| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAK+PMK7u-4sVzVJV0hhToDHBwapLaP4FJz43HrxcjD4ZeQfa2g@mail.gmail.com>
Date: Tue, 26 Mar 2019 15:15:23 -0600
From: Jett Rink <jettrink@...omium.org>
To: Srinivas Pandruvada <srinivas.pandruvada@...ux.intel.com>
Cc: Rushikesh S Kadam <rushikesh.s.kadam@...el.com>,
benjamin.tissoires@...hat.com, jikos@...nel.org,
ncrews@...omium.org, Gwendal Grignou <gwendal@...gle.com>,
linux-kernel <linux-kernel@...r.kernel.org>,
linux-input@...r.kernel.org
Subject: Re: [PATCH] HID: intel-ish-hid: ISH firmware loader client driver
Tested-by: Jett Rink <jettrink@...omium.org>
On Sun, Mar 24, 2019 at 9:36 AM Srinivas Pandruvada
<srinivas.pandruvada@...ux.intel.com> wrote:
>
> On Sat, 2019-03-23 at 16:46 +0530, Rushikesh S Kadam wrote:
> > This driver adds support for loading Intel Integrated
> > Sensor Hub (ISH) firmware from host file system to ISH
> > SRAM and start execution.
> >
> > At power-on, the ISH subsystem shall boot to an interim
> > Shim loader-firmware, which shall expose an ISHTP loader
> > device.
> >
> > The driver implements an ISHTP client that communicates
> > with the Shim ISHTP loader device over the intel-ish-hid
> > stack, to download the main ISH firmware.
> >
> > Signed-off-by: Rushikesh S Kadam <rushikesh.s.kadam@...el.com>
> Anybody in CC list here can add Reviewed-By/Tested-by tag?
>
> One comment below for copyright year.
>
> Thanks,
> Srinivas
> > ---
> > The patches are baselined to hid git tree, branch for-5.2/ish
> >
> https://git.kernel.org/pub/scm/linux/kernel/git/hid/hid.git/log/?h=for-5.2/ish
> >
> > drivers/hid/Makefile | 1 +
> > drivers/hid/intel-ish-hid/Kconfig | 15 +
> > drivers/hid/intel-ish-hid/Makefile | 3 +
> > drivers/hid/intel-ish-hid/ishtp-fw-loader.c | 1103
> > +++++++++++++++++++++++++++
> > 4 files changed, 1122 insertions(+)
> > create mode 100644 drivers/hid/intel-ish-hid/ishtp-fw-loader.c
> >
> > diff --git a/drivers/hid/Makefile b/drivers/hid/Makefile
> > index 170163b..d8d393e 100644
> > --- a/drivers/hid/Makefile
> > +++ b/drivers/hid/Makefile
> > @@ -134,3 +134,4 @@ obj-$(CONFIG_USB_KBD) += usbhid/
> > obj-$(CONFIG_I2C_HID) += i2c-hid/
> >
> > obj-$(CONFIG_INTEL_ISH_HID) += intel-ish-hid/
> > +obj-$(INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ish-hid/
> > diff --git a/drivers/hid/intel-ish-hid/Kconfig b/drivers/hid/intel-
> > ish-hid/Kconfig
> > index 519e4c8..786adbc 100644
> > --- a/drivers/hid/intel-ish-hid/Kconfig
> > +++ b/drivers/hid/intel-ish-hid/Kconfig
> > @@ -14,4 +14,19 @@ config INTEL_ISH_HID
> > Broxton and Kaby Lake.
> >
> > Say Y here if you want to support Intel ISH. If unsure, say
> > N.
> > +
> > +config INTEL_ISH_FIRMWARE_DOWNLOADER
> > + tristate "Host Firmware Load feature for Intel ISH"
> > + depends on INTEL_ISH_HID
> > + depends on X86
> > + help
> > + The Integrated Sensor Hub (ISH) enables the kernel to offload
> > + sensor polling and algorithm processing to a dedicated low
> > power
> > + processor in the chipset.
> > +
> > + The Host Firmware Load feature adds support to load the ISH
> > + firmware from host file system at boot.
> > +
> > + Say M here if you want to support Host Firmware Loading
> > feature
> > + for Intel ISH. If unsure, say N.
> > endmenu
> > diff --git a/drivers/hid/intel-ish-hid/Makefile b/drivers/hid/intel-
> > ish-hid/Makefile
> > index 825b70a..2de97e4 100644
> > --- a/drivers/hid/intel-ish-hid/Makefile
> > +++ b/drivers/hid/intel-ish-hid/Makefile
> > @@ -20,4 +20,7 @@ obj-$(CONFIG_INTEL_ISH_HID) += intel-ishtp-hid.o
> > intel-ishtp-hid-objs := ishtp-hid.o
> > intel-ishtp-hid-objs += ishtp-hid-client.o
> >
> > +obj-$(CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER) += intel-ishtp-loader.o
> > +intel-ishtp-loader-objs += ishtp-fw-loader.o
> > +
> > ccflags-y += -Idrivers/hid/intel-ish-hid/ishtp
> > diff --git a/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
> > b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
> > new file mode 100644
> > index 0000000..85d71d3
> > --- /dev/null
> > +++ b/drivers/hid/intel-ish-hid/ishtp-fw-loader.c
> > @@ -0,0 +1,1103 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * ISH-TP client driver for ISH firmware loading
> > + *
> > + * Copyright (c) 2018, Intel Corporation.
> Year 2019.
>
> > + */
> > +
> > +#include <linux/firmware.h>
> > +#include <linux/module.h>
> > +#include <linux/pci.h>
> > +#include <linux/intel-ish-client-if.h>
> > +#include <linux/property.h>
> > +#include <asm/cacheflush.h>
> > +
> > +/* ISH TX/RX ring buffer pool size */
> > +#define LOADER_CL_RX_RING_SIZE 1
> > +#define LOADER_CL_TX_RING_SIZE 1
> > +
> > +/*
> > + * ISH Shim firmware loader reserves 4 Kb buffer in SRAM. The buffer
> > is
> > + * used to temporarily hold the data transferred from host to Shim
> > firmware
> > + * loader. Reason for the odd size of 3968 bytes? Each IPC transfer
> > is 128
> > + * bytes (= 4 bytes header + 124 bytes payload). So the 4 Kb buffer
> > can
> > + * hold maximum of 32 IPC transfers, which means we can have a max
> > payload
> > + * of 3968 bytes (= 32 x 124 payload).
> > + */
> > +#define LOADER_SHIM_IPC_BUF_SIZE 3968
> > +
> > +/**
> > + * enum ish_loader_commands - ISH loader host commands.
> > + * LOADER_CMD_XFER_QUERY Query the Shim firmware loader for
> > capabilities
> > + * LOADER_CMD_XFER_FRAGMENT Transfer one firmware image framgment
> > at a
> > + * time. The command may be executed
> > multiple
> > + * times until the entire firmware image
> > is
> > + * downloaded to SRAM.
> > + * LOADER_CMD_START Start executing the main firmware.
> > + */
> > +enum ish_loader_commands {
> > + LOADER_CMD_XFER_QUERY = 0,
> > + LOADER_CMD_XFER_FRAGMENT,
> > + LOADER_CMD_START,
> > +};
> > +
> > +/* Command bit mask */
> > +#define CMD_MASK GENMASK(6, 0)
> > +#define IS_RESPONSE BIT(7)
> > +
> > +/*
> > + * ISH firmware max delay for one transmit failure is 1 Hz,
> > + * and firmware will retry 2 times, so 3 Hz is used for timeout.
> > + */
> > +#define ISHTP_SEND_TIMEOUT (3 * HZ)
> > +
> > +/*
> > + * Loader transfer modes:
> > + *
> > + * LOADER_XFER_MODE_ISHTP mode uses the existing ISH-TP mechanims to
> > + * transfer data. This may use IPC or DMA if supported in firmware.
> > + * The buffer size is limited to 4 Kb by the IPC/ISH-TP protocol for
> > + * both IPC & DMA (legacy).
> > + *
> > + * LOADER_XFER_MODE_DIRECT_DMA - firmware loading is a bit different
> > + * from the sensor data streaming. Here we download a large (300+
> > Kb)
> > + * image directly to ISH SRAM memory. There is limited benefit of
> > + * DMA'ing 300 Kb image in 4 Kb chucks limit. Hence, we introduce
> > + * this "direct dma" mode, where we do not use ISH-TP for DMA, but
> > + * instead manage the DMA directly in kernel driver and Shim
> > firmware
> > + * loader (allocate buf, break in chucks and transfer). This allows
> > + * to overcome 4 Kb limit, and optimize the data flow path in
> > firmware.
> > + */
> > +#define LOADER_XFER_MODE_DIRECT_DMA BIT(0)
> > +#define LOADER_XFER_MODE_ISHTP BIT(1)
> > +
> > +/* ISH Transport Loader client unique GUID */
> > +static const guid_t loader_ishtp_guid =
> > + GUID_INIT(0xc804d06a, 0x55bd, 0x4ea7,
> > + 0xad, 0xed, 0x1e, 0x31, 0x22, 0x8c, 0x76, 0xdc);
> > +
> > +#define FILENAME_SIZE 256
> > +
> > +/*
> > + * The firmware loading latency will be minimum if we can DMA the
> > + * entire ISH firmware image in one go. This requires that we
> > allocate
> > + * a large DMA buffer in kernel, which could be problematic on some
> > + * platforms. So here we limit the DMA buf size via a module_param.
> > + * We default to 4 pages, but a customer can set it to higher limit
> > if
> > + * deemed appropriate for his platform.
> > + */
> > +static int dma_buf_size_limit = 4 * PAGE_SIZE;
> > +
> > +/**
> > + * struct loader_msg_hdr - Header for ISH Loader commands.
> > + * @command: LOADER_CMD* commands. Bit 7 is the response.
> > + * @status: Command response status. Non 0, is error
> > condition.
> > + *
> > + * This structure is used as header for every command/data
> > sent/received
> > + * between Host driver and ISH Shim firmware loader.
> > + */
> > +struct loader_msg_hdr {
> > + u8 command;
> > + u8 reserved[2];
> > + u8 status;
> > +} __packed;
> > +
> > +struct loader_xfer_query {
> > + struct loader_msg_hdr hdr;
> > + u32 image_size;
> > +} __packed;
> > +
> > +struct ish_fw_version {
> > + u16 major;
> > + u16 minor;
> > + u16 hotfix;
> > + u16 build;
> > +} __packed;
> > +
> > +union loader_version {
> > + u32 value;
> > + struct {
> > + u8 major;
> > + u8 minor;
> > + u8 hotfix;
> > + u8 build;
> > + };
> > +} __packed;
> > +
> > +struct loader_capability {
> > + u32 max_fw_image_size;
> > + u32 xfer_mode;
> > + u32 max_dma_buf_size; /* only for dma mode, multiples of
> > cacheline */
> > +} __packed;
> > +
> > +struct shim_fw_info {
> > + struct ish_fw_version ish_fw_version;
> > + u32 protocol_version;
> > + union loader_version ldr_version;
> > + struct loader_capability ldr_capability;
> > +} __packed;
> > +
> > +struct loader_xfer_query_response {
> > + struct loader_msg_hdr hdr;
> > + struct shim_fw_info fw_info;
> > +} __packed;
> > +
> > +struct loader_xfer_fragment {
> > + struct loader_msg_hdr hdr;
> > + u32 xfer_mode;
> > + u32 offset;
> > + u32 size;
> > + u32 is_last;
> > +} __packed;
> > +
> > +struct loader_xfer_ipc_fragment {
> > + struct loader_xfer_fragment fragment;
> > + u8 data[] ____cacheline_aligned; /* variable length payload
> > here */
> > +} __packed;
> > +
> > +struct loader_xfer_dma_fragment {
> > + struct loader_xfer_fragment fragment;
> > + u64 ddr_phys_addr;
> > +} __packed;
> > +
> > +struct loader_start {
> > + struct loader_msg_hdr hdr;
> > +} __packed;
> > +
> > +/**
> > + * struct ishtp_cl_data - Encapsulate per ISH-TP Client Data
> > + * @flag_response Set true on receiving a firmware response to
> > host
> > + * loader command
> > + * @cmd_resp_wait: Wait queue for Host firmware loading, where the
> > + * client sends message to ISH firmware and wait
> > for
> > + * response
> > + * @work_ishtp_reset: Work queue for reset handling
> > + * @work_fw_load: Work queue for host firmware loading
> > + * @flag_retry Flag for indicating host firmware
> > loading should be
> > + * retried
> > + * @bad_recv_cnt: Running count of packets received with error
> > + *
> > + * This structure is used to store data per client
> > + */
> > +struct ishtp_cl_data {
> > + struct ishtp_cl *loader_ishtp_cl;
> > + struct ishtp_cl_device *cl_device;
> > +
> > + /* Completion flags */
> > + bool flag_response;
> > +
> > + /* Copy buffer received in firmware "response" here */
> > + void *response_data;
> > + size_t response_size;
> > +
> > + /* Wait queue for ISH firmware message event */
> > + wait_queue_head_t cmd_resp_wait;
> > +
> > + struct work_struct work_ishtp_reset;
> > + struct work_struct work_fw_load;
> > +
> > + /*
> > + * In certain failure scenrios, it makes sense to reset the
> > + * the ISH subsystem and retry Host firmware loading
> > + * (e.g. bad message packet, ENOMEM, etc.)
> > + * On the other hand, failures due to protocol mismatch, etc
> > + * are not recoverable. We do not retry.
> > + *
> > + * If set, the flag indictes that we should re-try the
> > particular
> > + * failure.
> > + */
> > + bool flag_retry;
> > +
> > + /* Statistics */
> > + unsigned int bad_recv_cnt;
> > +};
> > +
> > +#define IPC_FRAGMENT_DATA_PREAMBLE \
> > + offsetof(struct loader_xfer_ipc_fragment, data)
> > +
> > +#define cl_data_to_dev(client_data) ishtp_device((client_data)-
> > >cl_device)
> > +
> > +/**
> > + * get_firmware_variant() - Gets the filename of firmware image to
> > be
> > + * loaded based on platform variant.
> > + * @client_data Client data instance.
> > + * @filename Returns firmware filename.
> > + *
> > + * Queries the firmware-name device property string.
> > + *
> > + * Return: 0 for success, negative error code for failure.
> > + */
> > +static int get_firmware_variant(struct ishtp_cl_data *client_data,
> > + char *filename)
> > +{
> > + int rv;
> > + const char *val;
> > + struct device *devc = ishtp_get_pci_device(client_data-
> > >cl_device);
> > +
> > + rv = device_property_read_string(devc, "firmware-name", &val);
> > + if (rv < 0) {
> > + dev_err(devc,
> > + "Error: ISH firmware-name device property
> > required\n");
> > + return rv;
> > + }
> > + return snprintf(filename, FILENAME_SIZE, "intel/%s", val);
> > +}
> > +
> > +/**
> > + * report_bad_packets() Report bad packets
> > + * @loader_ishtp_cl: Client instance to get stats
> > + * @recv_buf: Raw received host interface message
> > + *
> > + * Dumps error in case bad packet is received
> > + */
> > +static void report_bad_packet(struct ishtp_cl *loader_ishtp_cl,
> > + void *recv_buf)
> > +{
> > + struct loader_msg_hdr *hdr = recv_buf;
> > + struct ishtp_cl_data *client_data =
> > + ishtp_get_client_data(loader_ishtp_cl);
> > +
> > + client_data->bad_recv_cnt++;
> > + dev_err(cl_data_to_dev(client_data),
> > + "BAD packet: command=%02lx is_response=%u status=%02x
> > total_bad=%u\n",
> > + hdr->command & CMD_MASK,
> > + hdr->command & IS_RESPONSE ? 1 : 0,
> > + hdr->status,
> > + client_data->bad_recv_cnt);
> > +}
> > +
> > +/**
> > + * loader_ish_hw_reset() - Reset ISH HW in bad state
> > + * @loader_ishtp_cl Client instance to reset
> > + *
> > + * This function resets ISH hardware, which shall reload
> > + * the Shim firmware loader, initiate ISH-TP interface reset,
> > + * re-attach kernel loader driver, and repeat Host
> > + * firmware load.
> > + */
> > +static inline void loader_ish_hw_reset(struct ishtp_cl
> > *loader_ishtp_cl)
> > +{
> > + struct ishtp_cl_data *client_data =
> > + ishtp_get_client_data(loader_ishtp_cl);
> > +
> > + dev_warn(cl_data_to_dev(client_data), "Reset the ISH
> > subsystem\n");
> > + ish_hw_reset(ishtp_get_ishtp_device(loader_ishtp_cl));
> > +}
> > +
> > +/**
> > + * loader_cl_send() Send message from host to firmware
> > + * @client_data: Client data instance
> > + * @msg Message buffer to send
> > + * @msg_size Size of message
> > + *
> > + * Return: Received buffer size on success, negative error code on
> > failure.
> > + */
> > +static int loader_cl_send(struct ishtp_cl_data *client_data,
> > + u8 *msg, size_t msg_size)
> > +{
> > + int rv;
> > + size_t data_len;
> > + struct loader_msg_hdr *in_hdr;
> > + struct loader_msg_hdr *out_hdr = (struct loader_msg_hdr *)msg;
> > + struct ishtp_cl *loader_ishtp_cl = client_data-
> > >loader_ishtp_cl;
> > +
> > + dev_dbg(cl_data_to_dev(client_data),
> > + "%s: command=%02lx is_response=%u status=%02x\n",
> > + __func__,
> > + out_hdr->command & CMD_MASK,
> > + out_hdr->command & IS_RESPONSE ? 1 : 0,
> > + out_hdr->status);
> > +
> > + client_data->flag_response = false;
> > + rv = ishtp_cl_send(loader_ishtp_cl, msg, msg_size);
> > + if (rv < 0) {
> > + dev_err(cl_data_to_dev(client_data),
> > + "ishtp_cl_send error %d\n", rv);
> > + return rv;
> > + }
> > +
> > + wait_event_interruptible_timeout(client_data->cmd_resp_wait,
> > + client_data->flag_response,
> > + ISHTP_SEND_TIMEOUT);
> > + if (!client_data->flag_response) {
> > + dev_err(cl_data_to_dev(client_data),
> > + "Timed out for response to command=%02lx",
> > + out_hdr->command & CMD_MASK);
> > + return -ETIMEDOUT;
> > + }
> > +
> > + /* All response messages will contain a header */
> > + data_len = client_data->response_size;
> > + in_hdr = (struct loader_msg_hdr *)client_data->response_data;
> > +
> > + /* Sanity checks */
> > + if (!(in_hdr->command & IS_RESPONSE)) {
> > + dev_err(cl_data_to_dev(client_data),
> > + "Invalid response to command\n");
> > + return -EIO;
> > + }
> > +
> > + if (in_hdr->status) {
> > + dev_err(cl_data_to_dev(client_data),
> > + "Loader returned status %d\n",
> > + in_hdr->status);
> > + return -EIO;
> > + }
> > +
> > + return data_len;
> > +}
> > +
> > +/**
> > + * process_recv() - Receive and parse incoming packet
> > + * @loader_ishtp_cl: Client instance to get stats
> > + * @rb_in_proc: ISH received message buffer
> > + *
> > + * Parse the incoming packet. If it is a response packet then it
> > will
> > + * update flag_response and wake up the caller waiting to for the
> > response.
> > + */
> > +static void process_recv(struct ishtp_cl *loader_ishtp_cl,
> > + struct ishtp_cl_rb *rb_in_proc)
> > +{
> > + size_t data_len = rb_in_proc->buf_idx;
> > + struct loader_msg_hdr *hdr =
> > + (struct loader_msg_hdr *)rb_in_proc->buffer.data;
> > + struct ishtp_cl_data *client_data =
> > + ishtp_get_client_data(loader_ishtp_cl);
> > +
> > + /*
> > + * All firmware messages have a header. Check buffer size
> > + * before accessing elements inside.
> > + */
> > + if (data_len < sizeof(struct loader_msg_hdr)) {
> > + dev_err(cl_data_to_dev(client_data),
> > + "data size %zu is less than header %zu\n",
> > + data_len, sizeof(struct loader_msg_hdr));
> > + report_bad_packet(client_data->loader_ishtp_cl, hdr);
> > + goto end_error;
> > + }
> > +
> > + dev_dbg(cl_data_to_dev(client_data),
> > + "%s: command=%02lx is_response=%u status=%02x\n",
> > + __func__,
> > + hdr->command & CMD_MASK,
> > + hdr->command & IS_RESPONSE ? 1 : 0,
> > + hdr->status);
> > +
> > + switch (hdr->command & CMD_MASK) {
> > + case LOADER_CMD_XFER_QUERY:
> > + case LOADER_CMD_XFER_FRAGMENT:
> > + case LOADER_CMD_START:
> > + /* Sanity check */
> > + if (client_data->response_data || client_data-
> > >flag_response) {
> > + dev_err(cl_data_to_dev(client_data),
> > + "Buffer overrun: previous firmware
> > message not yet processed\n");
> > + report_bad_packet(client_data->loader_ishtp_cl,
> > hdr);
> > + break;
> > + }
> > +
> > + /*
> > + * Copy the buffer received in firmware response for
> > the
> > + * calling thread.
> > + */
> > + client_data->response_data = kmalloc(data_len,
> > GFP_KERNEL);
> > + if (!client_data->response_data)
> > + break;
> > +
> > + memcpy(client_data->response_data,
> > + rb_in_proc->buffer.data, data_len);
> > + client_data->response_size = data_len;
> > +
> > + /* Free the buffer */
> > + ishtp_cl_io_rb_recycle(rb_in_proc);
> > + rb_in_proc = NULL;
> > +
> > + /* Wake the calling thread */
> > + client_data->flag_response = true;
> > + wake_up_interruptible(&client_data->cmd_resp_wait);
> > + break;
> > +
> > + default:
> > + dev_err(cl_data_to_dev(client_data),
> > + "Invalid command=%02lx\n",
> > + hdr->command & CMD_MASK);
> > + report_bad_packet(client_data->loader_ishtp_cl, hdr);
> > + }
> > +
> > +end_error:
> > + /* Free the buffer if we did not do above */
> > + if (rb_in_proc)
> > + ishtp_cl_io_rb_recycle(rb_in_proc);
> > +}
> > +
> > +/**
> > + * loader_cl_event_cb() - bus driver callback for incoming message
> > + * @device: Pointer to the the ishtp client device for
> > which
> > + * this message is targeted
> > + *
> > + * Remove the packet from the list and process the message by
> > calling
> > + * process_recv
> > + */
> > +static void loader_cl_event_cb(struct ishtp_cl_device *cl_device)
> > +{
> > + struct ishtp_cl_rb *rb_in_proc;
> > + struct ishtp_cl_data *client_data;
> > + struct ishtp_cl *loader_ishtp_cl =
> > ishtp_get_drvdata(cl_device);
> > +
> > + client_data = ishtp_get_client_data(loader_ishtp_cl);
> > +
> > + while ((rb_in_proc = ishtp_cl_rx_get_rb(loader_ishtp_cl)) !=
> > NULL) {
> > + if (!rb_in_proc->buffer.data) {
> > + dev_warn(cl_data_to_dev(client_data),
> > + "rb_in_proc->buffer.data returned
> > null");
> > + continue;
> > + }
> > +
> > + /* Process the data packet from firmware */
> > + process_recv(loader_ishtp_cl, rb_in_proc);
> > + }
> > +}
> > +
> > +/**
> > + * ish_query_loader_prop() - Query ISH Shim firmware loader
> > + * @client_data: Client data instance
> > + * @fw: Poiner to fw data struct in host memory
> > + *
> > + * This function queries the ISH Shim firmware loader for
> > capabilities.
> > + *
> > + * Return: 0 for success, negative error code for failure.
> > + */
> > +static int ish_query_loader_prop(struct ishtp_cl_data *client_data,
> > + const struct firmware *fw,
> > + struct shim_fw_info *fw_info)
> > +{
> > + int rv;
> > + size_t data_len;
> > + struct loader_msg_hdr *hdr;
> > + struct loader_xfer_query ldr_xfer_query;
> > + struct loader_xfer_query_response *ldr_xfer_query_resp;
> > +
> > + memset(&ldr_xfer_query, 0, sizeof(ldr_xfer_query));
> > + ldr_xfer_query.hdr.command = LOADER_CMD_XFER_QUERY;
> > + ldr_xfer_query.image_size = fw->size;
> > + rv = loader_cl_send(client_data,
> > + (u8 *)&ldr_xfer_query,
> > + sizeof(ldr_xfer_query));
> > + if (rv < 0) {
> > + client_data->flag_retry = true;
> > + goto end_error;
> > + }
> > +
> > + /* Check buffer size before accessing the elements */
> > + data_len = client_data->response_size;
> > + if (data_len != sizeof(struct loader_xfer_query_response)) {
> > + dev_err(cl_data_to_dev(client_data),
> > + "data size %zu is not equal to size of
> > loader_xfer_query_response %zu\n",
> > + data_len, sizeof(struct
> > loader_xfer_query_response));
> > + hdr = (struct loader_msg_hdr *)client_data-
> > >response_data;
> > + report_bad_packet(client_data->loader_ishtp_cl, hdr);
> > + client_data->flag_retry = true;
> > + rv = -EMSGSIZE;
> > + goto end_error;
> > + }
> > +
> > + /* Save fw_info for use outside this function */
> > + ldr_xfer_query_resp =
> > + (struct loader_xfer_query_response *)client_data-
> > >response_data;
> > + *fw_info = ldr_xfer_query_resp->fw_info;
> > +
> > + /* Loader firmware properties */
> > + dev_dbg(cl_data_to_dev(client_data),
> > + "ish_fw_version: major=%d minor=%d hotfix=%d build=%d
> > protocol_version=0x%x loader_version=%d\n",
> > + fw_info->ish_fw_version.major,
> > + fw_info->ish_fw_version.minor,
> > + fw_info->ish_fw_version.hotfix,
> > + fw_info->ish_fw_version.build,
> > + fw_info->protocol_version,
> > + fw_info->ldr_version.value);
> > +
> > + dev_dbg(cl_data_to_dev(client_data),
> > + "loader_capability: max_fw_image_size=0x%x xfer_mode=%d
> > max_dma_buf_size=0x%x dma_buf_size_limit=0x%x\n",
> > + fw_info->ldr_capability.max_fw_image_size,
> > + fw_info->ldr_capability.xfer_mode,
> > + fw_info->ldr_capability.max_dma_buf_size,
> > + dma_buf_size_limit);
> > +
> > + /* Sanity checks */
> > + if (fw_info->ldr_capability.max_fw_image_size < fw->size) {
> > + dev_err(cl_data_to_dev(client_data),
> > + "ISH firmware size %zu is greater than Shim
> > firmware loader max supported %d\n",
> > + fw->size,
> > + fw_info->ldr_capability.max_fw_image_size);
> > + rv = -ENOSPC;
> > + goto end_error;
> > + }
> > +
> > + /* For DMA the buffer size should be multiple of cacheline size
> > */
> > + if ((fw_info->ldr_capability.xfer_mode &
> > LOADER_XFER_MODE_DIRECT_DMA) &&
> > + (fw_info->ldr_capability.max_dma_buf_size %
> > L1_CACHE_BYTES)) {
> > + dev_err(cl_data_to_dev(client_data),
> > + "Shim firmware loader buffer size %d should be
> > multipe of cacheline\n",
> > + fw_info->ldr_capability.max_dma_buf_size);
> > + rv = -EINVAL;
> > + goto end_error;
> > + }
> > +
> > +end_error:
> > + /* Free ISH buffer if not done so in error case */
> > + kfree(client_data->response_data);
> > + client_data->response_data = NULL;
> > + return rv;
> > +}
> > +
> > +/**
> > + * ish_fw_xfer_ishtp() Loads ISH firmware using ishtp
> > interface
> > + * @client_data: Client data instance
> > + * @fw: Pointer to fw data struct in host
> > memory
> > + *
> > + * This function uses ISH-TP to transfer ISH firmware from host to
> > + * ISH SRAM. Lower layers may use IPC or DMA depending on firmware
> > + * support.
> > + *
> > + * Return: 0 for success, negative error code for failure.
> > + */
> > +static int ish_fw_xfer_ishtp(struct ishtp_cl_data *client_data,
> > + const struct firmware *fw)
> > +{
> > + int rv;
> > + u32 fragment_offset, fragment_size, payload_max_size;
> > + struct loader_xfer_ipc_fragment *ldr_xfer_ipc_frag;
> > +
> > + payload_max_size =
> > + LOADER_SHIM_IPC_BUF_SIZE - IPC_FRAGMENT_DATA_PREAMBLE;
> > +
> > + ldr_xfer_ipc_frag = kzalloc(LOADER_SHIM_IPC_BUF_SIZE,
> > GFP_KERNEL);
> > + if (!ldr_xfer_ipc_frag) {
> > + client_data->flag_retry = true;
> > + return -ENOMEM;
> > + }
> > +
> > + ldr_xfer_ipc_frag->fragment.hdr.command =
> > LOADER_CMD_XFER_FRAGMENT;
> > + ldr_xfer_ipc_frag->fragment.xfer_mode = LOADER_XFER_MODE_ISHTP;
> > +
> > + /* Break the firmware image into fragments and send as ISH-TP
> > payload */
> > + fragment_offset = 0;
> > + while (fragment_offset < fw->size) {
> > + if (fragment_offset + payload_max_size < fw->size) {
> > + fragment_size = payload_max_size;
> > + ldr_xfer_ipc_frag->fragment.is_last = 0;
> > + } else {
> > + fragment_size = fw->size - fragment_offset;
> > + ldr_xfer_ipc_frag->fragment.is_last = 1;
> > + }
> > +
> > + ldr_xfer_ipc_frag->fragment.offset = fragment_offset;
> > + ldr_xfer_ipc_frag->fragment.size = fragment_size;
> > + memcpy(ldr_xfer_ipc_frag->data,
> > + &fw->data[fragment_offset],
> > + fragment_size);
> > +
> > + dev_dbg(cl_data_to_dev(client_data),
> > + "xfer_mode=ipc offset=0x%08x size=0x%08x
> > is_last=%d\n",
> > + ldr_xfer_ipc_frag->fragment.offset,
> > + ldr_xfer_ipc_frag->fragment.size,
> > + ldr_xfer_ipc_frag->fragment.is_last);
> > +
> > + rv = loader_cl_send(client_data,
> > + (u8 *)ldr_xfer_ipc_frag,
> > + IPC_FRAGMENT_DATA_PREAMBLE +
> > fragment_size);
> > + if (rv < 0) {
> > + client_data->flag_retry = true;
> > + goto end_err_resp_buf_release;
> > + }
> > +
> > + /* Free ISH buffer once response is processed */
> > + kfree(client_data->response_data);
> > + client_data->response_data = NULL;
> > +
> > + fragment_offset += fragment_size;
> > + }
> > +
> > + kfree(ldr_xfer_ipc_frag);
> > + return 0;
> > +
> > +end_err_resp_buf_release:
> > + /* Free ISH buffer if not done already, in error case */
> > + kfree(client_data->response_data);
> > + client_data->response_data = NULL;
> > + kfree(ldr_xfer_ipc_frag);
> > + return rv;
> > +}
> > +
> > +/**
> > + * ish_fw_xfer_direct_dma() - Loads ISH firmware using direct dma
> > + * @client_data: Client data instance
> > + * @fw: Poiner to fw data struct in host memory
> > + *
> > + * Host firmware load is a unique case where we need to download
> > + * a large firmware image (200+ Kb). This function implements
> > + * direct DMA transfer in kernel and ISH firmware. This allows
> > + * us to overcome the ISH-TP 4 Kb limit, and allows us to DMA
> > + * directly to ISH UMA at location of choice.
> > + * Function depends on corresponding support in ISH firmware.
> > + *
> > + * Return: 0 for success, negative error code for failure.
> > + */
> > +static int ish_fw_xfer_direct_dma(struct ishtp_cl_data *client_data,
> > + const struct firmware *fw,
> > + struct shim_fw_info fw_info)
> > +{
> > + int rv;
> > + void *dma_buf;
> > + dma_addr_t dma_buf_phy;
> > + u32 fragment_offset, fragment_size, payload_max_size;
> > + struct loader_xfer_dma_fragment ldr_xfer_dma_frag;
> > + struct device *devc = ishtp_get_pci_device(client_data-
> > >cl_device);
> > + u32 shim_fw_buf_size =
> > + fw_info.ldr_capability.max_dma_buf_size;
> > +
> > + /*
> > + * payload_max_size should be set to minimum of
> > + * (1) Size of firmware to be loaded,
> > + * (2) Max DMA buf size supported by Shim firmware,
> > + * (3) DMA buffer size limit set by boot_param
> > dma_buf_size_limit.
> > + */
> > + payload_max_size = min3(fw->size,
> > + (size_t)shim_fw_buf_size,
> > + (size_t)dma_buf_size_limit);
> > +
> > + /*
> > + * Buffer size should be multiple of cacheline size
> > + * if it's not, select the previous cacheline boundary.
> > + */
> > + payload_max_size &= ~(L1_CACHE_BYTES - 1);
> > +
> > + dma_buf = kmalloc(payload_max_size, GFP_KERNEL | GFP_DMA32);
> > + if (!dma_buf) {
> > + client_data->flag_retry = true;
> > + return -ENOMEM;
> > + }
> > +
> > + dma_buf_phy = dma_map_single(devc, dma_buf, payload_max_size,
> > + DMA_TO_DEVICE);
> > + if (dma_mapping_error(devc, dma_buf_phy)) {
> > + dev_err(cl_data_to_dev(client_data), "DMA map
> > failed\n");
> > + client_data->flag_retry = true;
> > + rv = -ENOMEM;
> > + goto end_err_dma_buf_release;
> > + }
> > +
> > + ldr_xfer_dma_frag.fragment.hdr.command =
> > LOADER_CMD_XFER_FRAGMENT;
> > + ldr_xfer_dma_frag.fragment.xfer_mode =
> > LOADER_XFER_MODE_DIRECT_DMA;
> > + ldr_xfer_dma_frag.ddr_phys_addr = (u64)dma_buf_phy;
> > +
> > + /* Send the firmware image in chucks of payload_max_size */
> > + fragment_offset = 0;
> > + while (fragment_offset < fw->size) {
> > + if (fragment_offset + payload_max_size < fw->size) {
> > + fragment_size = payload_max_size;
> > + ldr_xfer_dma_frag.fragment.is_last = 0;
> > + } else {
> > + fragment_size = fw->size - fragment_offset;
> > + ldr_xfer_dma_frag.fragment.is_last = 1;
> > + }
> > +
> > + ldr_xfer_dma_frag.fragment.offset = fragment_offset;
> > + ldr_xfer_dma_frag.fragment.size = fragment_size;
> > + memcpy(dma_buf, &fw->data[fragment_offset],
> > fragment_size);
> > +
> > + dma_sync_single_for_device(devc, dma_buf_phy,
> > + payload_max_size,
> > + DMA_TO_DEVICE);
> > +
> > + /*
> > + * Flush cache here because the
> > dma_sync_single_for_device()
> > + * does not do for x86.
> > + */
> > + clflush_cache_range(dma_buf, payload_max_size);
> > +
> > + dev_dbg(cl_data_to_dev(client_data),
> > + "xfer_mode=dma offset=0x%08x size=0x%x
> > is_last=%d ddr_phys_addr=0x%016llx\n",
> > + ldr_xfer_dma_frag.fragment.offset,
> > + ldr_xfer_dma_frag.fragment.size,
> > + ldr_xfer_dma_frag.fragment.is_last,
> > + ldr_xfer_dma_frag.ddr_phys_addr);
> > +
> > + rv = loader_cl_send(client_data,
> > + (u8 *)&ldr_xfer_dma_frag,
> > + sizeof(ldr_xfer_dma_frag));
> > + if (rv < 0) {
> > + client_data->flag_retry = true;
> > + goto end_err_resp_buf_release;
> > + }
> > +
> > + /* Free ISH buffer once response is processed */
> > + kfree(client_data->response_data);
> > + client_data->response_data = NULL;
> > +
> > + fragment_offset += fragment_size;
> > + }
> > +
> > + dma_unmap_single(devc, dma_buf_phy, payload_max_size,
> > DMA_TO_DEVICE);
> > + kfree(dma_buf);
> > + return 0;
> > +
> > +end_err_resp_buf_release:
> > + /* Free ISH buffer if not done already, in error case */
> > + kfree(client_data->response_data);
> > + client_data->response_data = NULL;
> > + dma_unmap_single(devc, dma_buf_phy, payload_max_size,
> > DMA_TO_DEVICE);
> > +end_err_dma_buf_release:
> > + kfree(dma_buf);
> > + return rv;
> > +}
> > +
> > +/**
> > + * ish_fw_start() Start executing ISH main firmware
> > + * @client_data: client data instance
> > + *
> > + * This function sends message to Shim firmware loader to start
> > + * the execution of ISH main firmware.
> > + *
> > + * Return: 0 for success, negative error code for failure.
> > + */
> > +static int ish_fw_start(struct ishtp_cl_data *client_data)
> > +{
> > + int rv;
> > + struct loader_start ldr_start;
> > +
> > + memset(&ldr_start, 0, sizeof(ldr_start));
> > + ldr_start.hdr.command = LOADER_CMD_START;
> > + rv = loader_cl_send(client_data,
> > + (u8 *)&ldr_start,
> > + sizeof(ldr_start));
> > +
> > + /* Free ISH buffer once response is processed */
> > + kfree(client_data->response_data);
> > + client_data->response_data = NULL;
> > + return rv;
> > +}
> > +
> > +/**
> > + * load_fw_from_host() Loads ISH firmware from host
> > + * @client_data: Client data instance
> > + *
> > + * This function loads the ISH firmware to ISH sram and starts
> > execution
> > + *
> > + * Return: 0 for success, negative error code for failure.
> > + */
> > +static int load_fw_from_host(struct ishtp_cl_data *client_data)
> > +{
> > + int rv;
> > + u32 xfer_mode;
> > + char *filename;
> > + const struct firmware *fw;
> > + struct shim_fw_info fw_info;
> > +
> > + client_data->flag_retry = false;
> > +
> > + filename = kzalloc(FILENAME_SIZE, GFP_KERNEL);
> > + if (!filename) {
> > + rv = -ENOMEM;
> > + goto end_error;
> > + }
> > +
> > + /* Get filename of the ISH firmware to be loaded */
> > + rv = get_firmware_variant(client_data, filename);
> > + if (rv < 0)
> > + goto end_err_filename_buf_release;
> > +
> > + rv = request_firmware(&fw, filename,
> > cl_data_to_dev(client_data));
> > + if (rv < 0)
> > + goto end_err_filename_buf_release;
> > +
> > + /* Step 1: Query Shim firmware loader properties */
> > +
> > + rv = ish_query_loader_prop(client_data, fw, &fw_info);
> > + if (rv < 0)
> > + goto end_err_fw_release;
> > +
> > + /* Step 2: Send the main firmware image to be loaded, to ISH
> > sram */
> > +
> > + xfer_mode = fw_info.ldr_capability.xfer_mode;
> > + if (xfer_mode & LOADER_XFER_MODE_DIRECT_DMA) {
> > + rv = ish_fw_xfer_direct_dma(client_data, fw, fw_info);
> > + } else if (xfer_mode & LOADER_XFER_MODE_ISHTP) {
> > + rv = ish_fw_xfer_ishtp(client_data, fw);
> > + } else {
> > + dev_err(cl_data_to_dev(client_data),
> > + "No transfer mode selected in firmware\n");
> > + rv = -EINVAL;
> > + }
> > + if (rv < 0)
> > + goto end_err_fw_release;
> > +
> > + /* Step 3: Start ISH main firmware exeuction */
> > +
> > + rv = ish_fw_start(client_data);
> > + if (rv < 0)
> > + goto end_err_fw_release;
> > +
> > + release_firmware(fw);
> > + kfree(filename);
> > + dev_info(cl_data_to_dev(client_data), "ISH firmware %s
> > loaded\n",
> > + filename);
> > + return 0;
> > +
> > +end_err_fw_release:
> > + release_firmware(fw);
> > +end_err_filename_buf_release:
> > + kfree(filename);
> > +end_error:
> > + if (client_data->flag_retry) {
> > + dev_warn(cl_data_to_dev(client_data),
> > + "ISH host firmware load failed %d. Reset ISH &
> > try again..\n",
> > + rv);
> > + loader_ish_hw_reset(client_data->loader_ishtp_cl);
> > + } else {
> > + dev_err(cl_data_to_dev(client_data),
> > + "ISH host firmware load failed %d\n", rv);
> > + }
> > + return rv;
> > +}
> > +
> > +static void load_fw_from_host_handler(struct work_struct *work)
> > +{
> > + struct ishtp_cl_data *client_data;
> > +
> > + client_data = container_of(work, struct ishtp_cl_data,
> > + work_fw_load);
> > + load_fw_from_host(client_data);
> > +}
> > +
> > +/**
> > + * loader_init() - Init function for ISH-TP client
> > + * @loader_ishtp_cl: ISH-TP client instance
> > + * @reset: true if called for init after reset
> > + *
> > + * Return: 0 for success, negative error code for failure
> > + */
> > +static int loader_init(struct ishtp_cl *loader_ishtp_cl, int reset)
> > +{
> > + int rv;
> > + struct ishtp_fw_client *fw_client;
> > + struct ishtp_cl_data *client_data =
> > + ishtp_get_client_data(loader_ishtp_cl);
> > +
> > + dev_dbg(cl_data_to_dev(client_data), "reset flag: %d\n",
> > reset);
> > +
> > + rv = ishtp_cl_link(loader_ishtp_cl);
> > + if (rv < 0) {
> > + dev_err(cl_data_to_dev(client_data), "ishtp_cl_link
> > failed\n");
> > + return rv;
> > + }
> > +
> > + /* Connect to firmware client */
> > + ishtp_set_tx_ring_size(loader_ishtp_cl,
> > LOADER_CL_TX_RING_SIZE);
> > + ishtp_set_rx_ring_size(loader_ishtp_cl,
> > LOADER_CL_RX_RING_SIZE);
> > +
> > + fw_client =
> > + ishtp_fw_cl_get_client(ishtp_get_ishtp_device(loader_is
> > htp_cl),
> > + &loader_ishtp_guid);
> > + if (!fw_client) {
> > + dev_err(cl_data_to_dev(client_data),
> > + "ISH client uuid not found\n");
> > + rv = -ENOENT;
> > + goto err_cl_unlink;
> > + }
> > +
> > + ishtp_cl_set_fw_client_id(loader_ishtp_cl,
> > + ishtp_get_fw_client_id(fw_client));
> > + ishtp_set_connection_state(loader_ishtp_cl,
> > ISHTP_CL_CONNECTING);
> > +
> > + rv = ishtp_cl_connect(loader_ishtp_cl);
> > + if (rv < 0) {
> > + dev_err(cl_data_to_dev(client_data), "Client connect
> > fail\n");
> > + goto err_cl_unlink;
> > + }
> > +
> > + dev_dbg(cl_data_to_dev(client_data), "Client connected\n");
> > +
> > + ishtp_register_event_cb(client_data->cl_device,
> > loader_cl_event_cb);
> > +
> > + return 0;
> > +
> > +err_cl_unlink:
> > + ishtp_cl_unlink(loader_ishtp_cl);
> > + return rv;
> > +}
> > +
> > +static void loader_deinit(struct ishtp_cl *loader_ishtp_cl)
> > +{
> > + ishtp_set_connection_state(loader_ishtp_cl,
> > ISHTP_CL_DISCONNECTING);
> > + ishtp_cl_disconnect(loader_ishtp_cl);
> > + ishtp_cl_unlink(loader_ishtp_cl);
> > + ishtp_cl_flush_queues(loader_ishtp_cl);
> > +
> > + /* Disband and free all Tx and Rx client-level rings */
> > + ishtp_cl_free(loader_ishtp_cl);
> > +}
> > +
> > +static void reset_handler(struct work_struct *work)
> > +{
> > + int rv;
> > + struct ishtp_cl_data *client_data;
> > + struct ishtp_cl *loader_ishtp_cl;
> > + struct ishtp_cl_device *cl_device;
> > +
> > + client_data = container_of(work, struct ishtp_cl_data,
> > + work_ishtp_reset);
> > +
> > + loader_ishtp_cl = client_data->loader_ishtp_cl;
> > + cl_device = client_data->cl_device;
> > +
> > + /* Unlink, flush queues & start again */
> > + ishtp_cl_unlink(loader_ishtp_cl);
> > + ishtp_cl_flush_queues(loader_ishtp_cl);
> > + ishtp_cl_free(loader_ishtp_cl);
> > +
> > + loader_ishtp_cl = ishtp_cl_allocate(cl_device);
> > + if (!loader_ishtp_cl)
> > + return;
> > +
> > + ishtp_set_drvdata(cl_device, loader_ishtp_cl);
> > + ishtp_set_client_data(loader_ishtp_cl, client_data);
> > + client_data->loader_ishtp_cl = loader_ishtp_cl;
> > + client_data->cl_device = cl_device;
> > +
> > + rv = loader_init(loader_ishtp_cl, 1);
> > + if (rv < 0) {
> > + dev_err(ishtp_device(cl_device), "Reset Failed\n");
> > + return;
> > + }
> > +
> > + /* ISH firmware loading from host */
> > + load_fw_from_host(client_data);
> > +}
> > +
> > +/**
> > + * loader_ishtp_cl_probe() - ISH-TP client driver probe
> > + * @cl_device: ISH-TP client device instance
> > + *
> > + * This function gets called on device create on ISH-TP bus
> > + *
> > + * Return: 0 for success, negative error code for failure
> > + */
> > +static int loader_ishtp_cl_probe(struct ishtp_cl_device *cl_device)
> > +{
> > + struct ishtp_cl *loader_ishtp_cl;
> > + struct ishtp_cl_data *client_data;
> > + int rv;
> > +
> > + client_data = devm_kzalloc(ishtp_device(cl_device),
> > + sizeof(*client_data),
> > + GFP_KERNEL);
> > + if (!client_data)
> > + return -ENOMEM;
> > +
> > + loader_ishtp_cl = ishtp_cl_allocate(cl_device);
> > + if (!loader_ishtp_cl)
> > + return -ENOMEM;
> > +
> > + ishtp_set_drvdata(cl_device, loader_ishtp_cl);
> > + ishtp_set_client_data(loader_ishtp_cl, client_data);
> > + client_data->loader_ishtp_cl = loader_ishtp_cl;
> > + client_data->cl_device = cl_device;
> > +
> > + init_waitqueue_head(&client_data->cmd_resp_wait);
> > +
> > + INIT_WORK(&client_data->work_ishtp_reset,
> > + reset_handler);
> > + INIT_WORK(&client_data->work_fw_load,
> > + load_fw_from_host_handler);
> > +
> > + rv = loader_init(loader_ishtp_cl, 0);
> > + if (rv < 0) {
> > + ishtp_cl_free(loader_ishtp_cl);
> > + return rv;
> > + }
> > + ishtp_get_device(cl_device);
> > +
> > + /* ISH firmware loading from host */
> > + schedule_work(&client_data->work_fw_load);
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * loader_ishtp_cl_remove() - ISH-TP client driver remove
> > + * @cl_device: ISH-TP client device instance
> > + *
> > + * This function gets called on device remove on ISH-TP bus
> > + *
> > + * Return: 0
> > + */
> > +static int loader_ishtp_cl_remove(struct ishtp_cl_device *cl_device)
> > +{
> > + struct ishtp_cl_data *client_data;
> > + struct ishtp_cl *loader_ishtp_cl =
> > ishtp_get_drvdata(cl_device);
> > +
> > + client_data = ishtp_get_client_data(loader_ishtp_cl);
> > +
> > + /*
> > + * The sequence of the following two cancel_work_sync() is
> > + * important. The work_fw_load can in turn schedue
> > + * work_ishtp_reset, so first cancel work_fw_load then
> > + * cancel work_ishtp_reset.
> > + */
> > + cancel_work_sync(&client_data->work_fw_load);
> > + cancel_work_sync(&client_data->work_ishtp_reset);
> > + loader_deinit(loader_ishtp_cl);
> > + ishtp_put_device(cl_device);
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * loader_ishtp_cl_reset() - ISH-TP client driver reset
> > + * @cl_device: ISH-TP client device instance
> > + *
> > + * This function gets called on device reset on ISH-TP bus
> > + *
> > + * Return: 0
> > + */
> > +static int loader_ishtp_cl_reset(struct ishtp_cl_device *cl_device)
> > +{
> > + struct ishtp_cl_data *client_data;
> > + struct ishtp_cl *loader_ishtp_cl =
> > ishtp_get_drvdata(cl_device);
> > +
> > + client_data = ishtp_get_client_data(loader_ishtp_cl);
> > +
> > + schedule_work(&client_data->work_ishtp_reset);
> > +
> > + return 0;
> > +}
> > +
> > +static struct ishtp_cl_driver loader_ishtp_cl_driver = {
> > + .name = "ish-loader",
> > + .guid = &loader_ishtp_guid,
> > + .probe = loader_ishtp_cl_probe,
> > + .remove = loader_ishtp_cl_remove,
> > + .reset = loader_ishtp_cl_reset,
> > +};
> > +
> > +static int __init ish_loader_init(void)
> > +{
> > + return ishtp_cl_driver_register(&loader_ishtp_cl_driver,
> > THIS_MODULE);
> > +}
> > +
> > +static void __exit ish_loader_exit(void)
> > +{
> > + ishtp_cl_driver_unregister(&loader_ishtp_cl_driver);
> > +}
> > +
> > +late_initcall(ish_loader_init);
> > +module_exit(ish_loader_exit);
> > +
> > +module_param(dma_buf_size_limit, int, 0644);
> > +MODULE_PARM_DESC(dma_buf_size_limit, "Limit the DMA buf size to this
> > value in bytes");
> > +
> > +MODULE_DESCRIPTION("ISH ISH-TP Host firmware Loader Client Driver");
> > +MODULE_AUTHOR("Rushikesh S Kadam <rushikesh.s.kadam@...el.com>");
> > +
> > +MODULE_LICENSE("GPL v2");
> > +MODULE_ALIAS("ishtp:*");
>
Powered by blists - more mailing lists