| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190326173208.30614-7-brgl@bgdev.pl>
Date: Tue, 26 Mar 2019 18:32:03 +0100
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Linus Walleij <linus.walleij@...aro.org>,
Dmitry Torokhov <dmitry.torokhov@...il.com>,
Jacek Anaszewski <jacek.anaszewski@...il.com>,
Pavel Machek <pavel@....cz>, Lee Jones <lee.jones@...aro.org>,
Sebastian Reichel <sre@...nel.org>,
Liam Girdwood <lgirdwood@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>
Cc: linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-input@...r.kernel.org,
linux-leds@...r.kernel.org, linux-pm@...r.kernel.org,
Bartosz Golaszewski <bgolaszewski@...libre.com>
Subject: [PATCH v7 06/11] mfd: max77650: new core mfd driver
From: Bartosz Golaszewski <bgolaszewski@...libre.com>
Add the core mfd driver for max77650 PMIC. We define five sub-devices
for which the drivers will be added in subsequent patches.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@...libre.com>
---
drivers/mfd/Kconfig | 14 +++
drivers/mfd/Makefile | 1 +
drivers/mfd/max77650.c | 234 +++++++++++++++++++++++++++++++++++
include/linux/mfd/max77650.h | 59 +++++++++
4 files changed, 308 insertions(+)
create mode 100644 drivers/mfd/max77650.c
create mode 100644 include/linux/mfd/max77650.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 0ce2d8dfc5f1..ade04e124aa0 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -733,6 +733,20 @@ config MFD_MAX77620
provides common support for accessing the device; additional drivers
must be enabled in order to use the functionality of the device.
+config MFD_MAX77650
+ tristate "Maxim MAX77650/77651 PMIC Support"
+ depends on I2C
+ depends on OF || COMPILE_TEST
+ select MFD_CORE
+ select REGMAP_I2C
+ help
+ Say Y here to add support for Maxim Semiconductor MAX77650 and
+ MAX77651 Power Management ICs. This is the core multifunction
+ driver for interacting with the device. The module name is
+ 'max77650'. Additional drivers can be enabled in order to use
+ the following functionalities of the device: GPIO, regulator,
+ charger, LED, onkey.
+
config MFD_MAX77686
tristate "Maxim Semiconductor MAX77686/802 PMIC Support"
depends on I2C
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index b4569ed7f3f3..5727d099c16f 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -155,6 +155,7 @@ obj-$(CONFIG_MFD_DA9150) += da9150-core.o
obj-$(CONFIG_MFD_MAX14577) += max14577.o
obj-$(CONFIG_MFD_MAX77620) += max77620.o
+obj-$(CONFIG_MFD_MAX77650) += max77650.o
obj-$(CONFIG_MFD_MAX77686) += max77686.o
obj-$(CONFIG_MFD_MAX77693) += max77693.o
obj-$(CONFIG_MFD_MAX77843) += max77843.o
diff --git a/drivers/mfd/max77650.c b/drivers/mfd/max77650.c
new file mode 100644
index 000000000000..7a6c0a5cf602
--- /dev/null
+++ b/drivers/mfd/max77650.c
@@ -0,0 +1,234 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (C) 2018 BayLibre SAS
+// Author: Bartosz Golaszewski <bgolaszewski@...libre.com>
+//
+// Core MFD driver for MAXIM 77650/77651 charger/power-supply.
+// Programming manual: https://pdfserv.maximintegrated.com/en/an/AN6428.pdf
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/max77650.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#define MAX77650_INT_GPI_F_MSK BIT(0)
+#define MAX77650_INT_GPI_R_MSK BIT(1)
+#define MAX77650_INT_GPI_MSK \
+ (MAX77650_INT_GPI_F_MSK | MAX77650_INT_GPI_R_MSK)
+#define MAX77650_INT_nEN_F_MSK BIT(2)
+#define MAX77650_INT_nEN_R_MSK BIT(3)
+#define MAX77650_INT_TJAL1_R_MSK BIT(4)
+#define MAX77650_INT_TJAL2_R_MSK BIT(5)
+#define MAX77650_INT_DOD_R_MSK BIT(6)
+
+#define MAX77650_INT_THM_MSK BIT(0)
+#define MAX77650_INT_CHG_MSK BIT(1)
+#define MAX77650_INT_CHGIN_MSK BIT(2)
+#define MAX77650_INT_TJ_REG_MSK BIT(3)
+#define MAX77650_INT_CHGIN_CTRL_MSK BIT(4)
+#define MAX77650_INT_SYS_CTRL_MSK BIT(5)
+#define MAX77650_INT_SYS_CNFG_MSK BIT(6)
+
+#define MAX77650_INT_GLBL_OFFSET 0
+#define MAX77650_INT_CHG_OFFSET 1
+
+#define MAX77650_SBIA_LPM_MASK BIT(5)
+#define MAX77650_SBIA_LPM_DISABLED 0x00
+
+enum {
+ MAX77650_INT_GPI,
+ MAX77650_INT_nEN_F,
+ MAX77650_INT_nEN_R,
+ MAX77650_INT_TJAL1_R,
+ MAX77650_INT_TJAL2_R,
+ MAX77650_INT_DOD_R,
+ MAX77650_INT_THM,
+ MAX77650_INT_CHG,
+ MAX77650_INT_CHGIN,
+ MAX77650_INT_TJ_REG,
+ MAX77650_INT_CHGIN_CTRL,
+ MAX77650_INT_SYS_CTRL,
+ MAX77650_INT_SYS_CNFG,
+};
+
+static const struct resource max77650_charger_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHG, "CHG"),
+ DEFINE_RES_IRQ_NAMED(MAX77650_INT_CHGIN, "CHGIN"),
+};
+
+static const struct resource max77650_gpio_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MAX77650_INT_GPI, "GPI"),
+};
+
+static const struct resource max77650_onkey_resources[] = {
+ DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_F, "nEN_F"),
+ DEFINE_RES_IRQ_NAMED(MAX77650_INT_nEN_R, "nEN_R"),
+};
+
+static const struct mfd_cell max77650_cells[] = {
+ {
+ .name = "max77650-regulator",
+ .of_compatible = "maxim,max77650-regulator",
+ },
+ {
+ .name = "max77650-charger",
+ .of_compatible = "maxim,max77650-charger",
+ .resources = max77650_charger_resources,
+ .num_resources = ARRAY_SIZE(max77650_charger_resources),
+ },
+ {
+ .name = "max77650-gpio",
+ .of_compatible = "maxim,max77650-gpio",
+ .resources = max77650_gpio_resources,
+ .num_resources = ARRAY_SIZE(max77650_gpio_resources),
+ },
+ {
+ .name = "max77650-led",
+ .of_compatible = "maxim,max77650-led",
+ },
+ {
+ .name = "max77650-onkey",
+ .of_compatible = "maxim,max77650-onkey",
+ .resources = max77650_onkey_resources,
+ .num_resources = ARRAY_SIZE(max77650_onkey_resources),
+ },
+};
+
+static const struct regmap_irq max77650_irqs[] = {
+ [MAX77650_INT_GPI] = {
+ .reg_offset = MAX77650_INT_GLBL_OFFSET,
+ .mask = MAX77650_INT_GPI_MSK,
+ .type = {
+ .type_falling_val = MAX77650_INT_GPI_F_MSK,
+ .type_rising_val = MAX77650_INT_GPI_R_MSK,
+ .types_supported = IRQ_TYPE_EDGE_BOTH,
+ },
+ },
+ REGMAP_IRQ_REG(MAX77650_INT_nEN_F,
+ MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_F_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_nEN_R,
+ MAX77650_INT_GLBL_OFFSET, MAX77650_INT_nEN_R_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_TJAL1_R,
+ MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL1_R_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_TJAL2_R,
+ MAX77650_INT_GLBL_OFFSET, MAX77650_INT_TJAL2_R_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_DOD_R,
+ MAX77650_INT_GLBL_OFFSET, MAX77650_INT_DOD_R_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_THM,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_THM_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_CHG,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHG_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_CHGIN,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_TJ_REG,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_TJ_REG_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_CHGIN_CTRL,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_CHGIN_CTRL_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_SYS_CTRL,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CTRL_MSK),
+ REGMAP_IRQ_REG(MAX77650_INT_SYS_CNFG,
+ MAX77650_INT_CHG_OFFSET, MAX77650_INT_SYS_CNFG_MSK),
+};
+
+static const struct regmap_irq_chip max77650_irq_chip = {
+ .name = "max77650-irq",
+ .irqs = max77650_irqs,
+ .num_irqs = ARRAY_SIZE(max77650_irqs),
+ .num_regs = 2,
+ .status_base = MAX77650_REG_INT_GLBL,
+ .mask_base = MAX77650_REG_INTM_GLBL,
+ .type_in_mask = true,
+ .type_invert = true,
+ .init_ack_masked = true,
+ .clear_on_unmask = true,
+};
+
+static const struct regmap_config max77650_regmap_config = {
+ .name = "max77650",
+ .reg_bits = 8,
+ .val_bits = 8,
+};
+
+static int max77650_i2c_probe(struct i2c_client *i2c)
+{
+ struct regmap_irq_chip_data *irq_data;
+ struct device *dev = &i2c->dev;
+ struct irq_domain *domain;
+ struct regmap *map;
+ unsigned int val;
+ int rv;
+
+ map = devm_regmap_init_i2c(i2c, &max77650_regmap_config);
+ if (IS_ERR(map)) {
+ dev_err(dev, "unable to initialize i2c regmap\n");
+ return PTR_ERR(map);
+ }
+
+ rv = regmap_read(map, MAX77650_REG_CID, &val);
+ if (rv) {
+ dev_err(dev, "unable to read the CID from device\n");
+ return rv;
+ }
+
+ switch (MAX77650_CID_BITS(val)) {
+ case MAX77650_CID_77650A:
+ case MAX77650_CID_77650C:
+ case MAX77650_CID_77651A:
+ case MAX77650_CID_77651B:
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ /*
+ * This IC has a low-power mode which reduces the quiescent current
+ * consumption to ~5.6uA but is only suitable for systems consuming
+ * less than ~2mA. Since this is not likely the case even on
+ * linux-based wearables - keep the chip in normal power mode.
+ */
+ rv = regmap_update_bits(map,
+ MAX77650_REG_CNFG_GLBL,
+ MAX77650_SBIA_LPM_MASK,
+ MAX77650_SBIA_LPM_DISABLED);
+ if (rv) {
+ dev_err(dev, "unable to change the power mode\n");
+ return rv;
+ }
+
+ rv = devm_regmap_add_irq_chip(dev, map, i2c->irq,
+ IRQF_ONESHOT | IRQF_SHARED, 0,
+ &max77650_irq_chip, &irq_data);
+ if (rv) {
+ dev_err(dev, "unable to add the regmap irq chip\n");
+ return rv;
+ }
+
+ domain = regmap_irq_get_domain(irq_data);
+
+ return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+ max77650_cells, ARRAY_SIZE(max77650_cells),
+ NULL, 0, domain);
+}
+
+static const struct of_device_id max77650_of_match[] = {
+ { .compatible = "maxim,max77650" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, max77650_of_match);
+
+static struct i2c_driver max77650_i2c_driver = {
+ .driver = {
+ .name = "max77650",
+ .of_match_table = of_match_ptr(max77650_of_match),
+ },
+ .probe_new = max77650_i2c_probe,
+};
+module_i2c_driver(max77650_i2c_driver);
+
+MODULE_DESCRIPTION("MAXIM 77650/77651 multi-function core driver");
+MODULE_AUTHOR("Bartosz Golaszewski <bgolaszewski@...libre.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/max77650.h b/include/linux/mfd/max77650.h
new file mode 100644
index 000000000000..c809e211a8cd
--- /dev/null
+++ b/include/linux/mfd/max77650.h
@@ -0,0 +1,59 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018 BayLibre SAS
+ * Author: Bartosz Golaszewski <bgolaszewski@...libre.com>
+ *
+ * Common definitions for MAXIM 77650/77651 charger/power-supply.
+ */
+
+#ifndef MAX77650_H
+#define MAX77650_H
+
+#include <linux/bits.h>
+
+#define MAX77650_REG_INT_GLBL 0x00
+#define MAX77650_REG_INT_CHG 0x01
+#define MAX77650_REG_STAT_CHG_A 0x02
+#define MAX77650_REG_STAT_CHG_B 0x03
+#define MAX77650_REG_ERCFLAG 0x04
+#define MAX77650_REG_STAT_GLBL 0x05
+#define MAX77650_REG_INTM_GLBL 0x06
+#define MAX77650_REG_INTM_CHG 0x07
+#define MAX77650_REG_CNFG_GLBL 0x10
+#define MAX77650_REG_CID 0x11
+#define MAX77650_REG_CNFG_GPIO 0x12
+#define MAX77650_REG_CNFG_CHG_A 0x18
+#define MAX77650_REG_CNFG_CHG_B 0x19
+#define MAX77650_REG_CNFG_CHG_C 0x1a
+#define MAX77650_REG_CNFG_CHG_D 0x1b
+#define MAX77650_REG_CNFG_CHG_E 0x1c
+#define MAX77650_REG_CNFG_CHG_F 0x1d
+#define MAX77650_REG_CNFG_CHG_G 0x1e
+#define MAX77650_REG_CNFG_CHG_H 0x1f
+#define MAX77650_REG_CNFG_CHG_I 0x20
+#define MAX77650_REG_CNFG_SBB_TOP 0x28
+#define MAX77650_REG_CNFG_SBB0_A 0x29
+#define MAX77650_REG_CNFG_SBB0_B 0x2a
+#define MAX77650_REG_CNFG_SBB1_A 0x2b
+#define MAX77650_REG_CNFG_SBB1_B 0x2c
+#define MAX77650_REG_CNFG_SBB2_A 0x2d
+#define MAX77650_REG_CNFG_SBB2_B 0x2e
+#define MAX77650_REG_CNFG_LDO_A 0x38
+#define MAX77650_REG_CNFG_LDO_B 0x39
+#define MAX77650_REG_CNFG_LED0_A 0x40
+#define MAX77650_REG_CNFG_LED1_A 0x41
+#define MAX77650_REG_CNFG_LED2_A 0x42
+#define MAX77650_REG_CNFG_LED0_B 0x43
+#define MAX77650_REG_CNFG_LED1_B 0x44
+#define MAX77650_REG_CNFG_LED2_B 0x45
+#define MAX77650_REG_CNFG_LED_TOP 0x46
+
+#define MAX77650_CID_MASK GENMASK(3, 0)
+#define MAX77650_CID_BITS(_reg) (_reg & MAX77650_CID_MASK)
+
+#define MAX77650_CID_77650A 0x03
+#define MAX77650_CID_77650C 0x0a
+#define MAX77650_CID_77651A 0x06
+#define MAX77650_CID_77651B 0x08
+
+#endif /* MAX77650_H */
--
2.20.1
Powered by blists - more mailing lists