX77651 TV_SBB1 Code Table:
Use BIT[1:0] as range selectors.
Use BIT[5:2] as selectors for each linear range.
The MAX77651 SBB1 supports up to selector 57, selector 58 ~ 63 are RSVD,
thus set n_voltage to 58.
Signed-off-by: Axel Lin <axel.lin@...ics.com>
---
Hi Bartosz,
I don't have this h/w, please help to review and test this patch.
Thanks,
Axel
drivers/regulator/max77650-regulator.c | 134 +++++++++----------------
1 file changed, 45 insertions(+), 89 deletions(-)
diff --git a/drivers/regulator/max77650-regulator.c b/drivers/regulator/max77650-regulator.c
index 5c4f86c98510..24b4a0a3c3bb 100644
--- a/drivers/regulator/max77650-regulator.c
+++ b/drivers/regulator/max77650-regulator.c
@@ -20,6 +20,8 @@
#define MAX77650_REGULATOR_V_LDO_MASK GENMASK(6, 0)
#define MAX77650_REGULATOR_V_SBB_MASK GENMASK(5, 0)
+#define MAX77651_REGULATOR_V_SBB1_MASK GENMASK(5, 2)
+#define MAX77651_REGULATOR_V_SBB1_RANGE_MASK GENMASK(1, 0)
#define MAX77650_REGULATOR_AD_MASK BIT(3)
#define MAX77650_REGULATOR_AD_DISABLED 0x00
@@ -27,6 +29,8 @@
#define MAX77650_REGULATOR_CURR_LIM_MASK GENMASK(7, 6)
+static struct max77650_regulator_desc max77651_SBB1_desc;
+
enum {
MAX77650_REGULATOR_ID_LDO = 0,
MAX77650_REGULATOR_ID_SBB0,
@@ -41,43 +45,20 @@ struct max77650_regulator_desc {
unsigned int regB;
};
-static const unsigned int max77651_sbb1_regulator_volt_table[] = {
- 2400000, 3200000, 4000000, 4800000,
- 2450000, 3250000, 4050000, 4850000,
- 2500000, 3300000, 4100000, 4900000,
- 2550000, 3350000, 4150000, 4950000,
- 2600000, 3400000, 4200000, 5000000,
- 2650000, 3450000, 4250000, 5050000,
- 2700000, 3500000, 4300000, 5100000,
- 2750000, 3550000, 4350000, 5150000,
- 2800000, 3600000, 4400000, 5200000,
- 2850000, 3650000, 4450000, 5250000,
- 2900000, 3700000, 4500000, 0,
- 2950000, 3750000, 4550000, 0,
- 3000000, 3800000, 4600000, 0,
- 3050000, 3850000, 4650000, 0,
- 3100000, 3900000, 4700000, 0,
- 3150000, 3950000, 4750000, 0,
+static const unsigned int max77651_sbb1_volt_range_sel[] = {
+ 0x0, 0x1, 0x2, 0x3
};
-#define MAX77651_REGULATOR_SBB1_SEL_DEC(_val) \
- (((_val & 0x3c) >> 2) | ((_val & 0x03) << 4))
-#define MAX77651_REGULATOR_SBB1_SEL_ENC(_val) \
- (((_val & 0x30) >> 4) | ((_val & 0x0f) << 2))
-
-#define MAX77650_REGULATOR_SBB1_SEL_DECR(_val) \
- do { \
- _val = MAX77651_REGULATOR_SBB1_SEL_DEC(_val); \
- _val--; \
- _val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \
- } while (0)
-
-#define MAX77650_REGULATOR_SBB1_SEL_INCR(_val) \
- do { \
- _val = MAX77651_REGULATOR_SBB1_SEL_DEC(_val); \
- _val++; \
- _val = MAX77651_REGULATOR_SBB1_SEL_ENC(_val); \
- } while (0)
+static const struct regulator_linear_range max77651_sbb1_volt_ranges[] = {
+ /* range index 0 */
+ REGULATOR_LINEAR_RANGE(2400000, 0x00, 0x0f, 50000),
+ /* range index 1 */
+ REGULATOR_LINEAR_RANGE(3200000, 0x00, 0x0f, 50000),
+ /* range index 2 */
+ REGULATOR_LINEAR_RANGE(4000000, 0x00, 0x0f, 50000),
+ /* range index 3 */
+ REGULATOR_LINEAR_RANGE(4800000, 0x00, 0x09, 50000),
+};
static const unsigned int max77650_current_limit_table[] = {
1000000, 866000, 707000, 500000,
@@ -130,6 +111,7 @@ static int max77650_regulator_disable(struct regulator_dev *rdev)
static int max77650_regulator_set_voltage_sel(struct regulator_dev *rdev,
unsigned int sel)
{
+ struct max77650_regulator_desc *rdesc = rdev_get_drvdata(rdev);
int rv = 0, curr, diff;
bool ascending;
@@ -137,15 +119,24 @@ static int max77650_regulator_set_voltage_sel(struct regulator_dev *rdev,
* If the regulator is disabled, we can program the desired
* voltage right away.
*/
- if (!max77650_regulator_is_enabled(rdev))
- return regulator_set_voltage_sel_regmap(rdev, sel);
+ if (!max77650_regulator_is_enabled(rdev)) {
+ if (rdesc == &max77651_SBB1_desc)
+ return regulator_set_voltage_sel_pickable_regmap(rdev,
+ sel);
+ else
+ return regulator_set_voltage_sel_regmap(rdev, sel);
+ }
/*
* Otherwise we need to manually ramp the output voltage up/down
* one step at a time.
*/
- curr = regulator_get_voltage_sel_regmap(rdev);
+ if (rdesc == &max77651_SBB1_desc)
+ curr = regulator_get_voltage_sel_pickable_regmap(rdev);
+ else
+ curr = regulator_get_voltage_sel_regmap(rdev);
+
if (curr < 0)
return curr;
@@ -162,57 +153,18 @@ static int max77650_regulator_set_voltage_sel(struct regulator_dev *rdev,
* the selector equals 0.
*/
for (ascending ? curr++ : curr--;; ascending ? curr++ : curr--) {
- rv = regulator_set_voltage_sel_regmap(rdev, curr);
- if (rv)
- return rv;
-
- if (curr == sel)
- break;
- }
-
- return 0;
-}
-
-/*
- * Special case: non-linear voltage table for max77651 SBB1 - software
- * must ensure the voltage is ramped in 50mV increments.
- */
-static int max77651_regulator_sbb1_set_voltage_sel(struct regulator_dev *rdev,
- unsigned int sel)
-{
- int rv = 0, curr, vcurr, vdest, vdiff;
-
- /*
- * If the regulator is disabled, we can program the desired
- * voltage right away.
- */
- if (!max77650_regulator_is_enabled(rdev))
- return regulator_set_voltage_sel_regmap(rdev, sel);
-
- curr = regulator_get_voltage_sel_regmap(rdev);
- if (curr < 0)
- return curr;
-
- if (curr == sel)
- return 0; /* Already there. */
-
- vcurr = max77651_sbb1_regulator_volt_table[curr];
- vdest = max77651_sbb1_regulator_volt_table[sel];
- vdiff = vcurr - vdest;
-
- for (;;) {
- if (vdiff > 0)
- MAX77650_REGULATOR_SBB1_SEL_DECR(curr);
+ if (rdesc == &max77651_SBB1_desc)
+ rv = regulator_set_voltage_sel_pickable_regmap(rdev,
+ curr);
else
- MAX77650_REGULATOR_SBB1_SEL_INCR(curr);
+ rv = regulator_set_voltage_sel_regmap(rdev, curr);
- rv = regulator_set_voltage_sel_regmap(rdev, curr);
if (rv)
return rv;
if (curr == sel)
break;
- };
+ }
return 0;
}
@@ -241,14 +193,14 @@ static const struct regulator_ops max77650_regulator_SBB_ops = {
.set_active_discharge = regulator_set_active_discharge_regmap,
};
-/* Special case for max77651 SBB1 - non-linear voltage mapping. */
+/* Special case for max77651 SBB1 - pickable linear-range voltage mapping. */
static const struct regulator_ops max77651_SBB1_regulator_ops = {
.is_enabled = max77650_regulator_is_enabled,
.enable = max77650_regulator_enable,
.disable = max77650_regulator_disable,
- .list_voltage = regulator_list_voltage_table,
- .get_voltage_sel = regulator_get_voltage_sel_regmap,
- .set_voltage_sel = max77651_regulator_sbb1_set_voltage_sel,
+ .list_voltage = regulator_list_voltage_pickable_linear_range,
+ .get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
+ .set_voltage_sel = max77650_regulator_set_voltage_sel,
.get_current_limit = regulator_get_current_limit_regmap,
.set_current_limit = regulator_set_current_limit_regmap,
.set_active_discharge = regulator_set_active_discharge_regmap,
@@ -345,9 +297,13 @@ static struct max77650_regulator_desc max77651_SBB1_desc = {
.supply_name = "in-sbb1",
.id = MAX77650_REGULATOR_ID_SBB1,
.ops = &max77651_SBB1_regulator_ops,
- .volt_table = max77651_sbb1_regulator_volt_table,
- .n_voltages = ARRAY_SIZE(max77651_sbb1_regulator_volt_table),
- .vsel_mask = MAX77650_REGULATOR_V_SBB_MASK,
+ .linear_range_selectors = max77651_sbb1_volt_range_sel,
+ .linear_ranges = max77651_sbb1_volt_ranges,
+ .n_linear_ranges = ARRAY_SIZE(max77651_sbb1_volt_ranges),
+ .n_voltages = 58,
+ .vsel_range_mask = MAX77651_REGULATOR_V_SBB1_RANGE_MASK,
+ .vsel_range_reg = MAX77650_REG_CNFG_SBB1_A,
+ .vsel_mask = MAX77651_REGULATOR_V_SBB1_MASK,
.vsel_reg = MAX77650_REG_CNFG_SBB1_A,
.active_discharge_off = MAX77650_REGULATOR_AD_DISABLED,
.active_discharge_on = MAX77650_REGULATOR_AD_ENABLED,
--
2.17.1
Powered by blists - more mailing lists